Get free life insurance quotes from America's top insurers and start saving today with Policygenius: Policygenius.com/bourbonmoth. Thanks to Policygenius for sponsoring this video!

The intro of this video is basically my life😂😂 never felt so connected with another man before 😂

This confirms that its easier to build with brand new material, then making it look old, than working with old material. But deep down, it is so satisfying to give new life to old stuff.

I will never again be able to smear glue anywhere near a crack without a giving up a little chuckle. And I'm sure I'll get funny looks. And I'll have to explain it. And they won't get it because I won't be able to explain it right. And they'll think I'm weird. So thanks, Jason, thanks a lot! 🤣🤣🤣

One important points (I work with reclaimed wood alot) : Always brush it off / vacuum / do a light water wash first. It can be covered with lead and/or asbestos dust from old construction. (or worse stuff). I also always do an extra lead test just in case.

My Grandfather is my inspiration in my shop… He built everything in the homestead house… including the house… When he passed I knew I had to keep his memory alive, so he is with me in my shop always. Happy Holidays to you guys! And Merry Day of Birth Wally!!!

Great table. Your wife is a real looker. 😊

Love your show,I'm a disabled veteran on a fixed VA income, and I would like to become a patron, but I just wanted you to know that. Always look forward to your next show. Also, it taught me a lot. Thank you 😊

I log onto KZfaq and "Save to Later" stuff I want to watch later, except your channel. I watch your channel immediately. Always funny.

if you're going to use reclaimed wood more often get an hand held metal detector to find all the nails.

Opening skit was essentially the "you don't need to sell it to me, I already decided that was what I wanted" meme

Best intro ever!!😂❤

That looks great. Like a real old reclaimed table.

Another great video. The finished product is beautiful. I must say, though, that the opening scene of the discussion between you and Mrs. Hibbs was deja vu for me - it is almost an exact replay of a recent discussion with my wife. I was laughing so hard I was in tears. Nicely played..

Sure you did, but for those less experienced: make sure to seal any exposed MDF, especially where it might get damp, like at the bottom of the legs, as it soaks up water and swells like a beast.

Just like that?? Love the result but this has inspired me to go out and buy a table .🤣

You always make such funny videos Jason. Best content on KZfaq.👍🏻

I've worked with reclaimed poplar (barn wood). I used a magnetic stud finder for the nails. I've also seen a handheld metal detector used. RIP bandsaw blade.

MDF core with veneer on top. It's just like IKEA! 😁

The table turned out great. I'm in the process making a dresser for my youngest son using wood from a house he bought that was built in 1916

Jason, thanks for making this video using reclaimed lumber. I think that there are quite a number of woodworkers who use reclaimed as their primary wood source. I agree that reclaimed lumber has some challenges, but as you have shown , they can be overcome. I also think that a lot of woodworkers start with inexpensive wood to build skill and confidence before spending 600 bucks on hardwood and making happy accidents. Musings of a local Albany guy.

I used to produce furniture using only reclaimed wood here in Brazil. I love how it looks.

Reclaimed wood was where I started my wood working journey. It's nice to see it done in a much better fashion than I could lol

Shawn here,I have a fully loaded shop in Florida which needs an out feed table, wink wink lol,we have a guest floor at our home, thanks to you I bought most of wood pecker tools, great stuff ty.come on down ! thank you for all your content!!

I only work with reclaimed wood. It's cheaper and the reward is much greater once finished. Knowing what the board looked before and then seeing the final product is very rewarding.

Great video Jason, as others have said, using reclaimed wood is something that I have done but not often. Would have loved to see your wife's reaction to the beautiful table you built her. God Bless, have a nice weekend.

Nice looking table! I have used the tape method for doing miters for years. A quick tip is to take a steel tool such as a screwdriver shank or the top of a knife blade and run down the sharp edge lightly before removing the tape. You can use hard maple scrap as well. This closes up tiny gaps and really adds to the overall appearance when the tape is pulled.

If your ever strapped for ideas you could make my favourite thing in the world, a pool table that transforms into a dining table. 👍

"...or Gramma chuckin a bowling ball through the house.." CRACKED me up!! I had to pause to go tell my daughter.

Really like the combo of voiceover and talking directly to the camera. Gonna have to try that since I’m awkward AF when talking to the camera still lol

Awesome! I love reclaimed wood. It has so much character.

Your vision will become clear only when you look into your heart. Who looks outside, dreams. Who looks inside, awakens.

The reclaimed wood vernier over the MDF legs turned out way better than I expected. The table looks great.

What a wonderful table! One would hardly guess you just made it and didn't just find it in an abandoned farmhouse. Well done!

Thanks Jason, love watching your videos Saturday morning.

I noticed you have raw MDF ends on the bottom of the legs. Since MDF meeting water ends up disasterously, to prevent possible water damage from washing the floor or drink spills, I probably would have started the leg veneers by capping the bottoms with a 1/4” or so layer of hardwood that is sealed with thin CA glue after gluing them on. Then apply the side veneers. … I did a similar project, making a “rustic” tressel (sp?) table with the base made from 5x7 oak timbers with pinned mortise and tenon joints. Fitting up the joints was a real challenge, to be sure! The top was made from similarly aged oak planks, all from my neighbor’s barn. He and his wife loved it!!

looks fantastic, probably my fav project you've done in terms of aesthetics

Amazing Craftsmanship! Well done!

That looks absolutely stunning. The simplicity makes it even better. Amazing effort.

Well this came out at just the perfect time. I've had a request for a reclaimed wood piece for a relative for Christmas and this answered a lot of question that I've had on my mind. So, thank you!

I got myself a restorer tool a couple of years ago - absolute game changer for working with barnwood

Omg that is fabulous! I love reclaimed wood ❤️

Looks awesome!!

Outstanding outcome!

Fascinating. A master at work. Thank you!

The author does like to from scratch, kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

Great job as always sir. Congratulations.

Just made these same legs out of oak! I had an idea to use my Japanese pull saw to finish up the taper (ouch). Fortunately halfway through #2 I remembered I own a nice bandsaw… I then used a #5 plane to clean them up. Honestly your approach to this is brilliant. MDF - never would have thought of it!

Terrific work on that reclaimed wooden table Jason! Happy Holidays to you & your family! 👍👍🌲🌲

Great job, fun project!

Great content. I always learn something new watching your videos. Thank you!

Cool build! Loved it.

Simply wow!

Amazing job, I love it!

Tip for getting a darkened, rustic look on your timber: stain it with used engine oil. Works surprisingly well, especially for harder woods which won't absorb regular stains or oils as readily.

Ничего себе здоровый стол получился! Класс, приятно смотреть твои видео, друг!

This is your best project in youtube so far, I would like to thank your wife for it

Beautiful!

Looks like a dining table I’d love to make! Thx. Happy holidays.

@Bourbonmoth my 85 year old gma just passed away 5 days ago from a 12 year battle with Alzheimer's. I want to thank you for the great vids. They really help take my mind off things.

You do some awesome work.

Merry Christmas Jason! Before long, you'll be making epoxy river tables too!

Thank you for sharing

BRILLIANT !!!

For the legs, could you have done kerf cuts to bend it? I know it was already pretty thin material to work with.

Nice work!

Beautiful work Mister.

Gotta start calling the tablesaw the "almost finger cutter offer"

Table looks awesome Jason! Well done 👍🏼

That’s beautiful! I love the trick with the legs!

Nice piece. Good job.

Love the Flight of the Conchords poster

I would LOVE to have a table from the barnwood in the back of my reno farmhouse. We're reclaiming what we can for the floors right now. ❤❤❤ beautiful work!

Table turned out great 👍

I’ve been waiting on this video I work with barn wood a lot nice to see how you went about things

Love the Flight of the Conchords poster! (Also the rest of the video is cool too I guess)

I work exclusively in salvaged lumber. Fortunately, I have only had one client that wanted the whole patina thing…….this was for a mantle and some matching counter tops…….all of my other clients seem to be looking for the story of the wood, and the filled nail holes and some dings and dents, but with new, smooth surfaces. I love your approach….and of course it turned out great.

Dirt as stain! I love it! Like you, I'm not a big fan of working with reclaimed wood but you friggin nailed it! Just beautiful. Keep up the awesome work.

I’ve got about 500 board feet of old redwood 2x12’s to reclaim. They’re from the 1960’s and held up pretty well. This video will go a long way, thank you! 👍

Love the intro... sounds just like my wife. We used to go to the auction way back when in Aurora, OR. Nice!!

So i searched for just the tip, and not my crack.. and this was the top video. It did not disappoint! FYI your quartering technique always works with 8 ish ft reclaimed boards due to the fact that you get 4 pcs from each board.. and that even a 5 leg table has 4 legs in the end :) Bravo my man.. Bra vo.

Awesome build. Using the mdf and reclaimed veneer was a great looks looks amazing!

Making the 2 clamps hold hands in the middle 🤣

Jason, great work, even if the intro has left me mentally scarred 🤣🤣🤣

I am getting strong IKEA vibes from the MDF approach. Watch out for a line of "reclaimed" wood furniture at your local IKEA in 2024.

It turned out nice. I do a lot with reclaimed wood. Sometimes it's a pain. I do like the way you approached doing the legs.

Great video

I know you only used that tapering method because your blade wouldn't pass all the way through, but that actually seems like a great way to do two sided tapers! Def better than taping on your off cuts at least.

Oooh lovely mdf dust, nice

INCREDIBILE

Love that place in Aurora! Can be a little pricey but you get great stuff.

Always look forward to your builds and how you make it look so easy, least i forget, your great sense of humour :) Big up from England bud.....!

Love all your project ideas, Jason. Have you ever thought about building a pool table? That would be a great video. Keep up the great work 👍🏻

it is looks very nice. I like how the legs turn out.

Great Job bro, Greetings 🇲🇽

Well as usual, you have created a beautiful piece of furniture! I am always amazed at how you figure out how to create what you make! That is real talent!!!❤

Very nice overall ❤

Love the intro!

The look of reclaimed wood is one of my favorites, just always hated the function. Like you mentioned about maintaining that look on the top side, sometimes by not milling it, you get some high spots and plates or glasses tend to rock…which I think makes it a barrier for choice for me. But it looks amazing man.

I've used reclaimed lumber for shop projects such as my work bench, shaving mule, and other things just because I can get so much of it cheap. Locally it is mostly Douglas Fir from barns/outbuildings. Most of it is also old growth, heavy and tight ringed. If you are lucky you can get long lengths of rafters and floor joists too. From my experience it really depends on who you get it from on the quality and work you need to put into up front. I can get a ton of wood cheap but then need to spend time cleaning it, searching for nails, pulling them, and then truing up the wood. The money you save on materials can easily be eaten up by that additional time to make it workable. I would say as soon you get reclaimed wood is to decide on the finish you want to keep. If it is all the aging just stiff brush it to get rid of dirt/dust. If you don't care about that wash the wood and either brush it or lightly pressure wash it. It is always full of dust, dirt, and rocks from its time in a building and being moved, and that stuff sucks on your tools. After that is nail pulling. Never assume all nails are gone, get a good metal detector and nail puller and check them carefully. Even the guys who pull them for you before you buy will miss things. I even give it a final once over before running through the saws even if I pulled them. Once all of that is done you have awesome material to build from, and I still find it the best way to get cheap wood for my own projects where time doesn't matter as much, assuming Fir is ok for them.