Bosch GWS 9-115S has had a hard and short life.
Рет қаралды 3,622
Жыл бұрынThis grinder wouldn't be the best model for grinding but if say it's failed due to improperly fitted brushes.
These are also the wrong brushes, that where to long. meaning the rear cover was catching on the spring and causing them to have to much pressure on the armature.
#bosch #boschgrinder #boschtools #tools #powertools #grinder #gws9115s #toolrepair #burntout #motorburnt #broken #deandohertygreaser
@onlyme7939 Жыл бұрын
Without doubt, my favourite KZfaq channel, keep it up Dean👏👏
@nelchan2421 Жыл бұрын
bestman
@efektmurowany Жыл бұрын
Dean, you will work it out 😅😅
@riba2233 Жыл бұрын
ouch, that commutator looks rough...
@stauker.1960 Жыл бұрын
Wait, Makita screw? You know which screws are which by sight? How?
@wrenchesandadventures Жыл бұрын
Makita is using Philips screws for the most part i think, while the others are using torx
@deandohertygreaser Жыл бұрын
Each brand uses diffent screws. W Even if they are The same head, the shape and profile are different. Makita use JIS heads, like a Philips but straight cut and a shorter head tapper. Hikoki or hitachi use a Philips but the head is more like a waffer or flange head. Most other brands use some type of Torq or security Torq head.
@stauker.1960 Жыл бұрын
@@deandohertygreaser and you've memorized the differences, from the sounds of it
@doctorlefthandthread Жыл бұрын
That Bosch is what I call suboptimal
ТВ3 - сериалы и шоу
Рет қаралды 2,2 МЛН
Dean Doherty
Рет қаралды 48 М.
Dean Doherty
Рет қаралды 23 М.
Dean Doherty
Рет қаралды 1,4 М.
ТВ3 - сериалы и шоу
Рет қаралды 2,2 МЛН