No video
bomag 120 sl roller repair - brake engaging
Рет қаралды 6,935
2 жыл бұрынthe brake was engaging at low speeds going forward or reverse. The issue was a sensor under the seat.
move the sensor away from the mechanism enough so that it doesn't engage the brake.
hope this video helps.
like please
#bomag #roller #asphalt #repair #bomagroller #construction
@TheRealCannonCooper 2 ай бұрын
After pulling mine apart. I’ve found that the reason for the brake locking up is slack in the handle due to the plastic bushing sliding out of the tube that rotates on the shaft. At 5:47 you can clearly see bushing slid far right it needs put back into the tube on the left.
@donuli7222 2 ай бұрын
You could be right, but the handle on mine didn't have much play. Hasn't locked up anymore. Thanks for the tip though.
@user-fr9ub4nd3f 6 ай бұрын
Just wire the connection job done
@chivas1283 2 жыл бұрын
Did you need to put a weight on the seat to disengage the brakes due to some machines having weight sensitivity
@donuli7222 2 жыл бұрын
No weight on the seat was needed during the repair. I put it all back together and sat on seat to try it out.
@TheRealCannonCooper 2 ай бұрын
I wonder if I could put that brake on a switch
@salexisgonzalezvicencio-uz4dg Жыл бұрын
El problema no era el sensor el buje de plástico no está en su pocicion
@rogeliolazaro8411 Жыл бұрын
Had the same issue. I put the plastic bushing back in its place and and it fixed the braking issue. Thank you.
@TheRealCannonCooper 2 ай бұрын
Where does the bushing go which bushing are we talking about?
@aboudiallo3259 2 жыл бұрын
Salut maître j'ai une bomag 120 roule pas avan arrière
Teguh Putra Derek
Рет қаралды 1,2 М.
Asian Skills Media
Рет қаралды 3,7 М.
The Based Conservative
Рет қаралды 1,3 МЛН
Garage 54
Рет қаралды 4,3 МЛН
Mercado Vial TV - Un Mundo de Máquinas
Рет қаралды 4,7 М.