Box 1 The Henckles Set on 1x30 start to finish

Рет қаралды 2,194

Alexandria Knife Sharpening & Laser Engraving

Күн бұрын

This is the Henckles set of knives that came in for sharpening. This is a very common knife through all shops lots of people own them. IMO they are a good middle of the road knife keeping in mind they have several models from low to high end. There best knives are their Zwilling's Brand Knives made in Germany. Many of the Henckles are made in Spain

Пікірлер: 30

@kennyhallam 6 ай бұрын

Thank you for the amazing videos!!! I have a mobile business and love learning how to do things better!

@ALXSHARPEN 6 ай бұрын

Mobil is a great way to do it. It also has some challenges, you have to work fast. I like that I have most of my customers knives from 1-3 days or more on average 3 day. Some of the stuff I do may not be perfect for your business model. Mostly the polishing stuff. It's hard for me to get under 7 min a knife if I polish and clean up it's appearance. How much time do you spend per knife? and whats to long for you? I find most mobil guys want to be under 5 min a knife some even less.

@DaleElder11 6 ай бұрын

awesome video, thank you.

@ALXSHARPEN 6 ай бұрын

Glad you liked it!

@QualitySharpeningService 6 ай бұрын

Great video!

@ALXSHARPEN 6 ай бұрын

Thanks!

@Blacksmith1967 4 ай бұрын

Nice videos you make 👍👍 l just purchased a Toolcker like you use in the videos..Do you have a video how you upgraded the machine with the angle guide or explain how to do that...?...Out out the box l have serious tracking issues with the machine.. Did you have the same issues with your Toolcker..?..If yes how did you fix this very pain in the butt issue...?

@ALXSHARPEN 4 ай бұрын

yes i have an entire group of videos on it check the categories

@kennyhallam 6 ай бұрын

I am hoping you can give me some advice. I always struggle with thinning out the blade right at the bolster. I dont know how to perfectly explain this but after I reduce the bolster and after thinning out the blade at the bolster I always end up with the small little point like the the thickness of a needle sticking down from the blade about a 1/4 from the bolster that cause the blade not to make full contact with the board at the very end of the blade. When I try to fix it I end up making the very end of the blade by the bolster dull to where it needs thinned again and so begins the same process. I don't know if it is the angle a which I am coming at the grinder right near the bolster when thinning it. Just to mention I do sharpen edge trailing with out a guide. I have the MuChaIOAK Belt Machine you are using and hope to use your angle guide setup here soon. I hope I have somewhat explained my issue. Thank you again for the videos and any advice you may be able to offer from my convoluted explanation.

@ALXSHARPEN 6 ай бұрын

I will try and do a video on just bolsters in the next week or two and will show what I do to deal with them. I had a set the the worst I every saw recently. I cant remember if I videoed them they where so long. They had not been cut back in 30+ years of sharpening on a pull through machine. I have no idea how they where even using them they were so in the way. LOL

@jordanjohnson7266 6 ай бұрын

Love this series Paul. Did you move away from the pink plastic/wood polish from Combat?

@ALXSHARPEN 6 ай бұрын

no I still use it for wood and plastic handles I also have another one I like that's very similar its more a cream color

@ALXSHARPEN 6 ай бұрын

I had that before Combat so I still have some small bars of it around the Combat bar may last me forever its HUGE

@cpen9667 6 ай бұрын

excellent content as usual. can you please make a video how you create your diamond spray? or just provide the recipe in a response?

@ALXSHARPEN 6 ай бұрын

Yes I have one I have to refill soon I’ll do a quick video

@ChristopherSalisburySalz 6 ай бұрын

What do you spray them with to clean them?

@ALXSHARPEN 6 ай бұрын

at the end lysol surface cleaner if I have to get sharpie off 99% iso alcohol

@jaycooke3672 6 ай бұрын

Do you have a link or suggestions for ordering the knife sheaths?

@ALXSHARPEN 6 ай бұрын

I got mine when I started from Etsy, but when I got big enough making good money I had them made by a company in China and it cut my cost from around.40 cents each to around .07 so a big savings, but I also ordered a big order Here is who I get from Etsy I like the uncut and cut myself saves you a lot www.etsy.com/shop/USAKnifemakerSupply?ref=yr_purchases Here is where I get my big orders from I ordered 5000 www.alibaba.com/product-detail/Custom-Razor-Sharpening-Blade-Edge-Protector_62295525939.html?__sceneInfo=%7B%22type%22:%22appDetailShare%22,%22data%22:%7B%22filterKey%22:%227.8.2_share%22,%22cacheTime%22:%221800000%22%7D%7D&from=IOS

@thomask837 6 ай бұрын

Well done Paul, although I think you did your PPE incorrectly 😂

@ALXSHARPEN 6 ай бұрын

You are correct but you can't hear me if it's on and im running my mouth

@eljonnymac 6 ай бұрын

Do you edge lead when stropping?

@ALXSHARPEN 6 ай бұрын

Never you will cut your strop - Stropping is always edge trailing

@eljonnymac 6 ай бұрын

@@ALXSHARPEN thanks! You got a new sub and that’s what I thought. Went from a wet stone to lansky back to wet stone and now this. I offered to sharpen my friends knives with a wet stone and they gave me like 13. Took forever!

@dougsmith4525 4 ай бұрын

Where do you get the paper sheaths? Tt

@ALXSHARPEN 4 ай бұрын

message.alibaba.com/message/maContact.htm?spm=a2700.12243863.0.0.1df83e5fWMfHXv&contactEncrypt=MC1ID1BE64DKoknqBVgOeQfs2e1mr53sb_GkH1TB-Ku5kDgbU* From Mary Haung mhpackage.en.alibaba.com/?spm=a2700.9014153.0.0.264f3e5f7glBxf