thank you...i have done another one of this will pod=sted it soon

thanks alot bro!

thanks boss

glad to give you an idea. please do me a favor hit subscribe. thank you very much!

Probably bad caps on the crossover. I can’t think of what else could go wrong.

if you are located in philipines you can send it to me to replace the box and restore the original look. message me at my facebook page

@@nikunospeakerboxmaker6614 Thanks for your reply. I am not located in Phil. But could you plz suggest the type of foam used, it’s location within the woofer and what Type of wood glue should I use to secure the front panel.Thanks in advance

i saw on hexibase's channel that with 6th order the frequency response in characterized with a prominent plateau with a dips on both ends of the operating band: that extra woofer works as a 4th order and the whole unit creates a "6th order series offset hybrid bass reflex" extending the performance well into the midrange.

What bose speaker is that? I never seen 3 woofer

mdf board i use.... you have to follow the exact dimension otherwise the sound will be different from original box

thanks mate!

dasma cavite sir punta ka lang sa fb page ko pm mo ako for inquiry na sa channel ko ang link sa right corner ng banner. tnx!

Hola sabes las medidas gracias

.75mm

@@nikunospeakerboxmaker6614 I am sorry but it is not 0.75mm. MDF is not available in this size. Please tell me if it is 11mm or 17mm or 25mm ?

@@theumeshkumar09 .75 mm MDF is the same as ¾ inch MDF (here in America). It's THE most common thickness of MDF....so THAT size isn't available where you live?

only 1 sir

yes, because the original box is made of particle boards

just an ordinary wood glue called STIKWELL

Saan address nyo sa Pinas

its the same size as the original box you can find the exact measurement of bose acustimas via google serch

@@nikunospeakerboxmaker6614 Thanks for your prompt answer. Google search only gives the outer LxBxH but to be able to copy the box , we need internal measurements of distances and tube measurements. Next time please note down the measurements.

its your choice mate we cant blame those person who owned those kind of system they like it!

You probably don’t have one of these Acoustimass units. Probably never had one, at least with the cube speakers. You are probably thinking about bass with this speaker. This is not a woofer. This in conjunction with the cube speakers that came with it makes a speaker system. In simplicity, if someone has the 2 channel setup, they will place one speaker on left, right, and the big one in a variety of places/positions. The visual observation would show 3 separate speakers. If setup pretty close to correct it would sound like there was 2 tower speakers. The cube speakers are taking care of the high, and mid high frequencies, and the Acoustimass, works the rest of the frequencies being played. So, instead of a bunch of big speakers all over the place. The lower frequencies are all in one location, while the cube speakers are the only ones that need to e spread out. Thus, this is not passive woofer, this is part of a speaker system.

@@nikunospeakerboxmaker6614 great video, keep them up.

@@johnsimun6533 Oh, okay! Thank you!

@@johnsimun6533 it’s a passive subwoofer where the crossover is set to higher frequencies? It still produces the low frequencies of the subwoofer but is harder on your receiver/amp.

dasma cavite sir pm mo lang ako sa fb page ko

Mgkano kaya aabutin. Pag paayos ng ganyan

thats what you called value of the junk lol!

Huy Le “One mans junk, is another mans treasure”!!!! @Huy Le Everything has a value but from your comment, I don’t think you will understand!!!!

You have to admit that he does a very skillful job and that it’s worth sharing the techniques on KZfaq. I think it would have been wise to recap the crossover though.

well we cant blame those owners they like it thats why they want it restored when the box is broken damage

pm mo ako sir sa facebook page ko