Fr💀

Damn beat me to it

400th like

WAHAHAHA WARIO !!

Bruh, hahaha

I too

Aa yes, the taste of burnt microplastics

Genial dog

Plastic bottle is just for fun 💀

😅😂

😂 RIGHT 🤣😂🤣

Just throw a piece of flavor gone chewing gum on top. 😂

You just need to melt another bit of plastic and make a cap. Obviously 🙄

After I thought it was a grata idea, I realized this ⬆️

+ more plastic waste

❤ ❤❤❤❤❤😂🎉😢😮😅

Not even close. You're either deaf or never actually listened to the song.

You mean Feel Good Inc, from the gorillaz or Feel Good the 1980s song?

Santa

@@Monkkiefeel good inc

Facts!! Lol, now they just have a forever open bottle of oil collecting dust particles.

@@FNDragon54 Just use a tissue

@killerspreet7318 but doing that defeats the purpose of making the hole in the first place. Doing that, you would have to make sure tissue doesn't fall off, so you would have to tie it down somehow. Which takes more time than just popping the cap to pour the oil that already comes with the product in the first place.

@@FNDragon54 Use a rubber band? It takes 5 secs bro. The point of this is to make easier to control how much liquid you pour without accidentally pouring a lot.

❤❤❤❤❤❤❤❤❤❤

Use plastic wrap or foil as a cap…ghetto products, ghetto solutions 🤷🏾‍♂️

100%

Few spilled drops.

It would look better on your face

How does that look like anything remotely what you’re thinking about? Corn replace the C with a P, really has ruined y’all’s brains fr.

@@user-gf9iy9yl2o bro said "replace the C with a P" like we're in fifth grade 💀

Gen z needs to get their minds outta the gutter

@@moosa1461 nah that's where the fun happens 😍😋

😂😂😂

Maybe because it's not the purpose you think it's intended for...

That's not the point. It's a much more narrow opening allowing a more precise and controlled use.

It doesn't have a lid so if it falls over it will be a disaster.

those oil bottle spil everywhere, the point of having this its because its easier and faster to pour a controlable amount

Bro probably alive ants will fall in tho

Ants are a good source of protein. Unless you're a vegan of course.

​​@@StevenMartinGuitarand then they will die. so they become dead ants by time you wake up. hope this helps 🤗

​@@his.worst.nightmareyeah but it's not dead ants that fall in

@@his.worst.nightmareso people make these thing called jokes

Microplastics are in your balls and in the rainwater... there is no escaping them anymore

​@@joemobile_ The microplastics are stored in the balls

Damn beat me to it

it will stop after that first pour

That’s in everything. Even you

And when you missed the lesson about oxidation, too.

Fr

You would usually wash a lid from an empty bottle and use that for crafts and only put it on when cooking. Other than that keep the original lid on the bottle intact.

In a kitchen squeeze bottles such as the one in the video are essential for oil. This is a standard food service practice.

But... But... This is why many bottles have a little shape on the bottleneck under the lid, so you can dose

Frfr

it will spill a little, bu tnot much because the hole is small (unless you leave it there to leak ofc)

Ants: "It's free real estate"

It's a pop top. It would most likely spill regardless if it was dropped.

I was about to say this lol. Now he needs a cap for his cap 😂

melted and re-solidified*

Microplasticzzz

it’s all burnt to be formed into what it is anyway, just wash and wipe, you’ll be alright

Really is oil hot to burn plastic once again

scrumdiddlyumptious

For real lmao. These comments are unreal lol

Dude is a clown

9 months later…

shieeeeeeeeet

Shit gonna be full of outside bacteria and other crap

We already drink it, LA tap water have a ton of it

Ayo the profile​@@AbigBlackMonkey

@@AbigBlackMonkey different quantity and it doesn't mean "hey we already ingest it so we should just add more". No sir. We should not.

Stolen lol

What if he freezes it in the freezer for a couple of hrs?

Its not for only your Kitchen at home hahaha… its a life hack for kitchen‘s in Restaurant‘s… hahahaha🤦‍♂️

@@GamerPlaceHD_YT or precisely for poor restaurant's kitchen 😂 There's actually a product like bottle pourer with stopper for cooking oil. And it also cheap priced.

​@@GamerPlaceHD_YTrestaurant doesn't use this shitty hacks .. it's a safety standard issue mm you gonna pour your oil through melted plastics? I've never worked in a kitchen they don't have a proper oil pouring container 😂😂😂

@@GamerPlaceHD_YTrestaurants that would be closed after a first inspection due to violations oil is constantly opened to air, dust and dirt and we will poor it through melted plastic with the risk of plastic peaces dropping in the food nice 👍

😂😂😂

The only type of Karen’s I can tolerate

the air you breathe will kill you a lot faster than (maybe) any plastic particles that could be released from either cooking with heated plastic or not. you know that micro plastics can be released even when plastic isn’t heated right? even when it’s cold it can release plastics?

Ur right but these typa comments are the same ppl who eat fast food every single day.

@@Sffker Why a scientist said, twenty years ago when asked, that the only kind of plastic she would eat, drink or cook from is glass or stainless steel.

@@SoundofSilence492 there isn’t even any solid concrete evidence of what long term exposure looks like. maybe in 100 years they’ll know better, but until then, it ain’t worth worrying about. humans are filling the environment with plastics, you should be more worried about that than if you poop out the micro plastics from food cooked in plastic or not.

suits him well for serving his customers microplastic 😂

He laughed like a pirate😂

900th like

i love me ก็โคตรเยี่ยมซะด้วยสิ😆

hahaha

There are much more things you can do to have wet fun.

​@@potassium3948what....

@@potassium3948 as kids?

Damn it man I'm trying not to be miserable about how life was much more LIFE back then than now stahpp😭😭😭

#freecongo. Let Congo be free.

That’s pathetic

Like wat? The plastic cools and is same as when packed at the start 🤦‍♂️

@@njjs447Application of heat to plastic can cause chemical reactions that are not reversed when it cools back down. This can result in the creation of volatile compounds, and can cause chemicals to leech from the plastics.

@@njjs447 Not how chemistry works genius.

This guy shouldn’t be a chef if this is the health and safety quality he holds himself to

My issue is now the oil remains exposed to outside always...

​@@senpaichiyochi9884a chef at an establishment is gonna go through that bottle in a couple hours, max. I bet both our oils in our pantry are older than that.

@@PuertoRicanRattlesnakeit’s a video

@@g1nk_it’s a food safety violation. you don’t know if melting that plastic causes it to have a poor interaction with the oil. a health inspector would give you a ding for it.

Crazy concept : That bottle was melted into its original shape… 😳🫢

You people idiots.

as if the heat wont just get rid of it...

There is already microplastics in everything we eat, all the water we drink.

So you don't buy any salami, mineral water, rice...etc. it's contains microplastic too. 😢

Yeah. They gotta quit making bottles out of plastic already.

How did they make the cap if they didn't melt the plastic first? All plastic that touches your food or drinks has at one point been melted to form the container, this isn't adding or subtracting anything to that bottle

@@professored7169wrong, some plastics are synthesized in the container or blown into shape while being synthesized, not every type of polymer is meltable in the first place

@@satanistruth666 Common types of plastic bottles for food include: 1. **Polyethylene Terephthalate (PET or PETE)**: Often used for water and soda bottles due to its strength, transparency, and resistance to permeation. 2. **High-Density Polyethylene (HDPE)**: Commonly used for milk jugs, juice bottles, and some food containers because of its sturdiness and resistance to chemicals. 3. **Low-Density Polyethylene (LDPE)**: Used for squeezable bottles (like honey and mustard) because of its flexibility. 4. **Polypropylene (PP)**: Often used for containers that hold hot liquids, such as yogurt containers and syrup bottles, because of its high melting point. 5. **Polystyrene (PS)**: Sometimes used for disposable food containers and cutlery, though less common for bottles. 6. **Polycarbonate (PC)**: Used in larger, reusable water bottles and some food containers due to its toughness and heat resistance. ### Common Manufacturing Process: Injection Blow Molding Injection blow molding is the most common method for producing plastic bottles, especially those made from PET and HDPE. The process involves several steps: 1. **Injection Molding**: - **Material Preparation**: Plastic pellets (resin) are fed into a heated barrel where they are melted and mixed. - **Injection**: The melted plastic is injected into a preform mold, forming a "preform" that resembles a test tube with a bottle neck. 2. **Blow Molding**: - **Heating**: The preform is then heated to a temperature suitable for blow molding. - **Blowing**: The heated preform is placed in a blow mold, and air is blown into it, causing the plastic to expand and take the shape of the mold cavity. 3. **Cooling and Ejection**: - The mold is cooled to set the shape of the bottle. - The bottle is ejected from the mold and trimmed of any excess plastic. ### Variations of Blow Molding There are a few variations of the blow molding process that are also used in plastic bottle manufacturing: - **Extrusion Blow Molding**: Used for larger bottles and containers, this process involves extruding a tube of molten plastic (parison) and then blowing it into the desired shape. - **Stretch Blow Molding**: Specifically used for PET bottles, this process involves stretching the preform vertically and horizontally during the blow molding stage, enhancing the strength and clarity of the final product. ### Summary While injection blow molding and its variations (extrusion blow molding and stretch blow molding) are the predominant methods for manufacturing plastic bottles, each type of plastic may have specific requirements and optimizations within these processes to achieve the desired properties and quality.

Jesus is king of kings and satan is the author of confusion and lies. He loses in the end and he knows the end. Of the book. This is why misery loves company and he is bringing you with him. With your stupid facts about plastic being synthesized in the bottle. What does that even mean it’s clear you’ve never worked with plastics.

its almost like all plastic is heated up and injection molded into forms so reheating it and reforming it wont be a problem.

​@@reubeng2110no, it's still a problem. that's why plastic itself is a damn problem. plastic is the new lead and asbestos. we now know how dangerous it is to be constantly exposed to it, but now it's way too late to get rid of it and we're stuck with increased cancer cases. I have 2 friends who are morticians, and are from opposite sides of the world. pretty much no one dies of old age anymore, it's all cancer types now

@@reubeng2110 That's what "plastic" means. These polymers won't stay plastic forever, they will lose the plasticity after a certain amount of heat cycles, but so long as they are still plastic they can be heat cycled and reshaped. Once the plasticity is gone however you'll just find they will hit their smoke point and start smoking before catching on fire.

There's no problem as long as you don't cut it directly on top of the bottle like the guy in the original video

@@Megalomaniakaal so dont get it too hot got it thanks.

we used our protracters

bro i just used a pencil

We used our compasses lol

@@rufos5293u were consuming lead then

Spray it into our mouths

how do you think its made?💀 and i hate to break it to you but literally anytjing out of plastic has micro plastics…

Yeah lol

same here bro its ADHD

Dude I’ve been doing that too all day without hearing it lol😊

Catchy as hell

Yeah you got Raffaella Carrà syndrome

Срочные новосьти в Казахстан очень сльноя ораза поверте очень сльноя 😢 рил

No you don't

#freecongo. Save Congo now!! 🇨🇩

I was abt to say been doing this for “cooking” for years

Lost track of the number of grav bomgs I made like this

Melt it back to its original shape

It's a kitchen, he'll use it up within a couple weeks.

​@@wotsit294a couple of days, if that. xD

Who cares if it’s closed anyway? If it’s that big a deal you could cover it with aluminum foil easily

​@@minamihasaki4325A day, more likely.

No thats not how it works As long as it cools down completely its totally safe (Before it breaks down after years in the sun, which makes micro plastics)

​@@ashervaldez9975I've been looking for at least one person with some sense on the whole "enjoy eating microplastics" thing. Thank you...

Gotta love know it nones!

@@nyokamitchell1498me too😂😂😂 they learn a word n run with it

Check out this guy with all his oil in glass bottles and aluminum/steel caps

I genuinely can't find what you're talking about, where is he?

Same I’ve watched the vid twice can’t find him

Bro's schizophrenic

bro u imagining things

have you taken your pills today

lil bro doesn't know we're all already full of microplastics 🤣🤣

Studies show that most microplastics are stored in the balls

Bad news, there is already microplastics in everything

There wont really be microplastics as long as the plastc cools down again and re-solidifies

Dude it's a bottle of seed oil, pretty sure the microplastic isn't the main toxin

Just like every single squirt bottle at any restaurant ever

exactly. And then the oil becomes rancid pretty quickly -.-

@@crthejediknightninjathe ones at my restaurant closes

I mean sure but compare the low chance of ingestion here, to the high chance of eating it in packaged foods and tap water

Ok first of all this is just a demonstration video, and second of all, no one does this unless they're poor or stupid. Not all men are stupid.

What's a micro plastic

​@@hydrokineticit's plastic that's micro

I'm full of macroplastic. One could say I'm plasticmaxxxing

thats why i just use an old dish soap bottle XD

Honestly, with bottles of oil like that, if you drop them the cap pops open more than half the time. Sometimes it even damages the cap so it will never snap closed again. Poking a hole in the top probably saves far more oil in the long run. Getting dedicated squirt bottles works best, though.

you could just not be clumsy and not drop bottles all over the place

Not internet. Go lower. KZfaq shorts, even lower, TikTok, even lower, the dark web.

Venden aceiteras.

atisanal opening? you need to get out more. the lid it has is designed to control flow and keep it from being exposed to oxygen, cooking oil's enemy. unless he's using all that oil in less than 24 hours, he's not only compromised quality and freshness, he's directly exposed it unnecessarily to bacteria, etc. go for it if you want. be ready for the results if not used up very very quickly though

Cringe

With a smaller hole you can have more control of the flow of oil

Not really

@@ballzach346 that’s not a bottle of oil I think

Exactly what I was thinking

Yall worried about microplastics that isn't even in large quantities that wouldn't even affect you while chugging down a big mac everyday.

@@noobymooby-ty8gh I grow, raise, and kill everything I eat, bud. Whatever helps you sleep at night though, lol.

@@dakotamoore4557do you filter the air you breath?

​@@dakotamoore4557 YOU ATE YOUR KID?!

Quelle est la fonctionnalité?

that was the joke

Lol

You don't know how to use "pov", if you write that way you should always start with "when".

@@yamilaw1751 I’m sorry but your english isn’t englishing, they did include “when” at the beginning???

Plastic in the 1900s? Or do you just mean 20th century

@@ShaddySoldierhe said 70s

@@cameron8529 yeah but 1900s has a different implication. That's like me saying "yeah we had neurolink implants in the 2000's"

​@@ShaddySoldier for real. Lol. Great way to put it tbh. Some of these comments, I swear lol.

Use another cap to make a stopper

at that point just buy a dedicated bottle​@@FarangDoingThaiStuff

😂 petition to shut down that restaurant

​@@FarangDoingThaiStuffReally ????🙄😅

Probably it was. Lmaoo

What would happen

Burning plastic and using that same burnt plastic to use in food is crazy dangerous, give all the food used with that a terrible taste, micro plastics, cancer is probably the biggest issue

Probably nothing unless Ur literally chewing the plastic 24/7/12

@@sarahgomes7884 chewing a bottle cap rn lmao

dont look into how plastic is made and heated to form a certain shape then

I read that as Wario oppai and was hella confused

@@tanhanunna6815 You understand Japanese perfectly

@@syounentthave you ever heard about translation?

@@ejebeueh9113 The translation is so accurate too.

@Ageha-bass 黙って、もっと自由を求めてブーガルーを始めましょう。

💀

Oil gasm 😂😂😂😂

good one lmaoo

💀

ongod, the cap is already created to make it easier (for that specific bottle he had), it just adds unneccessary steps for no reason. LOL

@@HotShot725Fr, and the original video was Ranch in a Gatorade Bottle, like what? 😂

He’s really not though

The only thing he’s cooking is toxic plastic fumes

How do you keep it from going g bad ??

Why you burn it? you just need to melt a bit

@@borisotr7086 okay, melt something plastic and smell it, tell me it don’t smell like burnt plastic.

​@@mineofitsowndo you realize that every single peace of plastic you use has been melted? Right?

@@f0ns0r you do realize that not everyform of plastic spreads microplastic? but ofc if u burn plastic u can generate and release pollutants like microplastics, bisphenols, and phthalate gen z big brains

@@mineofitsown its not smell... only burner plastic have it.