Turn the board upside down and put the trucks on the other side, that gives you more ground clearance

Nigel’s reaction to Aaron driving back with the wood sticking 10 feet out of the back 😂😂

Can we please get a "shopping with Aaron" or "braille goes shopping" series? You guys are a riot in stores. You never know exactly what you want or need, but when you find it, mwah, chefs kiss, its priceless.

What if we put the wheels on the opposite side? I guess the board will feel stable too

The Guys: "Kickflip it!" The Kid: **tries** Absolute gold, best part of the entire video.

The best Idea of a long time, how could no one think of this fantastic idea?🔥🔥

Chaos, but reaching non skaters and inspiring them to skate because of its absolute hilarious-ness! Like Aaron intended.

i wanna see two people riding but with both people pushing. i wonder if u can get going fast. tandem skateboard would be really neat

Glad to see Aaron's transition skills in today's video. Always a treat to see a master at work.

I used to watch you guys years ago, then life got busy. It makes me happy that you guys are still goofing around with board ideas! keep having a blast.

As dangerous as the home depot run was, this is ironically the most careful I've ever seen Aaron. He made sure the ends were straight, and used washers! There is hope!

these I are the kind of videos I love! Making a really dumb idea come true. After couple of minutes watching I'm getting more and more interested about the end result! big love

Used to be a big fan of this channel when I was like 11 , haven’t skated since and just recently picked a board up and plan on skating again , love the channel , thanks for bringing me back to skating

It makes me happy to know Aaron uses his blinkers (turn indicators/ indicator lights/turn signals)

Seeing Nigel’s reaction to all this literally just makes my day 😂🤘 cheers fellas

Idea💡Screw in metal rails on both edges!!! Not only will it add rigidity but also JD can frontside air to 50-50 from the quarter pipe on to the longboard as Aaron does a rock n roll!!!

Shouldn't the trucks be on the other side so it's further off the ground?

Videos like these are so ridiculous but so entertaining, although been loving the more skate focused videos too!

Khayri is awesome every time he's on. Keep that kid coming around!

Suggestions? Def add clearance... Flip the trucks onto the "top" ride it "upside down". Make it more rigid, Add thin strips of wood (1/2" 3/4") perpendicular to the top of the deck, running parallel with the length of the board. Run a center line on the board & ends, match them up with the lines on the hardware to make sure it's running true. You also could possibly pre warp the board so that it is arched in the center. Soak board in water, let sit for a few hrs, Put on half pipe with weight, or clamps to get the slight bow, or just look for one of the several you may find at HD. lol. Great & fun video, thanks for all that you do.

That thumbnail is legendary! Can tell this gonna be a great video

Where’s jd when we need him!?!!?

Just remembered that I have a skateboard I bought awhile ago and you guys have convinced me to start riding again! Hopefully gonna just get more used to it this summer and do some street stuff

Glad you guys are popping into my recs again.

Every braille episode is and epic one. Yall have the best jobs in the world. Who doesn't like to have fun while they work and goof off. And I don't really watch any other skateboarding channel on youtube to be honest. Cause they're just not as fun for me. Yall are so CREATIVE!😊

Aaron needs a truck 😂😂

You need to reduce the friction on the underside. Wax it up, and maybe put three skid plates on the places it gets the most wear, in the middle where it sags and at the ends where it scrapes ledges. If you're feeling really handy, make sure those plates are flush with the wood so they don't catch on ledges.

this reminds me of the You Make It We Skate It Series. thanks for uploading this Aaron.

Liked the editing and longer format in this video. Feels like an episode of a tv show.

That looks like so much fun in the vert ramp! I would try to tame that beast.

Flip the board over and put trucks on other side of template - with the thickness of the template, you already have most of the riser you may need already -super simple fix - stay awesome out there Braille Team!!

That was a really fun video to watch!

Try mounting the trucks on the otherside of the board for max ground clearance! And maybe throw some ALL Terrain wheels on it and take it off road!

this is crazy and funny board to see Braille

Nigels reaction to aaron going to home depot instead of across the street was hilarious😂😂. And the show you guys were talking about was called extreme makeover home edition

one of the best videos in a long time

Love braille been subbed for as long as I can remember y’all should make a vid/compilation of braille’s worst falls.

glad to see this video is doing so well!

Khayri at 11:37 rollin in on that drift trike like he owns the place 🤣 Better watch out AK, somebody's has their eye on that 7-ply golden throne my guy!

11:02 the look on Deriks face nearly killed me 😩😂 Also fun fact, pausing 11:03 makes Derik and Nigel look like evil masterminds 🤣

You know that’s almost as long as- nah just messin’ with ya guys that’s cool asf bro 😂 love you guys ❤️‍🔥

I love Braille!!

When you guys said centering the board that’s a 1/4 larger so it is only 1/8 on both sides. I was so proud of you guys

when gabe said we dont have anything to tie it down with . i died thnking you could go to homedepot. then Nigel!!! hahahaha best vid ever

This is one of the best ones you've made

watching you guys sketchily load that wood into the prius made me so nostalgic for when my friends and I would build practice rails in highschool

Need to try putting the end wooden pieces on the underside of the 8 footer. That would get the deck a little higher so it wouldn't drag as much. Maybe

Would have been worst if they clipped it from the side and it hit into one of you 😬 love braille and all the stress you put me through 🤣👌 glad it all worked out 👏 loved the vert ramp bit, almost like a carnival ride once you get it going and jump on.

Watching you guys at Home Depot is like watching me on a skateboard lol

I am a Braille Army Plus Memeber!! And its awesome!!

OK.see. This /These are the reasons we luvLuvLuV Braille & their ideas /creativity 🎉🎉🎉

Might I recommend small roller pins type thing for the middle so it rolls when it scratches floor

To prevent it from touching the ground you can bend it in the middle. like it's an arch. To do so, you can wet it up with a lot of super hot water, bend it, hold the position until it's dry. You may have to use something with several attachment points to hold the curve and not only one (so it looks more like an upside down U and not an upside down V. OR, wasn't it possible to invert the position of the attachment piece and the long wood. (from bottom to top : trucks - tail or front piece - superlongwood) Super fun

Use steam (water and heat and maybe like big towels) to shape the wood. Since the wood wants to arch down because of the weight on it give it an arch up to counteract it and also give it a chance of clearing obstacles in the middle.

Lov the road trips!!🤌🏼😂🤣😂🤣😂🤣

He gave a full attempt on that kickflip. I spit my water out my nose that was so funny XD

I was watching a video where Gabe was talking about playing skate through a wrong number text, and it gave me an idea. A worldwide game of skate, where you have to submit the footage of a landed trick before the deadline(e.g. 30 min for each set). I think multiple tries would lead to people pulling off some insane tricks and pushing boundaries, making it difficult in a way that’s different from a normal game of skate.

Now that is the definition of a real long board.

LOVED IT

the way he says dreeeaaammsss" 😂😂 6:43

great video concept

this channel is restoring faith in humanity dude

Top banter! 😂

My favorite kind of deck a drop down!

Put angle iron on the sides of the 2×8 and it should prevent so much slack.

I swear I love Arron so much

Duuude .. at the 7:40 mark the only thing this video has left me thinking is what if somebody ran into the end of those boards sticking out of your prius, it would have drove it clean through the dash and it would have probably shattered the air intake on top of the engine. You guys are nutz! Lol

I love how Gabe has to gently explain to Aaron how lumber and measuring works.

The 10 ft of wood sticking out the back, that would totally be me, just winging it and hoping for thr best 😂🙏🏻

Those vert clips were strangely satisfying.

You gotta find a board that is strongly bowed and put the bow upwards in the middle so when weight is on the board it flattens out. You won't need risers then and might be able to fit 4 people on it!

What if you had one person on each side of the board in the vert ramp pumping the ramp?

Would it work to flip it upside down and put the trucks on it that way? That way you have more space between the middle and the ground

Petition to turn Braille Army channel into Braille After Dark where the guys dont have to censor themselves and they just skate. Invite homies to come skate or go to other parks

A buddy of mine did this in highschool as well 😂 i had some old trucks that were busted and i couldnt get the wheels off so i gave them to him and he bolted them to a longass plank and carried it around school

That thumbnail. 🤩 You definitely need to nail a short rail onto the longboard.

During the assembly, has really noone thought about putting the plank ontop of the tail and nose, instead of below? So the plan is higher up and has more space to bend naturally, instead of using rizers

I love your videos!

Braille! We can’t handle much more! Skateboarding was never meant to go so hard! 😭😂

Got the sneek peak of this video in the live stream like 2 weeks ago lol

Bro tryin to do peace sign ended up stickin the finger😂

I made my own 6 foot longboard a long time ago carved a deck shape from some strong plywood set it up with Indy 215s and Xtreme 99mm street slicks took to get moving took some mussel ... stopping took some tread

When Aaron said “ we arrived at the greatest store in the whole world” i thought he was gonna say BUNNINGS WAREHOUSE 😂

FYI '2x' lumber is the dimension before its milled from rough lumber. So a '2x8' is actually 1.5" x 7.25". Just google lumber 'nominal vs actual dimensions' to look up a chart.

Drop in on the loooong board! That’s all i wanna see now

Gabe.... 23:07, I had the same "jump on it!" outburst....mine just subbed "it" with "that muhfuhg**"

That thing was like one of those Viking ship carnival rides when it was on the vert ramp! 😂

Get some bearing casters and put a few on the bottom. Maybe put the trucks on the other side to get more height.

this would be a cool thing for beginners: is more secure to go on a ramp with that and slowly getting them the feel and courage to go with a regular board

I need the 16ft board on the vert ramp. 😁 MAKE👏IT👏HAPPEN👏

That 'cruzing' pun works as a triple! Namely, to keep making puns!

Aaron :Be Honest Do It Look Cool Or Not ❓ Gabe : Nah ‼️😂😂😂😂

Best quote from this video “one man, 8 feet of wood”

Flip it upside down and put trucks on the other side and also put a third truck in the middle to support the middle weight, could even use the longer board that way

did sth similar as teen... u channel made out of mild steel. open side of the channel facing the floor and the channel wide enough for the trucks. drilled some holes, screwed 3 decks on and had a lot of fun :D

please try the vert ramp with this longboard again with two of you guys standing on each side and pump on upsides of the ramp like your each a leg on a regular board

"so slow" ...lol so fun\ thanks gabe

extreme home makeover lmao! Move that bus!

Ripstik + Apple Wheels. Patiently waiting

Funny idea😂 I bet it would work way better if you add another set of trucks and wheels in the center of the board that way the middle of the board won't drag👌🤙🫵👍