Bought a belt loader and modifying it to handle firewood

Рет қаралды 595,585

Күн бұрын

Building a grizzly bar and a chute on an old conveyor truck for handling firewood.
00:00 Unloading and testing it
02:35 2Years later
02:43 Plowing
04:35 Talking
05:13 Starting it
11:28 Getting it inside
13:11 Building the mount for grizzly bars
21:17 Building the grizzly bar
29:04 Building a arm that holds the chain
31:43 Building the bottom piece that diverts the scrap
38:53 Quick test
39:57 disassemble and welding
41:18 Painting of grizzly bar and arm
43:40 Building the chute
52:34 Cooking dinner
53:37 Dinner talk
55:19 Finishing chute
58:54 Painting chute and bottom piece
1:00:43 Reassemble after painting
1:03:24 Looking at the brakes and bleeding them
1:08:18 Test drive on road
1:11:53 Setting it up for a test drive with the wood processor
1:14:09 Testing to see that it works
Link for thermal camera;
US Site - s.vevor.com/bfP9tv
EU Site - s.vevor.com/bfP9tH

Пікірлер: 343

@arunas554 Жыл бұрын

53:05 My favorite cooking channel on youtube!

@najken Жыл бұрын

I truly loved the unexpected lunch break eating hot dogs

@rage2kk3 Жыл бұрын

This man just ate 8 hot dogs like it was nothing.

@najken Жыл бұрын

😂😂

@Kvickification Жыл бұрын

You need many Bullens Pilsnerkorvar to get full :D

@janstahl9589 Жыл бұрын

@@Kvickification 😂😂, behövs pilsner dricka till 😂

@Privateparry Жыл бұрын

I know right!

@rictus7222 Жыл бұрын

I remember when I used to have a metabolism

@incubatork 9 ай бұрын

You could put a couple of hooks at the end of the sawdust/splinter chute to hang a sack on, this will collect the small debris that is good for starting a fire, also saves you sweeping up afterwards.

@BartholomewJenkins69420 8 ай бұрын

great idea

@huninmunin1732 Жыл бұрын

Great video thank you I found the European andrew camarata

@hobbybymyself870 Жыл бұрын

Ant Pants is as good as Bjorn

@rudolfsevcik Жыл бұрын

Yes sir!

@MrPhotodoc Жыл бұрын

Somebody needs to visit somebody.

@EuroWarsOrg Жыл бұрын

My thoughts exactly

@morganfreeman5171 Жыл бұрын

Keep on doing these videos, because I'm sure your channel has the potential to grow big in the future !

@dickdavidson3616 Жыл бұрын

No kidding. 14 videos and he’s at 18.2k already!

@pmkgamingtv Жыл бұрын

Sweden Andrew Camarata 😀

@halkuhns8070 Жыл бұрын

As good a KZfaq Channel as there is! Excellent content!

@halkuhns8070 Жыл бұрын

@@pmkgamingtv Yes! and Swedish Gavin Clark DIY!🙂

@andersholt4653 6 ай бұрын

Brilliant piece of handy work you've done. I'm impressed (and a little bit envious). Thanks for sharing. Greetings from Sweden 🇸🇪.

@Kroooza 5 ай бұрын

He is Swedish lol

@anton2760 Жыл бұрын

When bjoernstroem posts a vid, you press like before even seeing it! Allways bangers!

@M.BJOERNSTROEM Жыл бұрын

Thanks!

@BrianJChelf 7 ай бұрын

Greetings for the middle of the U.S.A. I just recently discovered your channel, and I really enjoy the content. You are a talented man. Lots of snow in your part of the world, around here winter is much milder, but we still get snow every now and then. Keep up the good work and the fine videos!

@Thegrim326 Жыл бұрын

Good job mate I love seeing things being redesigned and used again instead of it sitting in a scrap yard waiting to die

@erwinvandeursen3916 Жыл бұрын

One of the best channels out there.

@mtozzy11 Жыл бұрын

Your firewood system is coming along nicely. Nice use of an old baggage conveyor truck seems to have been fairly well cared for

@fredrick3009 10 ай бұрын

Awesome and inspiring video. Also looks like I have to be the first to it knowledge his 8 hotdogs for lunch. I'd need a nap after that meal! Keep it up man, love every video.

@Timothy-lb2vr Жыл бұрын

His finished weld beads are pieces of art work.

@oliverl8880 6 ай бұрын

By the way …. The weather is still normal for you, a bit of our snow here would be nice too. Greetings from northern Germany

@randytaylor3421 Жыл бұрын

Everything was brilliant, including the hotdogs in a can.

@morgansword Жыл бұрын

Anything automated and saves the back is a great thing

@pixieflitwit1516 8 ай бұрын

Cool machine. Classy hubcaps too.

@rosco0567 Жыл бұрын

Looking forward to this. Wee can and a snack and settle in. Thanks again 🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

@tammyfinch5469 11 ай бұрын

Awww! I wanted to see the belt roll the ❄️ snow off😢. Oh, well. It's not like it won't snow again 😅. I just discovered your channel. I really enjoy watching them.

@M.BJOERNSTROEM 11 ай бұрын

I tried, but it wasn't strong enough to do it! Thanks

@swamprat69er Жыл бұрын

Pretty slick repurposing an old baggage conveyor.

@rogerdudra178 Жыл бұрын

Greetings from the BIG SKY. It's winter around here. Even the snow is deep.

@earlhildebran1733 Жыл бұрын

Congrats, he is the cutest baby. Enjoy him while is small. Tomorrow he will off to college. Take care and enjoy your new bundle.

@MrPhotodoc Жыл бұрын

Never saw a vise quite like the pump style in the shop. Looks much easier and quicker than the rotating handle type.

@timnash6870 5 ай бұрын

Tim from Canada..I have never seen caned hotdogs before… it must be European or Scandinavian country’s that have this…. even here in Canada, we have the cheaper brand of hotdogs and they’re still in a plastic wrapper….. Snyders wieners is the major brand of hotdogs and lunch meats, and sausages. This is the major brand if you want top quality meat…. Then every store has their number named . Brands of meats, sausages, and hotdogs, but even still everything is in a plastic wrapper. I’ve never seen hot dogs in a can before.

@heighRick Жыл бұрын

Solid 8-hotdogs, like a boss! 🌭🌭🌭🌭🌭🌭🌭🌭 Thanks for the video; always great, and helps a lot! Looking forward to the next one.

@jayeff3196 Жыл бұрын

Mr Bjoernstroem....you keep producing these great videos showing us subscribers your skills 👏 .....keep them coming....🙂

@anzicek Жыл бұрын

Awesome work man, I love these fabrication projects that you tackle. Putting old iron to use.

@BMtechnl Жыл бұрын

Man I love your workshop!

@M.BJOERNSTROEM Жыл бұрын

Sadly not mine, just something i can use from time to time

@John-vf9py Жыл бұрын

Ingenious!! Love this entire system. You can load trucks,trailers or make piles wherever you like. Maybe install some lights on the conveyor belt

@tammyfinch5469 11 ай бұрын

😂 yes!

@joescheiner-my4zj Жыл бұрын

Stupid question of the day... I see you are driving the belt loader with the belt in the "UP" position. Have you checked for the safety override?? As a fleet service clerk (aka baggage handler) who uses these daily, they should have a switch that restricts the speed when the belt is not fully down. This is to prevent someone from doing serious damage to a plane when approaching, if the brakes fail. This may be why you are having problems. Keep up the great projects! You are fun to watch.

@DannebergAcres Жыл бұрын

Exactly what I was thinking.

@M.BJOERNSTROEM Жыл бұрын

Never thought of that since its so old. But its a good idea. will check that.

@patriciabockenstette6550 11 ай бұрын

Beautiful work! Thanks for sharing. Look forward to more.

@waste0ftime1 Жыл бұрын

Nice microdose x-ray inspection system you have in the workshop 😂 Nice video as always! ☺️

@chevobelomorkanal Жыл бұрын

awesome video once again!

@M.BJOERNSTROEM Жыл бұрын

Thanks!

@chevobelomorkanal Жыл бұрын

@@M.BJOERNSTROEM now im even more stoked to go to sweden again in august! :P

@annechristiansen941 8 ай бұрын

Tusen takk for god underholdning. 👍🤗👍

@Nakkisampyla 8 ай бұрын

Great machine and look at those wheels with hubcaps!

@barrymurray8264 5 ай бұрын

You are something else !!! That was a great video to watch. I just hope the transmission gets straightened out. That is a wood machine. We have no snow in Middletown Del USA. We don’t expect any til February or March. Be well my friend !

@rods41 7 ай бұрын

Swedish Macgyver! Love the content! Your production quality is really great! always look forward to another upload!

@johneinarkarlsen9747 Жыл бұрын

You are a hard working man. Keep on with that. I like your videos😀😃😄

@patrikpersson9446 Жыл бұрын

That workshop you uses...it's seems to have it all!! Perhaps former Domänverket?

@jerryc3050 2 ай бұрын

Did you just eat all the hot dogs without at least inviting us to share? 😛 I love your cooking stove! Cooling weld doesn't do it, get that blow torch. 🤣

@ahobimo732 Жыл бұрын

I've worked around heavy equipment all my life, but I've never seen one of these before. Really strange and interesting machine!

@M.BJOERNSTROEM Жыл бұрын

it sure is!

@3daystodie Жыл бұрын

@@M.BJOERNSTROEM there’s another KZfaqr his channel is Andrew camarata he is in New York State USA he did a video of a rock crusher it has a belt feeding material through it well he had it replaced on video by a company that replaces them if you was to contact him maybe he could give you the company’s info and either the company can make you a belt or refer you to a company in your country unless you are in the USA then it’s easy or make you a belt then maybe you can upgrade it to do both wood and gravel

@DannebergAcres Жыл бұрын

Ever been to an airport? Lots in use in South America.

@ahobimo732 Жыл бұрын

@@DannebergAcres I've flown plenty of times, but never noticed these machines before. I'll have to keep an eye out the next time I travel.

@JH-lo9ut 8 ай бұрын

This one looks like it was built in the 1960's but seems well cared for. This was back when Sweden was a well, a semi-socialist country. This truck has the logo of the government air traffic authority on it. Government agencies employed a lot of people to care for equipment, whether it needed to or not. Mechanics had lots of time on their hands and they might as well do stuff thoroughly instead of rushing it. These old machines that belonged to government agencies are often in remarkably good condition. Nowadays, everything has been privatized or is run like a business. Old stuff get's thrown out instead of repaired and maintained.

@ShaneCDixon Жыл бұрын

Nice Job with that conversion, I would just try to get better alignment from the saw to the center of the belt to remove that right side feed issue. Great work!

@M.BJOERNSTROEM Жыл бұрын

Thanks, i will do that when i get the truck here and start using this for real

@VicsYard Жыл бұрын

Gotta love them hook loaders. I do the craziest stuff with mine. 👍🏼

@John_Ridenour Жыл бұрын

The brake issue may be any old rubber lines that need replaced, that won't allow pressure release flow back away from brakes.

@M.BJOERNSTROEM Жыл бұрын

Will need to check that in the future

@bonsaj1983 Жыл бұрын

Realy nice Job. Great. Greez from 🇨🇭

@M.BJOERNSTROEM Жыл бұрын

Thank you!

@cncsmarty Жыл бұрын

That truck says farts on the door...I love it!

@miltonchavez1262 Жыл бұрын

Nice modification!

@famousamoso7 Жыл бұрын

Very nice build. My suggestion would be to make the sides of the catch (where it falls on the conveyor) steeper to prevent the wood from resting on the sides and collecting.

@daveleach4357 Жыл бұрын

My compliments on every aspect of this video, they are EXCELLENT. The video quality is terrific and the drone footage is superior to most. Your engineering planning and workmanship in my opinion is Master Journeyman Quality. Your shop makes me envious and is a pleasure to view. I have Subscribed and look forward to more of your videos.

@M.BJOERNSTROEM Жыл бұрын

Thanks Dave!

@richardsummers9009 Жыл бұрын

Ours the One With all the Valentine's ♥️♥️😊🎼🎶

@andrewrobinson2869 Жыл бұрын

Great video . Very impressive, thinking out of the box . I like that, once the truck is under the other side no more loading the truck. Every bit help-in time & energy,

@timstevens7801 Жыл бұрын

A brilliant piece of work well done👍

@bobjoncas2814 Жыл бұрын

.....LOOKIN' GOOD, NICE JOB, KEEP SAFE...

@Larry-325 Жыл бұрын

Always love your projects! Great content 👍👍👍 From Maine USA

@samchososam 8 ай бұрын

Besides the hot dog win…… what a clean shop!!!

@TrinomCZ 6 ай бұрын

I love the snow cap on the cab :D

@Satellite-Man_521 8 ай бұрын

That things awesome, great job. The "truck" itself would make a great around town/home hauler if you bought another and pulled the entire lift assembly and made a total flat deck

@justineheart8200 Жыл бұрын

Since your in such cold place there is a frost free hydrant sold at tractor supplies and it can give water even in extreme cold places!

@M.BJOERNSTROEM Жыл бұрын

Not sure why you think i need that

@Jetli120 Жыл бұрын

Keep the vids coming, really enjoy videos!

@NordicRagnarok Жыл бұрын

Greetings from Denmark. Good job man! Your videos are like Andrew Camaratas, only in a nordic style. I love it. Definitely subscribing :)

@M.BJOERNSTROEM Жыл бұрын

Thanks!

@lucasmcmillan6915 Жыл бұрын

Nice job on that machine

@barttraynor1220 Жыл бұрын

Enjoyable to watch your videos 👍🏻

@larrykluckoutdoors8227 Жыл бұрын

Very nice build

@KeyserSoseRulz Жыл бұрын

You are very resourceful. Good job.

@alainloret2454 Жыл бұрын

Alain Loret

@jimsvideos7201 Жыл бұрын

It is worth highlighting how your can o' wieners was somewhat reflective to infrared. If you need to be sure, put a piece of electrical tape on a surface of interest and set your emissivity to 0.95; that'll give you a reliable reading.

@M.BJOERNSTROEM Жыл бұрын

Good point, did not think of that

@1944chevytruck Жыл бұрын

AWESOME JOB! I LOVE IT!

@terryreynolds1366 Жыл бұрын

Love all of the toys in your shop all of your machines thanks again for the videos from the US states. Georgia usa

@7810jam Жыл бұрын

Another great video!

@comucall Жыл бұрын

Excellent job on elevator, keep the videos coming, Best Wishes from The United Kingdom👍👍

@jonfischer9781 Жыл бұрын

Holy hot dog

@chrispy3866 Жыл бұрын

Canned hot dogs! Awesome!

@stevenpaisley7209 11 ай бұрын

Ya need a can of start ya bastard (Ether ) canadain issue also if we lived closer would give ya a set of snow tires and chains.not mutch use for 14" snow chains any more .How times change .Awsome vidios. Keep up the great work .just found your page .

@andrewcooper8980 Жыл бұрын

Love it. Great idea

@romas3342 Жыл бұрын

Man I love your videos. What do you do for a living and how can you afford shop like that and all these projects?

@dickdavidson3616 Жыл бұрын

Believe this is a family business.

@peted7387 Жыл бұрын

keep going man this channel will blow up

@williamfgreene6855 Жыл бұрын

Greetings from white mountains of new hampshire usa i have a rubber belt conveyor on my cordking processor it took me 30 years to wear belt out 4ply and it was the inside of belt that gave out, outside was very smooth so i put on snowmobile studs so it wood work in winter and in rain. very good job on your modification . 600 usd conveyor outrageous!

@bombardier3qtrlbpsi 11 ай бұрын

Nice job 👍

@playlife86 6 күн бұрын

100.000 followers! Grattis!

@Rebar160 3 ай бұрын

That's cool I've never seen hot dogs in a can.

@harrytaylor6854 Жыл бұрын

Great video really like your shop and the tools you have for being able to build your projects.MMMM hotdogs great way to cook them looks like you enjoyed them .I have boxes of the clamps to lock belts together I have asked people at companies if had any use for them just a no Anyway enjoy your video's well done thank you look forward to more all the best from N.B. Canada

@michaelhounsell3888 Жыл бұрын

Where in NB$

@tomre2769 8 ай бұрын

First time I saw a skidsteer shovel snow :-)

@letsgetsteve 8 ай бұрын

I would always just make these out of bar grating. Simple, cheap and easy to replace.

@bornhunter6171 5 ай бұрын

GREAT VIDEO'S You need to put some folding wheel ramps on your flatbed trailer so you can just drive your equipment on and of that trailer instead of using the skid loader.

@FishingFrustrationsUK Жыл бұрын

saw dust and lil bits that drop threw can be compressed damp and make extra fire wood

@stickhillfarm Жыл бұрын

dude, the last hot dog all of a sudden....😆

@eduardfrazao3506 Жыл бұрын

That’s good job smart man

@RustyNail5856 Жыл бұрын

very nice.

@MrDhalli6500 6 ай бұрын

one solution I see is when the wood drops down from the cut, the wood can canter to the left or canter to the right or be on the left or right side of the belt when it gets pushed into the wedge splitter, the two guide plates on either side that guide the log into the wedge splitter should be a total V this way the wood is always centered on the wedge splitter head on not cantered left or right. The only thing that would effect is the height of the log inside the V, so if it's a small log say 3" diameter it will be low inside the V but if it's a 20" log it will be higher inside the V when it's pushed up against the wedge splitter.

@landscapeone2957 11 ай бұрын

Good Show…

@09FLTRMM77 Жыл бұрын

MM77 Approved 👍🏼👍🏼

@aymasg 6 ай бұрын

i realy like what you do ..keep it going i was looking for some like u 💐

@petertollemark9419 Жыл бұрын

Snyggt jobbat👍

@1stbump Жыл бұрын

SWEET!

@OkayestEngineer 7 ай бұрын

Your videos are so awesome. Your work ethic is inspiring... When you do a project, task, or anything, you do it right - no half-ass. Also, you need to get Helly-Hensen to sponsor you. I am going through all your videos, kept thinking dang I need some of them pants... Finally saw the HH logo.

@hillppari Жыл бұрын

It would really help if the belt had some bolted metal slats to help push the wood like proper conveyers that are made for firewood. Unless you only use it in low angles. Higher angle would make the wood slip without them.