BoxO USA tools set

Рет қаралды 4,331

Ralph's Garage

Күн бұрын

Unboxing my new BoxO tool kit and giving my initial thoughts on the kit.
boxousa.com

Пікірлер: 29

@brysonberhorst9795 Жыл бұрын

the reason for the weird sizing and tools is because it’s a dirtbike specific box. the red levers on the top are tire spoons and the small black wrench is for spokes on wheels

@RalphsGarage Жыл бұрын

I know this now, I exchanged to tool set for the metric set, boxo was very good about the exchange

@woody6791 Ай бұрын

@@RalphsGarageshould have read the description of what you bought

@heathyoung4546 Жыл бұрын

Boxo does have Metric 12 point sets and they do not skip sizes. SKU: ECC20301-001R2. you have a motobox designed for motocross, which is why there are some specialty tools (spoke wrench's, axle tools, etc.) Just thought I would let you know. Maybe you can return and get the set more suitable for your needs.

@RalphsGarage Жыл бұрын

Thank you I see that now.

@RalphsGarage 8 ай бұрын

I did exchange this for the Metric kit thank you for letting me know I mistakenly ordered the wrong kit.

@awesomefish100 Жыл бұрын

Pretty stout little box, I purchased the empty 3 drawer so I could customize my own setup. I noticed your second drawer also squeaks when you grab the lip of it. Mine does as well. So far that is my only gripe.

@dustymileroad 8 ай бұрын

Nice little setup in this box/kit. Lots of these packaged sets skip 11mm and 16mm wrenches and sockets. If you get the Master SAE/Metric combo set, since the SAE includes 7/16 and 5/8,, those are "close enough" to 11mm and 16mm in the eyes of the company selling you tools. But the problem with this set you have is it is supposed to be a dedicated Metric only set. Now you are left without those two sizes in your kit. It has always been a peeve of mine in shopping for tool sets when companies do this. They should include all sizes in both the SAE and Metric sizes.

@RalphsGarage 8 ай бұрын

This ended up being the motor kit. I exchanged it for the Metric kit and it doesn't skip sizes.

@Greenwood163 8 ай бұрын

It’s a dirtbike box the red “trim piece tool” with the 32m on the end are tire spoons with a 32m fork tool to open up the front forks. Little black tool is a tire spoke wrench. And I work for a dirtbike store working on all brands and I’ve never seen a 11mm or 16mm that’s prolly the teasing for the skip. Good tools but kinda over priced glad you bought it with 20% off

@robertlynch7855 7 ай бұрын

Specifically for Motocross dirt bikes.

@RalphsGarage 7 ай бұрын

Thanks I ended up exchanging this tool setup for the Metric master set. I ordered the wrong one.

@carlosecabezas 5 ай бұрын

Thank you for the video,.

@wIzKid16100 10 ай бұрын

Is the gray light or darker can’t tell

@yurinator4411 Жыл бұрын

Tool box is marked FRAGILE...

@MidwestToolReview Жыл бұрын

I'm not sure what to think about the BOX lineup...screams Chinese manufactured when I see them, but can't confirm or deny... Also look a little like Duralast ratchets... after further research, I see that they were "designed by a team of American and Taiwanese" designers and proudly manufactured at "Top-Tier" facilities in Taiwan...

@N1IA-4 8 ай бұрын

All tools are getting better no matter what country they're made in. You'd be surprised.

@jeraldclark8086 Жыл бұрын

I think they skip 16mm and 11m because you can substitute 7/16 and 5/8

@RalphsGarage Жыл бұрын

This is all metric

@jeraldclark8086 Жыл бұрын

Ok I missed that part. I do think it's a cost saving measure due to the majority of older mechanics have those two wrenches. I don't like it either especially when you've purchased more high dollar tools and you set everthing up and your missing those two wrenches.

@deltahawk1001 Жыл бұрын

Helicopters also do not really use metric fasteners. They are pretty rare in aviation in general, so this kit isn't going to be very helpful for aviation anyway. Probably better to use this kit at home and get a similar kit in SAE for aircraft.

@RalphsGarage Жыл бұрын

I work on airbus helicopters everything is 12 point metric.

@RalphsGarage Жыл бұрын

Also I ordered the wrong kit this was the moto kit. I've since exchanged it for a 12 point metric kit. I have a video coming on that.

@IMPREZvWRX Жыл бұрын

Is that an AN wrench?

@woody6791 Ай бұрын

Funny cause you are buying something of that price without even looking at the item description. Well it looks like it because you did not even know the wrench sizes and that they belonged in the bottom drawer.

@RalphsGarage Ай бұрын

Yeah I got the wrong tool set they exchanged it for the Metric tool kit for me. That's why I seemed confused about what I got.