sweet!

its up for sale now!

how much did it cost you to build

Thanks!

Thanks!

Thanks! Yeah the leaning post makes it a lot better!

thanks man!

i dont mean to be so offtopic but does someone know a trick to get back into an instagram account?? I was dumb lost my login password. I would love any tips you can give me

@Rocky Judson instablaster ;)

@Rocco Jude thanks for your reply. I got to the site through google and im waiting for the hacking stuff now. Looks like it's gonna take quite some time so I will get back to you later with my results.

@Rocco Jude It did the trick and I actually got access to my account again. Im so happy! Thanks so much, you saved my account :D

Thanks!

Thank you.

The console is 36” I believe but slightly short. The balance is a guess almost because weight of driver will vary the balance anyways. Put the console in and go with what feels best to you.

awesome!

Around $3,600

It was around $12,000

Appreciate your comment and compliment, it was 24” wide which was ok sized on the 15’ it was difficult to walk around for a big guy.

I did it with a 13 whaler twice. Very similar set ups. I played around with the placement of the console by changing where and how I placed my fuel tank (under the seat, in the back, in the console) and also by using a jackplate that extended my motor out. Very very functional and fun. If you don’t mind putting in some elbow grease, ripping out and changing things, working with fiberglass, the end results are only limited by what you can imagine. The space is a little limited with a 13, that’s why I moved the console towards the front and extending the motor back, and keeping the fuel more aft allowed me to place the console more forward and still balance nicely. The console being more forward allows more space to move about. It got on plane quickly even with a 25hp with two people.

It’s custom fabricated.

the console is a urethane while the sides and bottom are two part gloss but sprayed which gives it a glossy but textured more durable finish

I think that’s just orange peel

I thought the console was HDPE;

They are not backed just pre drilled, filled with 3m 5200 lagged. They are just to hold fenders, would never use for mooring it. Imagine one could open a side underneath the rub rail then slide a plate under the gunwale and send a bolt through that and then seal back up and cover with rail. Good question

Honda 11 x 15

It’s a custom made 10 gallon inside the console

I am thinking about doing the same thing with a fuel tank. But I have had no real reference. My understanding was that the vent had to be outboard which gives me caution. Have you any knowledge of wether doing it the way you did it is considered safe other than your personal experience. Any reference or data that you know of. I am probably going to do it anyway. But after doing yacht restoration for over forty years. I actually don't have a answer to this

34 mph

Thanks I’m rebuilding one just like it soon finished

We decided not to use that console and instead got a custom fabricated one

@@fishorstarve6803 i think that console looks cool though and might want to use it

Creety _ we still have it if you want it. I believe we paid $600 and shipping is included.

There’s another video where we run it out on the lake so check that one out!

The boat sold for $17k

That is way too cheap where I'm from!