Thanks, Martin. When you said "We will now make a small cut in the rails" I was taking a drink of diet Pepsi. Now I have to wash off my computer monitor.
@marklinofsweden4 жыл бұрын
👍😄😄😄
@2004alexs3 жыл бұрын
Damn flyboy2610 , i was faster 😄😄😄 than you!!!!!!
@ralfderijcke4 жыл бұрын
The chainsaw piece, epic 🤣
@draisine16094 жыл бұрын
Your videos are a moment of tranquility in a world of uncertainty. Thank you for keeping them going. Also your voice is very calming at the moment.
@Astranamic Жыл бұрын
Till he screams pulling out a chain saw lol!!
4 жыл бұрын
Although I do not have any train sets, it's joyful to watch and learn new things from you. I hope one day I can build a model railroad for myself, then I will have so many things to do! Best regards.
@georgeandcarolfischer2912 ай бұрын
You can also use a fiberglass pencil, this I found on SMT Mainline. It really does a great job to clean the commutator.
@robbhalverson77252 жыл бұрын
Love your videos! So many great ideas. I have been modeling trains for over 30 years here in the USA, and I learn something new on everyone of your videos. Keep up the great work.
@blameyourself44894 жыл бұрын
Wow! This is really nerdy work. Love it!!!
@ArcadiaJunctionModelTrains4 жыл бұрын
Silver electric solder also works on steel track.
@ErzgebirgsMoBaHO4 жыл бұрын
Servus Marklinofsweden. Das hast du wie immer super gezeigt und erklärt. Danke für das tolle Video. Auch interessant, deine Anlage mal aus anderen Blickwinkeln zu sehen. LG Tino
@THM.miniaturestreetart4 жыл бұрын
Although I am not involved in the world of trains, it is always a pleasure to see your work
@Cloudman5724 жыл бұрын
Thanks for this. I have been using JMRI but have never managed to auto run a train due to JMRI complexity (and flexibility). I will definitely give Rocrail a try.
@thetrainroom4 жыл бұрын
K-Tracks: You can solder on the joiner, so you avoid to use that special flux.
@2railnation3 жыл бұрын
You can also buy joiners with wires already connected.
@kitchenhamfarm2 жыл бұрын
thank you for highlighting this software.................tony
@ModelRailroadTechniques4 жыл бұрын
Very good. I use TrainController
@ignacioaltuna7854 жыл бұрын
¡Estupenda maqueta ferromodelística! Felicitaciones. N.
@evanforst72724 жыл бұрын
8:03 pretty much how I do all my track 😂
@einjen4 жыл бұрын
Fantastiske videoer. Veldig bra stemme. Fantastisk motorsagmassakre. Jeg lo så jeg sprutet kaffe over arbeidsbenken
@ivortomana4 жыл бұрын
Big thanks for the instructional video, 👍👍👍
@manolorodriguez29564 жыл бұрын
Muy bueno, gracias. Greetings from Madrid.
@erikmkiv4 жыл бұрын
8:06 I’m laughing to death 😂😂😂
3 жыл бұрын
Same here! At least I have an excuse for watching this video now even though I run all analog. :-D
@phil363104 жыл бұрын
Hi Martin, Interesting... but I have to watch this a few more times to get all the details. Thanks for sharing. Keep safe & greetings, Filip
@JPoulAndersson4 жыл бұрын
Thank you Very much for this super informative video. I’m not a Märklin guy but love your stuff all the same😀 Cheers Joachim
@eugeneg684 жыл бұрын
Thanks! Very interesting and informative!
@Lennon64124 жыл бұрын
Very enjoyable, I need to get traffic control software. I hope the trains keep you entertained during the pandemic, stay safe!
@TrainQuest-Model-Railroad4 жыл бұрын
Hi Martin I found your video tutorial very interesting. Thanks 🚂
@trafficface2 жыл бұрын
This is why I want a layout of my own, raspberry pi zero!
@robot77593 жыл бұрын
Glad I'm still analog 😁
@TheDarthMushroom4 жыл бұрын
What are your wishes and plans forbyde rest of the year? - should the harbour have a ship and a crain? - what are the funniest gags on your layout? - how did you make that Shotscar?
@cs512tr4 жыл бұрын
8:03 ahhhhhhhhhhhhhhhhhhhhhhhhhhhh LOL !!
@E_734 жыл бұрын
I like your videos. I use a other software but these is similar. Greetings from Germany! Stay healthy! 😊😊😊😊
@benjaminl.2514 жыл бұрын
Thank you, great video! Could you maybe also explain, how you did the automation with signals and the s88 ?
@Cody-et7ok4 жыл бұрын
Hut ab. Du hast viel auf dem kasten 😊
@normanrowe28314 жыл бұрын
Hello. Outstanding! Thanks for another interesting and informative tutorial. Also thanks for the belly laugh. Texas chainsaw modeler. See ya next time.
@jomama054 жыл бұрын
8:05 always cracks me up
@Iamasafetyviolation4 жыл бұрын
Amazing video! Also greetings from Croatia
@stefanvennberg95394 жыл бұрын
About 8:00 in the video... it made my day! :)
@marklinofsweden4 жыл бұрын
👍😄 Tack Stefan! Vad gör man inte för att överraska lite? 😉
@funflyergermany10144 жыл бұрын
Top 👍
@CONFUCIUS-f2x2 жыл бұрын
完美
@GrampiesWorkshop4 жыл бұрын
How's she goin'? This software will surely make the layout way more realistic!!! Pretty neat!!!
@tiesto11023 жыл бұрын
Dear Martin, thank you for the great videos. I see you use M rails in your shadow part. How do you create detection contacts for these, as they are all metal and conducting. Many thanks!
@bananenbuurman3 жыл бұрын
6:42 What kind of IDE cable is that? Is it a superlong one? And is it for signals? or? i find it a very inspiring usage!
@marklinofsweden3 жыл бұрын
It’s a 50-pole flatcable with clamp-on connentors, which I clamped on every 300mm (1ft). I use 2 of them for feedback to the command station (100 feedback wires).You can buy cable and connectors at Digikey, Distralec and even Conrad.
@bananenbuurman3 жыл бұрын
@@marklinofsweden Thanks for the info!! Will definitely use that concept! awesome! :)
@IC-qf7ev4 жыл бұрын
8:06 😂😂😂 best way to do the track
@Lennon64123 жыл бұрын
Very informative!
@SimonTog4 жыл бұрын
Wondeful video :)
@finanzamt4694 жыл бұрын
Greeting from Germany
@KeviNissan3 жыл бұрын
Great moment with the chainsaw 😂😂 however, how wil you do that with M rails? The whole bedding and rails are metal and making always contact.
@Duececoupe4 жыл бұрын
Vad i he-vete var det där med motorsågen!? Det var bara tur att man inte drack kaffe eller te, annars så hade man satt vrångstrupen eller spottat över skärmen!! 😳😲😆😂 Alltid trevligt att se dina videos, ser fram emot nästa! Hoppas att allt är väl! Just realised that I wrote it all in swedish! 😉😆😂
@marklinofsweden4 жыл бұрын
😂😂😂
@petter57213 жыл бұрын
👍🏻👍🏻👍🏻
@Romin.7773 жыл бұрын
hahaha that chainsaw scene! :))
@Tybold634 жыл бұрын
Utmärkt video, ingen onödig musik och du har bra berättarröst. Pysslar inte med modelljärnvägar men beundrar det som en slags konst. I dessa covid-19 tider tror jag videor som den här ger den verklighetsflykt och lugn vi alla behöver :D
@salvadorpalaciomillan97324 жыл бұрын
Sus vídeos son de mucho interés y muchos somos españoles. ¿Porque no ha hecho más vídeos en español?
@JER0EN4 жыл бұрын
I'm not that familiar with rocrail, but if you have a hostname on all of the network devices that normally require a static IP address you could possibly just switch to DHCP and connect to the hostnames.
@marklinofsweden4 жыл бұрын
For network connection methods I would like to refer you to the documentation valid for Rocrail and the command station you have.
@JER0EN4 жыл бұрын
@@marklinofsweden I've taken a quick look at the documentation and it looks like connecting via hostname should be trivial for the rocweb application. Doing a fulltext search of the wiki shows a lot of "Hostname" or "Hostname or IP" matches, so I think that switching to connecting via the hostname could be achievable. I actually use a raspberry pi at home, which is both the DHCP server and DNS server. Usually I connect directly to the devices at home using hostnames of the devices, some of them even have a static DHCP lease and I can manage it all from a simple web UI. If needed I can even make custom DNS responses, it is really handy.
@funflyergermany10144 жыл бұрын
12:22 Et 420 😍😍😍
@tashagoesaert7473 жыл бұрын
Can this also work with a Mobile Station 2? Or only with the Mobile centrale? By the way great videos. I learned already a lot. And wait to see the 4th episode of the model railway from groud up. Greetings from Belgium
@marklinofsweden3 жыл бұрын
No. Sorry. It requires a Central Station 1, 2 or 3.
@mrossainz4 жыл бұрын
Hi !, hope your staying safe. I guess you get this a lot but, why there are no high speed trains in your layout? do not you like them?
@marklinofsweden4 жыл бұрын
European trains travels about 5 - 10 times as fast as US trains. All my trains has been speed calibrated to exactly match prototypic speeds.
@dario867072 жыл бұрын
excuse me how can i give addresses to the sensors to connect z21 with roco detector?
@AyalaBottoModelTrain3 жыл бұрын
Hi, Is it possible to import to RocRail all locomotives of my CS2 60214? Thanks in advance. Regards Ayala Lisbon, Portugal
@bernardhendrik4 жыл бұрын
Nice explanation, I think about starting to with Traffic Control but I am wondering, did you build this system while the scenery on your track was already done? I ask this because it takes a lot of soldering and hiding of wires. And thanks again for the inspiration!
@Roblue10914 жыл бұрын
In your Cleaning and Maintenance tutorial what dilution of isopropanol do you use? And it's safe on paint and plastic should some drip.
@johnjeanb3 жыл бұрын
Question please: You seem to have mostly M track. You show how to make a detection zone by cutting rails with a Dremel-like tool. How do you do that on M track? (have you found a simple way to insulate rails from the metal bed?)
@marklinofsweden3 жыл бұрын
Hi! Best for M-track is to isolate center rail and connect a s88 DC. However.. If the tracks already glued or screwed down.. It’s not so easy.. Actually pretty hard..
@shailen80103 жыл бұрын
How do you implement sensors on M Track? You can’t isolate the rails like you can on K track
@larsmobawelt50524 жыл бұрын
He you , I'm looking for sandstone walls, have you a Tutorial ? wish you nice Days and stay healthy
@jimcruse56244 жыл бұрын
Can you how I can make ho power pole insulaters
@timoblok78683 жыл бұрын
Can you also do this with the multimaus from fleischmann?
@timoblok78683 жыл бұрын
With the router
@loucosmotivaferromodelismo65604 жыл бұрын
Legal gostei
@HHExpress4 жыл бұрын
Very interesting. But what about DC Analog trains. On my track which I'm building I do not use DCC. Would be interesting to see if there are Control software for Analog trains
@tomsmit22514 жыл бұрын
Yes there is, it is called Dinamo
@DCCtrainautomation4 жыл бұрын
Yes as someone else has mention VPEB make a system called Dinamo. I run and sell this and it’s great.
@HHExpress4 жыл бұрын
@@tomsmit2251 thank you I will look out for it
@HHExpress4 жыл бұрын
@@DCCtrainautomation thank you I will check it out
@tomsmit22514 жыл бұрын
Forgot to mention that Rocrail supports Dinamo also@@HHExpress
@msmodelbouw93374 жыл бұрын
7:18 Where have you bought those white-blue colored train??
@marklinofsweden4 жыл бұрын
Hi! It’s actually ocean blue and beige colored trains. They are available from the shops manuf by Märklin and a number of different brands. The prototype is German DB 70s - 80s
@msmodelbouw93374 жыл бұрын
@@marklinofsweden Thank you
@model_building_fan77084 жыл бұрын
Can it also work with mobile station 2?
@tomsmit22514 жыл бұрын
Yes
@DB--lv6tt4 жыл бұрын
rocrail 4fr!
@marklinofsweden4 жыл бұрын
Yepp!
@LehighNewEnglandRailfan4 жыл бұрын
you look and sound familiar, your from Model Railroad Academy right?
@TheWerdOfRa3 жыл бұрын
Hi, the URL in the video bio for Rocrail does not seem to connect to the right website. The current URL seems to be: wiki.rocrail.net/doku.php If you click through the one in the bio there is an untrusted certificate (self-signed) warning, but the one I mentioned (with the "wiki.") does not have this issue. I hope this was helpful.
@GegrildeKaasSouffle3 жыл бұрын
8:00 this is my end
@DuncSargentsKarstValleyRR4 жыл бұрын
I had to watch that a few times. I'm checking out Rocrail now. The link you gave warned me it's not secure. But I went there and it's fine: wiki.rocrail.net/ Thanks! --dunc
@svm.a.65634 жыл бұрын
hola. podías poner los subtitulo en castellano. gracias.
@HectorBarth4 жыл бұрын
Siiii, ¡Subtitulado en castellano, please!
@HumancityJunction4 жыл бұрын
How does Rocrail compare to JMRI?
@tomsmit22514 жыл бұрын
Rocrail is more versatile
@SpaceDave-on8uv4 жыл бұрын
I need a tutorial on how to get my father to not like trains anymore because he tells ME what I HAVE to build and what not to, although I pay for everything (he even bought a train with my money) he makes railroading not very fun (I'm 16)
@saidbakr4 жыл бұрын
There is an issue with SSL certificate of rocrail.net website.
@JER0EN4 жыл бұрын
Try wiki.rocrail.net instead.
@strobelightaudio4 жыл бұрын
use rocrail.net then
@HoboHeaven4 жыл бұрын
I tried Rocrail and say NO. Much to complicated. Easier way is Traincontroller , Number 1.
@DB--lv6tt4 жыл бұрын
Rocrail is not more complicated that the problems that it's solves... Maybe you should try to collect stamps!?
@marklinofsweden4 жыл бұрын
Hi! RocRail has improved a lot in terms of user friendliness over the passed years. When I started out using it in 2001 it was a mess. Very programmer-close-thinking and almost only German documentation. Today it has great wizards and other built-in auto-functions, which helps you up and running much faster than before. The english documentation is also as comprehensive as the German.
@DB--lv6tt4 жыл бұрын
@@marklinofsweden The best thing at rocrail it's not only open source, but also open minded. You can realize everything, no matter which scale, no matter which System. For example the turnouts. You can implement feedback or not, polarized frogs, motors or magnets and you can choose between nearly all available digital systems. Of course there are a lot of options, but that's the price you've got to pay for this freedom!