box spreader

No video

box spreader

Рет қаралды 295,579

paul mullen

Күн бұрын

this is a box spreader fitted to an iveco 18/230 spreading 804.

Пікірлер: 46

@MarkJohnson-ou6xz Жыл бұрын

Ran one of those for a couple of summers back in the 70's! Makes me feel old! Oh wait, I am old!

@genecoppedge5972 4 жыл бұрын

That is one sweet spreader!

@RC-Heli835 3 жыл бұрын

I'm sure if you went to this measure that you had a smooth barrel roller nearby? This certainly does an outstanding job.

@RoadSafety855 4 жыл бұрын

Mr.Paul ..Simple box spreader,good idea but An agar attachment just before the auger can save time and speed the work.. Power can be had from.pto vai hydraulic pump same hydraulic power you are using for tipping cylinder ....

@MrPjmullen 4 жыл бұрын

Baldev Singh very true ... but it’s simplicity is what makes it so handy , could put hydraulic this that and the other on it and make it work like a paver but not a paver , it works just fine and since been adapted to be pulled and filled by a 4ton digger .. any truck , dumper or trailer can pull it without any adaptation..

@ivanmullen3015 3 жыл бұрын

Cool, I built one for myself some years back based on an old British design Its 8' square with a central blade and it can be adjusted out to 9'. Runs off chains.

@ederangelo21 2 жыл бұрын

Where i see it ? Have some vídeo pra link ?

@MrPjmullen 8 жыл бұрын

It's an 804 foundation material yes it's rolled and surfaced with two layers of tar and chipping after.....

@anthonylentini6278 7 ай бұрын

is that like a layton pull box?

@skidlyane 4 жыл бұрын

Автору Нобелевскую премию!!!😃😎👍👍👍

@brucebonkowski9568 2 жыл бұрын

Where in the us did you order it I like one I tried to use a box scraper but still has issues

@felixariola5251 6 жыл бұрын

Can i have the details, ie. dimensions of this spreader? Many thanks in advance!

@mrbig2295 5 жыл бұрын

Why doesn’t he hook the tailgate chains to the truck bed to control the flow! I made my box similar to that and I don’t do hardly any shoveling!

@MrPjmullen 5 жыл бұрын

Mr Big .. at that time , the two arms pulling the box were very long , by chaining the tail door it would have thrown the stone forward even more missing the box completely plus , box kinda needs to be heavy to stop it rising as it’s pulled , ..

@Iowagrown123 4 жыл бұрын

A good operator should be able to set the chains and get the right speed up to tailgate spread, without need for the spreader?

@MrPjmullen 2 ай бұрын

@@Iowagrown123.. good operator ? .. I’ve seen lots of, but god operator cannot predict consistency, rate of flow and speed , moisture content, .. the only part that’s consistent is gravity .. tailgate spreading is fine when followed by a grader or forestry roads , but not for finishing prep ..

@michaelgarcia262 5 жыл бұрын

What is the make and model of that spreader box ..I cant seem to find one like that anywhere on the web...

@MrPjmullen 5 жыл бұрын

Michael Garcia hi .. it’s manufactured by J-pyott associates.. in the US .. I imported direct from them , a gentleman to deal with and very helpful...

@seankenny5412 Жыл бұрын

Paul do you still have this

@donnysierra6766 6 жыл бұрын

How do you hook the box to the truck? And say one side of the road is higher does the box adjust ? or can you adjust the box?

@MrPjmullen 6 жыл бұрын

Donny Sierra .. hi .. it’s pulled by two solid arms (length determined by tipping radius) two pins to a bracket fabricated on back of truck , it can be adjusted to 8” maybe a little more to either side .

@richardstafford373 3 жыл бұрын

Hey Paul do you own that drag box ? Do ya know where sells them ? It would be very handy for laying the finish layer on a cow road way

@MrPjmullen 3 жыл бұрын

Hi .. yes I own it , I imported it from US a years ago .... it’s a great piece of kit .. will spread 20 ton in 10 / 15 mins with practice and confidence.. depth from 1.5 inch to 6 or 8 inches no issue

@pauldelaney2451 3 жыл бұрын

Hi Richard I have one gor ssle

@pauldelaney2451 3 жыл бұрын

sorry ye Richard I have one for sale

@marcoot5040 Жыл бұрын

@paul mullen can I get a link or help finding this I'm interested in starting asphalt company