It's super easy to change the blade in a box cutter. Check it out! Please subscribe if this helped and for daily new content!
Пікірлер: 83
@joannebutzerin6448 Жыл бұрын
Thank you! I've had the red plastic one for years and never knew how to replace the blade. Was just about to throw it out when I decided to try and find info on KZfaq and found your video. It wasn't exactly the same but close enough for me to figure it out. Thank you!
@ackselforteaate4 жыл бұрын
I couldn't tell what you were doing. After 5 minutes of staring at everything on my worktable, I figured it out.
@BigMTBrain2 жыл бұрын
Haha... I have one of the thin, multi-blade types that I was banging my head over. As soon as I saw the rear cap pop off, I slapped my forehead -- dead simple. Thanks! Praise the teachers! And praise KZfaq -- one of the greatest learning resources on the planet!
@cheebone31523 жыл бұрын
Thank you. I have one like the red one. I have had a stroke and sometimes I forget little things like how to change the blade of a knife I worked with for decades. I voice searched and it took me to your video. Thank you!!
@unhandydave24783 жыл бұрын
Love that!! Thank you for your comment and I’m glad it helped. Not the best quality or filming from me but so glad it helped. Comments like that make me want to keep it up!! 🙏
@kayperret2417 Жыл бұрын
Oh. My. Gosh. I was driving myself crazy trying to figure this out. You just saved my sanity! Many thanks.
@Sujowi5 жыл бұрын
Thanks for that...I could not work it out but you showed how easy it is.
@unhandydave24785 жыл бұрын
So glad it helped!! Thanks for watching!
@mukhlishmuda9747 Жыл бұрын
Thanks! I was on a deadline and you saved me
@g.brizzle12197 ай бұрын
Hell yeah brother this video is 5 years old and just saved my ass big time 🤣🤣
@mikethebike2456 Жыл бұрын
🏍️ Sad that i needed this video to get the blade out.
@TheRealMikeNelson3 жыл бұрын
Thanks for the video. It was exactly the information I was looking for. Very helpful!
@marialiska105410 ай бұрын
Dzięki za pokaz. Gdybyś nagrał to wideo umieszczając swobodnie w kadrze Twoje dłonie a nie same palce z mało widocznym nożykiem, to byłabym zachwycona... Musi mi zadziałać wyobraźnia! Za sam temat bardzo dziękuję i pozdrawiam.
@deanmatthews563 жыл бұрын
On the thin red handle cutter, a lot of the demonstration is out of frame and often your hand conceals the mechanism. But, I get the general idea of it. Thanks
@desertdude15 жыл бұрын
Just what I was looking for thanks
@xbeastguyx1553 жыл бұрын
Isn’t the second box cutter segmented? You can pop the bottom piece out and there’s a groove you stick into the blade and pop it off
@ladylisp3 жыл бұрын
Thank you! THAT is what i was looking for, how to do. :D
@flow3rgurll11 ай бұрын
Literally trynna do that can't figure it out
@20newleigh6 ай бұрын
Same
@heidistanton4583 Жыл бұрын
Thanks, felt so stupid I couldn't figure it out.
@lboss8756 ай бұрын
I feel super dumb that I couldn't figure that out on my own...lol. TY!!
@anthonyjones8076 Жыл бұрын
Simple once you know how. Unfortunately until I was this many years old before I knew how. 😁
@Laura-tb7nm24 күн бұрын
Thank you. Though this could have been a 30 sec video.
@user-tn2ns5gc9t3 жыл бұрын
Thank you for the Arabic translation your friend Abraham from Saudi Arabia
@raesam62 Жыл бұрын
Thank you sooooo much!
@ABCD-eb6ly Жыл бұрын
Thanks man you really saved me here😂
@pamgeoffroy51673 жыл бұрын
Thank you, this is exactly what I needed!
@mahyur Жыл бұрын
I got four replacement blades with my box cutter, never knew how to replace them until now.
@chezkastle8 ай бұрын
Thank you!
@untamedfaye Жыл бұрын
Thank you 👍🏼
@BenghaziXD19 күн бұрын
thanks man
@martinkerr5848 Жыл бұрын
Thank you.
@jodielee64988 ай бұрын
Thanks!
@karlyorellana526 Жыл бұрын
Really helpful. Thank you!
@ultraali4534 жыл бұрын
Thanks Dave! That really helped
@hadiyah212 Жыл бұрын
Thank you
@samuelcaesar33934 жыл бұрын
About to make an attempt at one
@ednavalencia76473 жыл бұрын
Thnx, very useful video.
@coachcharlietennis5654 жыл бұрын
Thanks for the video..
@markleegstra60124 жыл бұрын
And I consider myself an engineer, needed help changing a box cutter blade...
@padraiggluck56334 жыл бұрын
I didn’t know the back comes off the snap off model.
@_m3ytr0_443 жыл бұрын
i consider myself a bit of an engineer but i couldnt figure out how to crack the box cutter blade properly
@Arjun-yl8rs Жыл бұрын
Thanks man
@MuhammadShafiq-ro1sh2 жыл бұрын
It was very very useful thanks for the help it was the exact information 😊 thanks again ! ❤️
@callmehjl3 жыл бұрын
Thank you💖
@mixinfo51874 жыл бұрын
helpful bro keep it up
@cynthiarivera23034 жыл бұрын
Super helpful!! Thanks (:
@yolandacastleberry73453 жыл бұрын
Thanks
@ariffreejal99643 жыл бұрын
very helpful. thanks.
@MrDevtun5 жыл бұрын
Thx, very helpful. Have a Heikio ratcheting breakaway blade type like your red one there. Excellent box cutters, but was puzzled at how to remove the blades.
@VillSix3 жыл бұрын
thanks!
@AndNowIWrite3 жыл бұрын
I gave myself a headache trying to figure out a cheap plastic knife. I think most of it was fear something would snap and I'd lose a finger. Thank you!!!
@joerei18652 жыл бұрын
it was dizzying to watch your video. You need a fixed camera for your vlogging .
@silklavender4 жыл бұрын
Omg this helped so much fank u
@kathleenryan3673 Жыл бұрын
Dave - your video has the bottom cut off. I have the three black pieces off but now cannot see how they go back together. I need a CLOSE UP Video. Help
@charlotteamilia581 Жыл бұрын
Why am I the only one struggling with the tail cover 😭😭
@user-yh5ns8ld3h2 ай бұрын
After 9 months hopefully you've figured it out but it should show off to your right, with thumb and pointer finger gripping the indentations
@gypsea80363 жыл бұрын
Blades come in safety pack ,so you don't have to handle them, but how do you put them in the knife????????
@Gage2k33 жыл бұрын
What is the name of the silver Box Cutter?
@elizabethclaiborne6461 Жыл бұрын
Can’t see how it works if you take the knife off camera below the frame. Also, your camera has a zoom. So we don’t have to squint from optical six feet away.
@lindasmith60053 жыл бұрын
I found the lesson moved to fast and the knife wasn't always center on camera. Now I have my knife apart and I can't figure out how to put it back. lol
@RinTheRebel4 жыл бұрын
Believe me or not I’m actually watching this for animation purposes
@osiriswillmont78564 жыл бұрын
Moving way too fast and can't see what you're doing at all
@walteryoung87932 жыл бұрын
Too fast on first and I couldn’t see how you placed it. My blade pops into two parts.
@mastershredder2002 Жыл бұрын
This video is beyond useless and takes forever to explain a thing that could be explained in a 10 second reel. The head camera does not help too. Thanks for wasting everyone's time.
@user-vt6wt6xn4q3 жыл бұрын
astmr 😘
@bendgtn405210 ай бұрын
We can’t we can’t see your video try watching
@32ghostworld3 жыл бұрын
I have NO idea what he just did or said
@gypsea80363 жыл бұрын
Pack of blades enclosed in plastic with slider on one end. makes no sense?.......
@Rafiabuttful4 жыл бұрын
This video did not help :((
@vovkahome775 жыл бұрын
you filmed your table not the object
@CourtneyQuenzer-xw8ii Жыл бұрын
Your vid is off screen! Not helpful when you have the same problem you were
@ABetterShreveport3 жыл бұрын
Your garbled, poorly enunciated narration on the red-handled cutter (poor camera work, to boot) was seriously frustrating. Jeez.
@v1ndicate1604 жыл бұрын
It doesn't grip
@gypsea80363 жыл бұрын
Blades come in a safety pack ,explain how that works
@fatori072 жыл бұрын
I’m sorry but next time could you be sure that we can see all of the picture. Half the time all we get is the tip of the tool your working on and have no idea what your doing. I appreciate your efforts but terrible video.
@tonydanis14802 жыл бұрын
Terrible video skills, lol, but fun. Hire a teenager to do it for you next time! Seriously, keep the object under discussion within the frame and closer to the lens, and talk slower and point out every feature in detail.