How to INSTALL LED Bed Rail Lighting on Your Truck - DIY

No video

How to INSTALL LED Bed Rail Lighting on Your Truck - DIY - DODGE RAM

Рет қаралды 203,933

Күн бұрын

In this video we review how to install LED bed lighting on your truck! This is a step by step do it yourself video for those that want to tackle it on their own and shows what is involved.
*** CLICK HERE FOR THE SAME LED LIGHTS ***
amzn.to/2E6e1an
*Check out the bulbs we found work best on these trucks HERE* 💪😎
9006 LED BULBS used for the fogs
amzn.to/3PXYaQB
INNOVITED 55w HID KIT for the low beams
amzn.to/454L20l
HIKARI CANBUS DECODERS for the low beams
amzn.to/2Eb2JBQ
LICENSE PLATE LED CANBUS
amzn.to/3PBYUJt
With some patience and some simple planning you can wire and rig up your truck to have led lights in the bed fairly easy and turn on like stock from the remote or from the factory switch on the dashboard.
Link to Mopar instructions seen in this video:
bit.ly/2IGdE65
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.

Пікірлер: 244

@BoostedMotorsports 5 жыл бұрын

**** CLICK HERE FOR THE SAME LED LIGHTS **** amzn.to/2E6e1an **Check out the bulbs we found work best on these trucks HERE** 💪😎 9006 LED BULBS used for the fogs amzn.to/3PXYaQB INNOVITED 55w HID KIT for the low beams amzn.to/454L20l HIKARI CANBUS DECODERS for the low beams amzn.to/2Eb2JBQ LICENSE PLATE LED CANBUS amzn.to/3PBYUJt

@foofstarr4856 3 жыл бұрын

Thanks for the video. It is worth mentioning to many people who decide they want to change out the cargo lights to LED, it will or might cause interference with your key fob to act up especially when the cargo light is triggered. I purchased the same ones he mentioned and although they are nice and bright, my key fob was acting up. Doing a little research online on the 5th gen Ram forums it seems many of the folks who also purchased cheap LEDs off Amazon for the cargo lights have the same issues with the key fob, especially when you hit unlock and the cargo lights turn on. When they go back off the key fob works fine. Having said that, most suggest getting better quality LEDs for the cargo such as Diode Dynamics (made in USA if you google them) or some other brand. Just thought I would come back to this video to let you Ram folks know having gone through the trouble of finding out the hard way. Either way, i will still pursue the LED swap to get rid of the nasty halogens and will also attempt to tap into this for the LED strip light project for the truck bed. Definitely a project now. Also worth noting that for my 2021 Laramie the cable routing seems a bit different than the dude in the video, not sure what year his truck is but the good thing is, it's still that same white wire with the tan on it. Good luck folks!

@matthewharr6372 6 жыл бұрын

this video saved me so much headache. that white with a tan tracer information was gold. thank you.

@BoostedMotorsports 6 жыл бұрын

Thanks for the feedback Matt! Let me know what you think of some of the other videos on the channel too when you get a chance 😎

@GhostedOffroad 6 жыл бұрын

Not gonna lie, i've been binge watching your channel because the production/camera work/ editing is on point and Of course I'm interested in the Ram 1500. Thanks for the vids!

@BoostedMotorsports 6 жыл бұрын

Thanks Felix I appreciate it brother. Doing my best to bring quality videos for the RAM community! Plenty more videos on the way! 👍

@jamesmiller5455 8 ай бұрын

Awesome video man! I am about to do the same and was curious how to tap into that button thankyou so much

@Cmlumley123 6 жыл бұрын

If you use an electrolytic compound on your solder joint before you install the shrink tube, it will ensure that no water can get into your joints under the shrink tubing. Nice install, looks good.

@BoostedMotorsports 6 жыл бұрын

Good tip! 👍

@mytubebobbie06h 6 жыл бұрын

Great job bro! I like the end result. I’m doing upgrades and simple mods to my truck. Thanks for the inspiration.

@BoostedMotorsports 6 жыл бұрын

Thanks brother! Let us know if you end up doing this mod and how you like it! 👍

@paulvilca 4 жыл бұрын

Niceee install I thought it was going to be too flashy but it’s actually classy. Like some nice under cabinet lights.

@matheusmatos6869 4 жыл бұрын

The best channel for truck owners 👏🏻👏🏻👏🏻

@BoostedMotorsports 4 жыл бұрын

Thanks brother I appreciate it! 🤟

@gbarrera001 6 жыл бұрын

Just finished up mine. Ended up tapping into power from the trailer plug and used a plunger switch under the bed cap so the light comes on when the cap is up. Super bright now!

@BoostedMotorsports 6 жыл бұрын

Thats awesome! Definitely a good way to get it done too! 👍

@hatsoffgames 5 жыл бұрын

Does this only work when the key is in the ignition, switched to ACC? Thanks.

@Fueler 6 ай бұрын

Yes and a lot easier

@bryantlee1592 Жыл бұрын

Thank you good information will hang on

@ck702 6 жыл бұрын

Love this video - thank you for showing the detail of the install! I now feel motivated (and confident) enough to go ahead and finally order a kit to do this on my '14 RAM. Maybe over the upcoming holiday weekend 👍

@BoostedMotorsports 6 жыл бұрын

Thats awesome Conrad! Let us know how you like it when your finished! 🤘

@iNgo-0 4 жыл бұрын

This is great. Did it on my 2014 and works great. thanks. I do need to get the LED for the cargo cab light since there isn't enough amp to run the led and the regular 921 bulbs.

@lanchile007 2 жыл бұрын

I like the way is hiding the lights from eyes, I did the same way mine and it does only illuminate the cargo area not the eyes ( Good job there), but I would run it from battery with fuse of course (home run) and with dedicated switch on the bed that way I wouldn’t need to go to the inside cabin to turn on/off lights on bed. Also I would be able to turn those lights whenever I want without having to turn on the other lights or the truck ignition key on. Just my opinion.

@hardroad8236 6 жыл бұрын

man that look's bad ass bro nice job on the install to. love the videos man you are really knowledgeable about all the upgrades you have have done on your truck. nice and clean factory look to if you were to have that done at a shop you would have paid out of the ass for the labor plus you have the peace of mind that it was done right. ordering the same led's for my truck and doing the install this weekend . thanks again

@BoostedMotorsports 6 жыл бұрын

Thanks brother I appreciate it! I agree a lot of these mods would be expensive to have done by a shop. I'm happy to share my build and projects with you guys though and hopefully encourages some people to tackle it themselves. I wish I had of documented all my past vehicle builds on KZfaq cause all of this is nothing compared to some of my old project but oh well have to start somewhere! Plenty more videos on the way! 👍

@wildmanjeff42 2 жыл бұрын

Thanks for the video, I have LEDlights on my RAM, but they leave a little to be desired, will probably add this to my truck !

@RSLWoodworking 4 жыл бұрын

Thank you so much for these Ram videos. Just did this job on my 2017 Ram this weekend! It turned out awesome.

@tpsjy Жыл бұрын

Great video man I appreciate you taking the time explaining thoroughly.

@Tubemint455 5 жыл бұрын

Great video. Was thinking of putting led lights on also but gonna hold off till the spring time too cold up here and I don’t have a warehouse like you lol!

@BoostedMotorsports 5 жыл бұрын

Thanks for the feedback I really do appreciate it! 👍

@asv4k8 2 жыл бұрын

I did this mod, so handy

@craigcaggiano431 3 жыл бұрын

Very cool video of how to tie in LED lights to pickup bed light source fir power

@pedrochavez2372 6 жыл бұрын

Looks great I’m definitely doing that in mine too! You should install the Deezee tailgate assist

@BoostedMotorsports 6 жыл бұрын

Yeah I saw some cheap $18 one I want to test for fun lol

@robthewaywardwoodworker9956 Жыл бұрын

Exactly what I was looking for.

@terrylindsey3294 6 жыл бұрын

Thanks for this awesome video. Your recommendation for the power tap worked for me on my 2014 Limited. Thank you Keep up the good videos.

@BoostedMotorsports 6 жыл бұрын

Thanks Terry! Glad you found this video helpful! Let me know what you think of the other videos for our trucks on this channel too! 😁

@zonnblacksmith2058 3 жыл бұрын

Very clean undercarriage. Very inspiring video deserving a hit in the subscribe button.

@edderhernandez8982 3 жыл бұрын

Great job going the extra mile with the front wiring.

@Roaming1Buffalo 4 жыл бұрын

Any chance you can put the link to those Mopar instructions? Thanks man!1

@craigshepard4709 5 жыл бұрын

I installed my led kit the same way man looks great but I would like to be able to use the on and off button that came with the kit too did you ever hook yours up

@dudediva69 5 жыл бұрын

wow ... what a amazing install ... great JOB!

@BoostedMotorsports 5 жыл бұрын

Thanks for the feedback I appreciate it! Let me know what you think of the other DIY vids on this channel too! 👍

@dudediva69 5 жыл бұрын

so i been watching your video off the blue ray player on tv... there awesome ... most over my head ... but i am learning something .... i just purchased a dodge ram 1500 tradesman ...2015 ... i really do like it. thanks for sharing all your knowledge..

@JK-wf6wr 6 жыл бұрын

Looks nice and clean just like the rest of the mods you’ve done. Keep the content comming man. That pro charger is going to be bad ass !

@BoostedMotorsports 6 жыл бұрын

Thanks Jeff I appreciate it! Plenty more content on the way and should be a fun build on the channel! 😁

@T0mmyGun654 6 жыл бұрын

Thanks for the great video. Like the beds lights. Now I need to do it myself.

@BoostedMotorsports 6 жыл бұрын

Thanks brother you'll love it once you get them on! 👍

@CatchMyDrift11 6 жыл бұрын

Well, you sold me these lights for sure. Awesome mod. Great video.

@BoostedMotorsports 6 жыл бұрын

Thanks brother! It's a pretty easy install but just a bit labor intensive. You'll love them once you get them on though! 👍

@joleitch82 6 жыл бұрын

Nice clean install and very well detailed step by step process and informing what tools, materials needed for installation. Definitely love the look and well placed. Wish I was wire savy enough to do something like that but I'm not 🤣 think you can come over and do mine 😉🤣 Looking forward for the super charger install!

@BoostedMotorsports 6 жыл бұрын

It's super easy John! It's literally just a positive and negative wire! Follow this video and you'll get it done no doubt! I didn't leave any steps out strictly for this reason so people could do it themselves! 👍

@joleitch82 6 жыл бұрын

BoostedMotorsports Thanks for looking out, I might go ahead and give it a try. Right now I'm waiting for my carven 5in tips to come in this Friday and I'll also be ordering some new brake light sets and there going to be smoked lens color. But I'm really stoked about seeing your charger install hopefully I'll be able to afford one some day as well lol. Btw, I wanted to get your opinion, I was thinking about painting my chrome bumper and wheel skirts black chrome colored since my truck is gargoyle colored thought it look cool having black chrome mixed with the truck color. Let me know what you think 😁

@BoostedMotorsports 6 жыл бұрын

Yeah definitely! I'm not a huge fan of the massive chrome bumpers. I had them on my 2009 SLT and wasn't a fan. Painting chrome is a bit tricky cause its hard to get paint to not chip or peel without doing a lot of prep work. I would look into getting them wrapped with vinyl or even plasti-dip so that you can remove it if you ever change your mind or sell your truck 👍

@josephlynn85 6 жыл бұрын

i need to know more about how you have a sweet personal warehouse haha

@BoostedMotorsports 6 жыл бұрын

😆

@adamjones687 5 жыл бұрын

I think the exact same thing every time I watch a video that's not at his house hahaha

@iNgo-0 4 жыл бұрын

Cool videos. Have a 2014 5.7 big horn crew cab. Need to do this mod on it. Thanks.

@chimku 3 жыл бұрын

i would utilize the switch mount it on the side ez access

@armandotoscano4284 6 жыл бұрын

clean !! I just received mine and doing step by step ! 👍👍

@BoostedMotorsports 6 жыл бұрын

Thats awesome! Let me know how you like them! 👌

@rsdaarud 2 жыл бұрын

Nice job!

@902_4life 3 жыл бұрын

great video bud..just did this to my 2015 ram shorty.. looks awesome!!

@carolvanarnam529 3 жыл бұрын

Did it mess up your computer and does it show a burnt out bulb code?

@gr8_22-15 6 жыл бұрын

Great video. Looking forward to seeing which cover you get. I just picked up a ram night edition red. Getting a roll up of some kind.

@BoostedMotorsports 6 жыл бұрын

Yeah I want some sort of hard cover so that I can keep stuff locked back there with my locking tail gate 😁

@TheJrrk 6 жыл бұрын

Looks good John!

@BoostedMotorsports 6 жыл бұрын

Thanks Jason! I was pretty happy with the results and was a pretty cheap mod to do! 👍

@TheJrrk 6 жыл бұрын

BoostedMotorsports I've always wanted to do that but kinda cautious to start messing with the wiring knowing what the warranty people are like here up in Canada

@ck702 6 жыл бұрын

Thank you again for the detail in this video. I ordered the same kit and installed it over Memorial Day weekend. It looks fantastic! Was great in your video, but it is even better in person. One of the best mods I've ever done in any of my vehicles for sure. Instead of wiring mine to the cargo light, I ran it to a add-a-fuse in the fusebox, and then mounted the button switch near the tailgate with some 3M tape. Current for lights: Bed lights installed. Reverse lights, cargo lights, 3rd brake light, and fogs all replaced with LED. Headlights replaced with Innovited HID kit and CANBUS harness. Next up: High beam LEDs (need to do some Dremel work to get those to fit since they all have heat sink - have you considered it?), and going to mount a 42" 240W light bar on the front bumper. We go to Utah often, and at night there are deer and elk everywhere on those mountain roads and trails.

@BoostedMotorsports 6 жыл бұрын

Thats AWESOME Conrad!!! Glad you are finding the videos helpful and putting them to good use! I try to keep them as honest as possible and never trying to sell or push anything just providing no BS content that people can use to see how some of these mods turn out! Plenty more on the way 😁

@willyscreation 6 жыл бұрын

They look great! To bad I don’t have to do this to my Rebel because it comes with LED’s in the bed already but I would totally do this.

@BoostedMotorsports 6 жыл бұрын

Yeah you're lucky! These are definitely brighter than any factory LED. I almost bought the factory kit for mine but went this route 😁

@davenasp7363 6 жыл бұрын

Great video! Super bright and clean. Great work💪

@BoostedMotorsports 6 жыл бұрын

Thanks Dave I appreciate it! 👍

@davidrosales6893 6 жыл бұрын

awesome! Definitely doing it on my truck

@BoostedMotorsports 6 жыл бұрын

You will love it David! 👍

@davidrosales6893 6 жыл бұрын

BoostedMotorsports I finally did it and it didn't work

@ivanl1154 4 жыл бұрын

I just happened to buy this same led kit. Excellent tutorial!!

@ttss5726 3 жыл бұрын

What I do find entertaining is the folks commenting on the warehouse lol.... while he has to go some where for that creature comfort I just walk outside to the 100x 150 pole barn out back which has tv Internet heat air and best of all a bedroom in case me and the dogs have to sleep in the dog house. Hell we prefer to stat there even when not in trouble

@blairmclaughlin7225 6 жыл бұрын

I would like to thank you. I have completed a lot of the same upgrades on my 2014 Dodge Ram and your videos have helped out so much due to your attention to detail. Please keep them coming. Cheers buddy

@BoostedMotorsports 6 жыл бұрын

Thanks for your support Blair! Plenty more videos on the way! 👍

@ingi503 6 жыл бұрын

That looks GREAT! Awesome work, John!

@BoostedMotorsports 6 жыл бұрын

Thanks man more videos on the way! 👍

@Nate6133 Жыл бұрын

Technically a fuse will work anywhere is the circuit, fyi. As long as it’s before the load then whatever you are powering is safe in the event of a short.

@joshfoster7760 5 жыл бұрын

So glad I have bed lights already good video enjoy watching them

@TinkerPrepper 4 жыл бұрын

This is an excellent how to video. Thanx for sharing

@matthiebra 3 жыл бұрын

Kinda confused on the fuse, you do the wire tap and the fuse connects to wire tap then to battery or to the back? And you just ground the led strips to the chassis and connect the positive to the fuse or wiretap?

@FranciscoSanchez-jd3ws 4 жыл бұрын

Where does the other side of the fuse go connected to after connecting to the white/tan wire on the bottom

@marcom7397 3 жыл бұрын

Same thing I was wondering

@larrywinchester8117 3 жыл бұрын

The way they shipped it, it was a ground to the chassis but since he moved the fuse to the front of the truck, he used the chassis ground at the rear by the taillight. Hope this helped

@BoostedMotorsports 3 жыл бұрын

Yup

@joshhuoabski3278 5 жыл бұрын

was browsing through your links and have a comment that may save some people a lot of money. Due to my profession i repaired it fairly cheap but.......INNOVITED HID KITS use great ballasts and bulbs seemed good also, HOWEVER DO NOT USE ANYTHING ELSE for adding HIDs to the loaded rams with the CANBUS systems. ESPECIALLY do no use INNOVITED CANBUS system. the standard kit will leave you with a uneraseable bulb out on your EVIC display. The CANBUS version will infact FRY your exterior BCM #2. *I used their relay kit and capacitor/cancelers the first time, then kept the harness and replaced with CANBUS resulting in module fairlure. However if you buy ONLY the INNOVITED HID KIT and buy a MORIMOTO STANDALONE CANBUS ADAPTER ($25) all you have to due is plug it inline with you factory headlight connector and that is it BY FAR the most simple and fully functioning HID kit for Projector low beams on my2013 RAM 1500 SPORT 5.7L with ( Turn signals illuminate )not the headlights for running lights. Did not have good luck with morimoto ballasts. so grab the BEST OF BOTH WORLDS. HIDs made stupid simple! Thanks for the video and saving me time for chasing that wire!...my track is full up with AUDIO power and LC2i Power wiring.

@underradar9858 6 жыл бұрын

Awesome upgrades John! Your truck prob looks like a landing strip when pilots look down at night lol

@BoostedMotorsports 6 жыл бұрын

Haha you actually can't see the light strips unless you are 4feet tall. They hide nicely under the bed rails so its a pretty clean look! 👌😁

@underradar9858 6 жыл бұрын

BoostedMotorsports I just meant how much brightness your truck gives out with interior, cargo light and headlights and fogs lol looks great tho.

@BoostedMotorsports 6 жыл бұрын

Yeah its pretty damn bright for sure lmao!

@TheSadler333 6 жыл бұрын

You do an amazing job!

@BoostedMotorsports 6 жыл бұрын

Thanks brother I appreciate it! 👍

@Johnbrum26 6 жыл бұрын

Nice, i have the factory ones that are near the tailgate. Wonder if i could tap those in for extra light

@txgaspimp9321 6 жыл бұрын

Hey bud i am gonna post a pic for you where my truck pic was of what i done to my wifes truck

@BoostedMotorsports 6 жыл бұрын

Johnbrum26 yeah half the work is done for you on your truck John! Should be able to do that no problem. Worst case scenario you may have to run a relay if the computer shuts down the circuit from too much load but you won't have to mess with any of the wiring inside like I did 👍

@donniejackson6045 Ай бұрын

Do you still have access to the installation instruction? Also, did you have any trouble with your key fob after this installation? Just curious, I swapped the halo cargo light with a LED bulb and had some serious trouble with key fob. If you could help it sure would be appreciated.

@marcom7397 3 жыл бұрын

Question 🙋🏽‍♂️ you tapped into the white wire with tan tracer. Then connected one end of the fuse to the red wire from the (white/tan/red) tap. Where does the other end of the fuse go? It was just taped up under the dash. Bit confused on that part only

@CUnit1981 6 жыл бұрын

Awesome video thanks for posting!!

@BoostedMotorsports 6 жыл бұрын

Thanks brother! More on the way! 👍

@cadeblain2265 Ай бұрын

Do you know the part number for the oem mopar led light kit ? I can’t find it anywhere only for 19 and up

@charlesmurray3067 6 ай бұрын

I have running board lights that I want to put on my truck, can I use the same method with those lights?

@timothyedmiston8756 5 жыл бұрын

Dude that was cool, great install well hidden and seems to work well

@mrgoodbar672001 2 жыл бұрын

Some help needed here. I wire tapped to the white/tan cable in the loom under the carpet and got nothing. I tried to the #13 pin (yellow wire) in the green connecter and the power appears to be constant. I can’t find the switched power for the cargo light. Any help?

@robinkuruda5249 6 жыл бұрын

Always enjoy videos

@BoostedMotorsports 6 жыл бұрын

Thanks for the support! Plenty of content on the way so stay tuned! 😎

@GarryFullerSr 6 жыл бұрын

That looks Great.

@BoostedMotorsports 6 жыл бұрын

Thanks Garry! 👍

@jackazulay5637 6 жыл бұрын

Looks really good my man!

@BoostedMotorsports 6 жыл бұрын

Thanks Jack! More videos on the way! 👍

@johnruble3454 Жыл бұрын

have you done this with a dodge dakota yet? im buying nilight led kit for my bed and going to install it in my dakota. could you make a video with your dakota you have doing this?

@zeus_ca577 6 жыл бұрын

Great upgrade!!!

@BoostedMotorsports 6 жыл бұрын

Thanks brother! I'm liking how it turned out! 😎

@jasonworkman7912 3 жыл бұрын

Just out of curiosity, the wiring process could be used with putting led light strips in the cab, right? I want to do so they come on when I open the doors and unlock the truck.

@tomhuber2868 6 жыл бұрын

As usual excellent video, thanks again!

@BoostedMotorsports 6 жыл бұрын

Thanks Tom! 👍

@alexandrebaccus9471 2 жыл бұрын

Hello, Thanks for this video! I followed your tutorial to install a led strip in the bucket of my 2014 RAM 1500. Problem: when I press the switch, the lights (the original one at the third brake light and the led strip) s 'come on for one second then go off even if the indicator light on the instrument panel remains on. Can you tell me how to solve this problem? In advance, thank you for your answer!

@frankmmiii 6 жыл бұрын

Very nice. I have a 2015 Ram Crew Cab Tradesman with the Hemi 5.7 liter no bells and whistles, cloth interior. Watching your videos has been eye opening so far. I'm looking to upgrade my Ram starting with 24" SRT chrome wheels. I've already installed a K&N filter which has improved the already muscular stock sound. I'm watching so keep them videos coming, Great Job!

@BoostedMotorsports 6 жыл бұрын

Thanks Frank I appreciate your support! I'm glad you're enjoying the videos and it's comments like these that keep me motivated to keep going! Plenty more videos on the way sir! 👍

@Chief305 6 жыл бұрын

Do an electric cutout, it'll make your ram exhaust notes richer, deep, and throaty.

@_wardavewoodworks 6 жыл бұрын

If you haven’t gotten a bed cover yet, check out Pace Edwards, supper low profile, very happy with mine.

@BoostedMotorsports 6 жыл бұрын

Thanks brother I'll take a look! 👌

@danimalmac77 3 жыл бұрын

Nicely done!

@BBBILLY86 6 жыл бұрын

Great Vid!!!

@BoostedMotorsports 6 жыл бұрын

Thanks Bill I appreciate it! More videos on the way! 👍

@donniejackson6045 Ай бұрын

What year is the Ram you did this to?

@f296877 4 жыл бұрын

Great video thanks 👍

@JoshSmith-nw2fx 5 жыл бұрын

I have a 2011 Ram and am interested in getting these...can I ask though why you didn’t just run it to the cargo lamp button. This may be a dumb question but I am a noob in wiring.

@tylerhoss5379 3 жыл бұрын

Where did you find which wire to tap in to. I have a new ram 2500 and I was curious if it was the same wire

@rurydominguez 2 жыл бұрын

Whered you get those tiressss 🔥🔥🔥

@johnmcdougald1238 6 жыл бұрын

Did you poke through the parking brake grommet do you have the wire running through the same hole as the brake cable? A can foresee an issue with wire chafing and a short unless you were able to also get the wire loom through the hole also. Aside from that, good install video. I plan on doing something similar to my 08 MegaCab

@BoostedMotorsports 6 жыл бұрын

You'll love them on your truck John! 👍

@monkeydoublebackflips240 4 жыл бұрын

How good is the longevity of these led bed lights; also are these led bed lights compatible with a bed carpet ? Thanks in advance

@seanquillin3078 6 жыл бұрын

Hey! Another great video, bought a similar set and will be installing soon. I’m wondering how well they’ve held up since your install.

@BoostedMotorsports 6 жыл бұрын

Thanks Sean! Mine are still holding up great no issues and no CANBUS issues with tapping into that circuit either!

@seanquillin3078 6 жыл бұрын

BoostedMotorsports excellent! Thanks for the info and the vids!

@gamerxdrg2154 6 жыл бұрын

Hmm 🤔 i might get this for my dads 2005 Dodge Ram 5.7 hemi

@BoostedMotorsports 6 жыл бұрын

They are pretty cheap and work awesome! 👍

@moisesespino2021 6 жыл бұрын

lol funny disclamer..... great vid man!!!!

@BoostedMotorsports 6 жыл бұрын

Thanks! 😁

@gregorybice8117 6 жыл бұрын

Great video. I'm a little confused on where you spliced in your power wire with the fuse though

@BoostedMotorsports 6 жыл бұрын

Its just a wire tap placed on the wire mentioned in the video in the door sill. I put the fuse up behind that panel for easy access before running the power back to the rear of the vehicle.

@gregorybice8117 6 жыл бұрын

BoostedMotorsports right on bro. Keep the vids coming. You're doing a great job helping out us DIYers out here

@FL00DY126 6 жыл бұрын

Just a quick question 8:40 into your video you show the plastic step sill removed.. how does that come off ? I need to get at the rubber seal notice some rust starting to show ?

@BoostedMotorsports 6 жыл бұрын

Hey brother it just pops up with the speed clips. Just grab it with your fingers and pull straight up 👍

@9999825354l 2 жыл бұрын

Hello what k would you recommend? 6000k or 4300k?

@abrahmcrosbie3781 5 жыл бұрын

Good video

@BoostedMotorsports 5 жыл бұрын

Thanks Abrahm!!

@UsNCollord216 6 жыл бұрын

Hey man great videos! What are you thoughtson the MDS? Delete it? Tuned it off? Any thoughts or research?

@BoostedMotorsports 6 жыл бұрын

Thanks brother I appreciate it. I personally don't mind it and just leave mine on. It sounds funny at times but I don't mind saving some gas at the pump if it means I get to spend more on modding the truck! It's really a personal preference on whether it bothers you or not. On the 8speeds you can just click it down into manual shift mode when you jump in the truck and it won't turn on. 👍

@sandman7167 6 жыл бұрын

For the fuse install, do you just cut above and below and attach the red wire you cut?

@BoostedMotorsports 6 жыл бұрын

Yes sir! I just snipped it off the harness located at the back of the truck and moved it to the front of the circuit before sending the power to the back of the truck.

@andresmaestas710 3 жыл бұрын

Thank you so much for the video! I’m having a problem with the circuit. When I push the cargo light button the lights flash but than shut off. Both the cargo light and the bed leds flash than shut off. I tried this with the the halogens than bought leds and I’m still having the same problem. I disconnected the new wiring splice but my cargo light still flash than shut off. Can you please help.

@starmc26 3 жыл бұрын

Is your ram 5th gen?.. (2019+)... If so, make sure you don't replace the third brake light bulb with LED. Also, you probably have too much of a load on that circuit.

@olivernelson9302 3 жыл бұрын

So I installed led lights for.my running boards, so I can I see better where I'm stepping at night.. I tapped into the white/tan wire from the cargo lights, but they don't come on and now the cargo light doesn't either. ?? Any thoughts on what's going on? I unhooked and reconnect the battery. The cargo light came back on. But as soon as I unlocked the door with remote the led flash on and they were both out again. ??

@starmc26 3 жыл бұрын

You are pulling too much power off that circuit. You need to use the white/tan wire as a trigger, connected to a relay, which switches power straight from the battery, or a beefier source. I installed ground lights under my running boards as well. I used the lights under the driver side footwell as the trigger-to a diode-to a relay w/capacitor.

@ChrisKelly27 4 жыл бұрын

I have a question, the cargo light you tied into for power has an auto shut off(if i'm correct) even if you activate it with your key fob it will shut off after a min or so. If you want full control of the lights in the bed you would have to find a 12v source that's always on correct? I do construction and I want to be able to leave these lights on for awhile so i can find tools or load my truck in the dark.

@foofstarr4856 3 жыл бұрын

Then just go directly to the battery instead and make a switch button in the trunk