Hi Steven, thank you for the correction, I've pinned your comment up!

​@@DarrenYeoYTWhat StevenJ said about 30° + n for calibration!!! I need to ask you how you knew your light was at 32°C ? The calibration of the light's temperature should be done at room temperature, never when it's warmed up. And it needs to be done ASAP. For most individuals room temperature would be 18-22°C. 32° just doesn't sound right. Do you know about long presses for calibration and programming in Anduril 2? One long press, which is about a second to a second and a half, is equal to 10 quick presses . So two long presses and two quick presses equals 22 presses, and four long presses and seven quick presses equals 47 quick presses. Much easier to do and count.

@@craigs7181 Thanks for the tip about those long press button.. i have tested it and easier to use that method..

Anyway what is the maximum step down temperature i can set on anduril 2 ? is it 75celcius ? because i want to set to maximum as it can.. i dont mind the heat as i want to manually step it down if my hand can no longer hold the heat.

@@harisyoung4110 You are quite welcome! I highly recommend downloading the Anduril 2 "text manual" or better yet, make a shortcut to it. It thoroughly explains all the options Anduril 2 has, and it is staggering! Far more than any included manual will provide. Many options may not be available on a light simply because the light may not have tint shifting, or dual channels, or auxiliary led's, as a few examples. Or the firmware in your light may not be new enough for it to have all the options available. One neat option I wanted to try was the "soft" stepping mode, but unfortunately none of my lights have this feature because the firmware isn't new enough. You will be stunned by all the options that "may" be available to you to further customize your lights to your liking!

I read somewhere that the electronics can handle 60C easily but the battery is the issue 😅 also, the light becomes to hot to hold!

Cheers! Just gotta change it once when you get the light.

@@DarrenYeoYT definitely. Mine should be in this week!

Hi Meor, awesome, so you set it to 55-60? It's a nice little EDC and I haven't had it switch on in my pocket.. which is common in side switch lights. Thanks for watching man.

@@DarrenYeoYT Yes, I set it on 55c and see how it goes for a few days. Actually it does get abit toasty after the 1st minute but I would say it does hold for longer. As it is even on high it is good enough for work/play and having that turbo available is great too. So far its a keeper. Cheers

I think 65C is highest - can't remember exactly. I don't use Anduril flashlights much these days.

@@DarrenYeoYT thanks man!

​@@DarrenYeoYTwhat I'd like to see is more tail switch flashlights that have Anduril!!...like the TS10 has but in a bigger single emitter host. ✌️

Appreciate your support Bruce! It's some sort of weird addiction for me? Haha.

Wk03 isn't an Anduril light so not possible

Yeah, I heard this too. But check the max operating temp of the battery - that's mainly my worry.

@@DarrenYeoYT thanks for the heads up appreciate it

Yeah same

If you don't cook the electronics 😆

Seems to use the same clip as the sp35 if you are talking about a sofirn flashlight. The clip is on their website

@@thebetterrug Thank you, but how can the sofirn if25 power bank work ?, can you tell.

@@user-te3xh7df5o Im sorry I have no idea how that works but if I pick one up I will msg you here

If it has a USB-C port then it can charge from powerbank!

Hi there, the clip is from my Sofirn SP35. They can be purchased separately from the sofirn official store. Unfortunately there is no USB C to C charging on my IF25a.

It works for both. I only have the SFT40 version these days.

@@DarrenYeoYT ok tks sir..

2

Haha, damn I'm not game enough for that 😂

@@DarrenYeoYT I have the sofirn q8 plus and run the p45b. At 60 seconds it’s pushing 175 degrees. I can touch it quickly and that’s it.