Bounty by Constructo Part 7 Tapering Planks

Рет қаралды 23,434

Күн бұрын

The long requested Plank Tapering video. I have thought long and hard about trying to explain how I do this difficult task, but think I've finally come up with a simple organic method to taper your wood planks, on any wooden ship model, so they fit without needing to know a lot of math, spreadsheets or tables. Just measure the hull, then divide by plank width. It's that easy and I show it all in this video.
Merchandise houdinimodels.com/shop
Buy me a Curry with no lock in monthly contract, just donate what you want when you want:
www.buymeacoffee.com/houdinim...
Join this channel to get access to perks:
kzfaq.info...
To see my videos advert free and much earlier, plus get more perks, then go to Patreon.
/ harryhoudinimodels
www.houdinimodels.com
/ hhmodels
Chapters Click and Go
00:00 Intro and setup
08:07 Working out the tapers
15:30 Marking your model
22:22 Summary

Пікірлер: 60

@yusufshullai2452 23 күн бұрын

Thank you for a most informative and educative video. It really helped! Happy building!

@HarryHoudiniModels 22 күн бұрын

Good to hear… I couldn’t find a clear and easy video on the subject.. took me a few attempts to make but this is the video I wanted to see to help me figure it all out.

@bobmoore4804 Ай бұрын

thank you for making it so simple. to taper my planks.

@HarryHoudiniModels Ай бұрын

Happy to help Bob

@peterbiggin7193 3 жыл бұрын

I'm just trying to choose my first wooden ship to build and the one thing that was holding me back was the thought of having to do the planking. Harry as soon as you began to measure that was a lightbulb moment for me, thank you so much for this video it's now so clear and simple. This is without doubt the best modelling lesson I have had

@HarryHoudiniModels 3 жыл бұрын

Thank you so much. I really wanted to find a simple and intuitive way to describe the process of planking, without sending the viewer to sleep. Hopefully I managed that.

@sub04aru Жыл бұрын

Thank you thank you thank you. Finally someone that actually takes the time to really explain the process and the math behind it. Especially on how and why the hull is separated into 3 segments. I’ve had a kit I’ve put off for a couple of months and now I’m excited to get back to it after this video has just been that spark that goes “ohhhhhhh! I get it now!” Thanks again!

@HarryHoudiniModels Жыл бұрын

Great hear… I found no video out there that fully explained it clearly either. Glad you liked mine and hope it gets your planks on with less stress

@SteveJonesScaleModellingSite 3 жыл бұрын

Stunning work on the planks. Lovely to see

@HarryHoudiniModels 3 жыл бұрын

Many thanks matey!

@brettstuart6887 3 жыл бұрын

Thank you so much! This is the clearest explanation of this process I have seen. Liked and subscribed.

@HarryHoudiniModels 3 жыл бұрын

Awesome, thank you!

@nickbutler7935 3 жыл бұрын

Well done Harry that was very concisely, yet simply explained. The planking work is quite stunning.

@HarryHoudiniModels 3 жыл бұрын

Many thanks Nick

@rikbryan9709 3 жыл бұрын

Beautiful work in progress Harry. Thank you for the clear and very useful information and tips. trying to tackle something like this doesn't seem so daunting now.

@HarryHoudiniModels 3 жыл бұрын

Good to hear, that is what I hoped to share.

@johnforeman6620 3 жыл бұрын

Harry, very clear and a good method for those of us that do not get on with numbers. I have a job to do mental arithmetic while doing something else so now use Alexa as my calculator. It enables me to concentrate on, literally, the job-in-hand and keeps them free at the same time. Keep safe from Oxford, England.

@HarryHoudiniModels 3 жыл бұрын

I could not imagine what it would be like not to get on with math. My brain is full of it. But if my organic method helps you, then my work is done here.

@johnforeman6620 3 жыл бұрын

@@HarryHoudiniModels I do hope you work is not done as I look foreward to your next video! My dad was musical and could not understand thhat some people were not musical. I am good at making and fixing things. These gifts that we can have are often only appreciated when we realise that someone else does not have them.

@HarryHoudiniModels 3 жыл бұрын

We are all individuals with unique abilities... my super power is waffling, apparently! Not done, no time to model this week. The next video will be a while, but I will have the 2nd layer on by then and show how I did it as well as adding the transom plus stern windows.

@chrisemsley7840 2 жыл бұрын

Awesome help. Many thanks for posting this.

@HarryHoudiniModels 2 жыл бұрын

Glad it was useful for you Chris...

@alicebernstein7333 2 жыл бұрын

Nicely done

@HarryHoudiniModels 2 жыл бұрын

Thanks Alice glad you enjoyed my video

@ahsayboy2498 2 жыл бұрын

excellent tutorial...thanks well done

@HarryHoudiniModels 2 жыл бұрын

Glad you liked it!

@socrates2890 2 жыл бұрын

Brilliant! Very cogent explanation, although I think the Bounty hull shape adds to the simplicity. I would be interested to see how this would apply to a more complex hull where the number of planks in a strake varies from the other strakes & the end of the planks would mean cutting the ends by more than 50% (I guess this is where stealers come into play). Still, I enjoyed this very much!!!💯

@HarryHoudiniModels 2 жыл бұрын

Thanks Kevin… have you seen my Steelers and Jogglers video?

@socrates2890 2 жыл бұрын

@@HarryHoudiniModels No, I haven't, but I will certainly take a look. Thank you for pointing me in the right direction!!! 👍

@John_Sharrock 3 жыл бұрын

Great work H,well above my pay grade but i enjoyed watching. Captain Bligh would approve 👍

@HarryHoudiniModels 3 жыл бұрын

Glad you enjoyed it

@sammy_dog 3 жыл бұрын

Fun fact most people know about Bligh and the Bounty mutiny fewer people know about the rum rebellion but not many know about the third mutiny bligh was involved in the fleet mutiny at Nore another fact about Bligh is he wasnt the monster Hollywood made him out to be if anything he was lenient on his crew compared to the average captain of the time

@CHIL2903 3 жыл бұрын

@@sammy_dog He was a first rate navigator as well, Sammy.

@houseofpipes9708 2 жыл бұрын

Hi Harry Greetings from the UK I love your videos and at 82 years old I am on my third wooden sailing ship.the Occre La Candelaria After two catastrophic disasters I have managed to fully lay my first set of planks on my third model thanks to your videos.I am about to start my second layer and Occre are suggesting using contact adhesive I hate the bloody stuff can you recommend anything more suitable? Many thanks Roy

@HarryHoudiniModels 2 жыл бұрын

Thank you Roy.. I swear by Selleys Aquadhere PVA white wood glue, although most good quality hobby wood glues should work. This bottle should last you 2 or 3 wood model builds. www.ebay.co.uk/itm/264788801260

@houseofpipes9708 2 жыл бұрын

@@HarryHoudiniModels Thank you Harry I'm on it

@1942catman 7 ай бұрын

what would really like to know is how do you hold the second level of planks while the glue is drying without putting holes in the nice planks thanks@@HarryHoudiniModels

@HarryHoudiniModels 7 ай бұрын

Hi Roy… The second layer should be of very thin planks about 0.5mm so they only require a little soak in warm water, wipe dry, then use PVA white wood glue and a plank bending tool. This tool is a soldering iron with a big round end on it. With your plank a little damp, and just touch glued approximately into place, I use the soldering iron tool to gently heat press them to position and the shape of the first layer. Don’t over do this or you burn the planks. The heat sets the PVA white wood glue and irons out the planks firmly in the bend and twist you need. They should then be stuck fast and formed to your hull shape. If they won’t bend enough you need to either add a taper or a joggle/steeler plank. I have shown this technique in one of my other planking videos.

@HarryHoudiniModels 7 ай бұрын

You can also add drawing pins just outside your plank, so they only make a tiny hole in the first layer, not the second layer plank. These will hold the plank in place until you can use the soldering iron plank blender for stubborn curves or twists.

@sammy_dog 3 жыл бұрын

Harry theres never enough waffle from you

@HarryHoudiniModels 3 жыл бұрын

Sorry Sammy... I promise the next video will be 100% waffle to compensate you.

@sammy_dog 3 жыл бұрын

@@HarryHoudiniModels thx H

@Yorkie285 2 ай бұрын

Can I use a wood glue for the 2nd planking? Thanks

@HarryHoudiniModels 2 ай бұрын

I use PVA white wood glue for all my planking. Did I forget to show that? I don’t like to use superglue with wood. May stick today but has a habit of shearing then snapping off in the future. Contact adhesive can be used but doesn’t have the same flexibility as white wood glue. So if you make a mistake it is very hard to correct it.

@Yorkie285 2 ай бұрын

@@HarryHoudiniModels Thank you for the expert info greatly appreciated. I'm a beginner and hopefully learn from you.

@Yorkie285 2 ай бұрын

@@HarryHoudiniModels What brand of PVA glue is best?

@HarryHoudiniModels 2 ай бұрын

All depends on where you and what you can get… I use Selleys Aquadhere. It dries quick enough to get tacky and hold in just a minute or two, then sets firm overnight. Dries clear and sands easily.

@tonytwentyeight 8 ай бұрын

Thank you. Very good and certainly has helped me. Just finished my first layer and it’s dreadful. My problem is that when I divide the bow and stern ends by the 15 planks I need at mid bulk head, it comes to way less than half a plank width to fill in the gaps. So I don’t know what to do? Any help would be greatly appreciated. I’ve currently got the last few planks only glued to two bulk heads which I know is not right. 😢

@HarryHoudiniModels 8 ай бұрын

In my earlier videos I show how to chock the bow and stern with balsa blocks. This solves the problem of planks hanging in mid air and gives them a shape to form around where the bends are more obtuse. Not sure how you would add those blocks after started planking, but if you can squeeze them in, it helps support the tapers. Also look at my video on Joggle and Steelers. This method avoids going too thin on tapers by turning a 3 plank run into a 2 plank run. kzfaq.info/get/bejne/e9VlqdSX0OCxaIU.html

@tonytwentyeight 8 ай бұрын

@@HarryHoudiniModelsgreat, thank you. 😊

@user-lk2cj2qs1d 6 ай бұрын

thanks in full size boats you can decide how many is needed get adding machine tape mark the sheer to keel distance at midships and transom use a board that goes to a point mark on the tape the distance at each bulkhead and spile the planks with a compass models are too small for all that

@HarryHoudiniModels 6 ай бұрын

Model Ships are always a compromise and approximation of the real thing. My tapering method works for me and produces a look I feel is close enough to real ships.

@user-lk2cj2qs1d 6 ай бұрын

@@HarryHoudiniModels Thanks what are your favorite glues Have had mixed results with Hobby Lobby Extreme power super glue Wanting to make a pond yacht of a boat of plans I got from the Smith which is similar to a sandbagger Where the tip of bowsprit to end of boom is about twice as long as the hull

@icu_art 2 жыл бұрын

execelet thanks a lot at German you are not Abel to fing good tutorials

@HarryHoudiniModels 2 жыл бұрын

I am happy it was useful

@moikehunt8928 3 жыл бұрын

Harry! Will you marry me? I will even bear your children.

@HarryHoudiniModels 3 жыл бұрын

Only if I can sleep on top!

@moikehunt8928 3 жыл бұрын

@@HarryHoudiniModels Dost that be the chime of wedding bells I hear? Yessssssssss

@HarryHoudiniModels 3 жыл бұрын

I require a dowery of 3 goats, a barrel of cider and a windmill.

@moikehunt8928 3 жыл бұрын

@@HarryHoudiniModels I'm sorry but that's just being greedy, how about two rabbits, a flagon of goon, a fidget spinner in the shape of a windmill and you sleep in the wet spot......... Oh, and a 1 Shekel Patreon subscription? My final offer.