Installing and setting up a Boyer Bransden Micro Digital ignition system on a XS650
Пікірлер: 30
@blimeyolriley3 жыл бұрын
NOTE: Set the Rotor mark to the Full Advance mark on the Stator..... ie the far left mark.. NOT the stator F mark as shown in the video.
@alanturner20744 жыл бұрын
Thanks. Much easier to follow than the printed instructions.
@johncooper72424 жыл бұрын
thanks Alan glad it was helpful
@435063 жыл бұрын
The printed instructions might as well not even come with the product! They are terrible
@ronconley18795 жыл бұрын
Hi Bimey.. thanks for posting all your videos on the xs650, I've found them really useful when rebuilding my engine.. Cheers. Rocket
@johncooper72425 жыл бұрын
thanks Rocket its really appreciated when I get some positive feedback . Glad they were helpful. I have a more current channel that I use now at kzfaq.info/get/bejne/rdJ3pNdlm93Nj2g.html John Cooper
@johncooper72425 жыл бұрын
hey Rocket thank you for taking the trouble to thank me I can't tell you how much I appreciate that . Its a lot of work producing videos but if it helps one person its worthwhile. I hope you get a chance to ride your bike this summer. Johnnyxs
@rotax5055 ай бұрын
Definitely the mark on the far left
@johncooper72425 ай бұрын
no s*** Sherlock ...........I think I pointed out 10 years ago 1st post below
@dreamquestawn23922 жыл бұрын
Super helpful, thanks
@johncooper7242 Жыл бұрын
thank you for your positive feedback its much appreciated.
@stuartporch67167 жыл бұрын
great video really help thanks
@blimeyolriley7 жыл бұрын
thank you Stuart glad it was some help
@paprecisiontv16355 жыл бұрын
So your setting the engine to TDC then lining the mark on the rotor up with the full advance mark on the stator and making sure that you can see a white dot from one of your magnets (where the points used to be) through the timing slot on the new igntion plate? Is this correct
@changchung7 жыл бұрын
thanks you very much for share this video
@blimeyolriley7 жыл бұрын
thank you for your feedback it means a lot to know it has helped someone.
@goldcountrystorage5 жыл бұрын
Thank you, cheers!
@johncooper72425 жыл бұрын
thanks Mick apologies for showing the wrong advance mark in my video. it should be the furthest advance mark before TDC not the closest.
@goldcountrystorage5 жыл бұрын
I have a PMA so the stock advance marks aren't there. I used a degree wheel to set at 35* according to what I've found on the "net. As Boyer says, time at FULL advance.
@mrkhokon88135 жыл бұрын
how to set Pick-up coil with the Magnet ignation timing ??
@SuperDonDomi6 жыл бұрын
i bought the same ! cant wait to have it and instal it ! thanks for the video, and YES what a poor diagram not even pictures
@blimeyolriley6 жыл бұрын
you'll love it.... spot on ignition at all throttle positions. Don't forget to watch out for my error in the video. You need to set the Boyer up to max advance which is the mark furthest from TDC not closest as I said in my vid. Post a vid when you get it running. JohnnyXS
@johncooper72426 жыл бұрын
great choice you'll not regret it. Don't forget to watch out for the full advance mark on the stator . I made a mistake in my video . The correct full advance mark is detailed in the text below but ping me if you are not sure. Stick a video up when you get it running
@SuperDonDomi6 жыл бұрын
it starts im gonne post the video now
@SuperDonDomi6 жыл бұрын
it starts posting the vid now
@blimeyolriley10 жыл бұрын
Hi, I installed the same boyer box and the full advance mark is the line on the left at the end of the plate not the one that you are pointing in the video. Regards. Jacques
@yves35607 жыл бұрын
Absolutely correct..
@blimeyolriley10 жыл бұрын
Jaques thank you for your comment. You are quite correct ! In the video I am pointing to a partial Advance mark at Idle . Thats the problem with trying to view things through a camera whilst recording narration if you are not paying attention. The full Advance mark is the very first line that the mark on the Rotor comes to when rotating the rotor (crankshaft) anti-clockwise ie the line to the far left on the Stator Thanks for correcting me..
@russturner15703 жыл бұрын
The motor was NOT set at full advance on the compression stroke ( note at end of video the inlet tappet began opening the valve when tightening the rod nut).This motor will not start/run,probably result in a massive backfire!
@johncooper72423 жыл бұрын
you idiot ! this motor started first time and has been running perfectly for 8 years. If you had bothered to read the comments and text and watch the other videos you would have known that