BRAKE FIX - Logitech G920 Brake Pedal Mod!

Рет қаралды 106,339

7 жыл бұрын

Do you suffer from Stiff brake syndrome? This mod will show you how to get that dang piece of rubber out of your Logitech G920 Racing Wheel.
This is an upload from my Gaming channel, I uploaded this long before I had the idea for this new channel:) So I'm just putting it where it belongs
►BUY the Logitech G920 Racing Wheel: amzn.to/2dhjgoD
►►Leave a tip! | Like or Dislike the video. | Comment and tell me why! | Subscribe if you loved it!
►Check out my Gaming Channel: / @beeeyeee
--------------------------------SUPPORT THE CHANNEL----------------------------------
► Buy stuff from Amazon: amzn.to/26F10Md
► Donate so I can play more games!: Paypal.me/Beeeyeee/20
► Subscribe! / @beeeyeee
-------------------------------------------------INFO-------------------------------------------------
► LIVESTREAMS | I livestream on Twitch and Beam Every Friday @7pm MST. I also stream whenever else I have time, so turn on Notifications!
▷ / beeeyeee
▷Beam.pro/Beeeyeee
► TWITTER | ▷ / itsbeeeyeee | @ItsBeeeyeee
► MY PC BUILD:
▷ • EPIC $4,000 PC - 4K Ga... -▷pcpartpicker.com/list/mnGTCy
►MY SETUP: ▷ • My Hardware Setup - Yo...
-----------------------------------------LEGAL JARGIN-----------------------------------------
Big Bird's Disease by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: www.twinmusicom.org/

Пікірлер: 226

@jaystepher 5 жыл бұрын

nice job! no more smashing down the brake just to stop lol

@kroneyt1493 4 жыл бұрын

It wasn't very soft and squishy rubber in my brake pedal. It was so bad that I really had to adjust how I drove to compensate for the real lack of an actual brake pedal that I had. I was actually pushing the pedals away from me trying to stomp on it, it made driving less fun.

@zyeehaw9018 2 жыл бұрын

yeah mine was basically solid plastic, after some brake distance testing it was about 25-30% of the actual potential braking power

@andreasthiemke9520 5 ай бұрын

Also even if you managed to get enough grip under the pedals that they wouldn't get pushed away your chair would just move back instead. Feels like they put it in to make it so that people removed it and voided their warranty

@StalePhish 6 жыл бұрын

From one stale fish to another, thanks! I'll consider doing this right away. Just got my G920 today and was covered fused about why I wasn't able to brake as much as I felt like I should've

@crismesablazquez8830 4 жыл бұрын

Mate... A lot lot lot LOT LOT LOT of thanks about this from the bottom of my heart. I stopped playing driving games because I couldn't play them correctly... Now I'm back!!!

@paulwubben7506 4 жыл бұрын

A tool list at the beginning of the video would be hugely beneficial. I made 4 separate trips to the garage. PS the nut is a 10mm.

@wall7103 4 жыл бұрын

Also a 3/8th

@Skippy-id9yt 3 жыл бұрын

@@wall7103 not the same

@wall7103 3 жыл бұрын

@@Skippy-id9yt worked for me.

@Skippy-id9yt 3 жыл бұрын

@@wall7103 happy for you.... but still different size , you can thread the hex screw/bolt using the wrong type (imperial vs metric ) trust me i use them every day at work and it matters when your doing things up tight ....but be a dick ...enjoy

@wall7103 3 жыл бұрын

@@Skippy-id9yt I'm not a NASA engineer. The only tools I have available to me are apart of my small imperial tool kit. Just trying to save people a Google search.

@user-wx6ph8fs9r 2 жыл бұрын

There is no requirement to remove the black screws like on the video. These hold the pedals in place and if you want them all to fall all over the place then follow the video. Remove the silver screws and the pedal covers then just the black screws for the brake pedal then crack on.

@marcco954 5 жыл бұрын

I just bought G929 and seriously... I needed to remove the rubber. I know how the track car brake feels like but this... is just too much. It's far from heavy brake pedal. It's more of like something stuck under the pedal. BTW Your video helped me a lot. Thanks!

@hardworkingbee5406 3 жыл бұрын

I never need stand on real car pedal to stop it. It is poor design.

@che17grr 3 жыл бұрын

Bro thank you so much! Everywhere I looked I was getting so discouraged by "replace spring with new upgrade" and Yada Yada everywhere else but you made it so easy and simple. I haven't tried it out yet but I'm about to, and I can already tell by pressing the brakes they are MUCH much lighter yet still have a little bit more resistance than the clutch. Have a follow mate keep it up ✊

@xyuop586 6 жыл бұрын

Really good video and instructions. My brakes now work as they should have from the manufacturer.

@Rorosauras 3 жыл бұрын

Bro this saved me from using the clutch pedal to break( rebinding it)

@PsychoticCore 3 жыл бұрын

Lmao I did the same thing

@Aridity 2 жыл бұрын

Warning all you need is a 2.5 Allen key on the back of the pedal take the two bolts off of the brake and remove the rubber it’s way easier. This method usually is way shorter so I’m trying to help you guys.

@jvdj4912 Жыл бұрын

I forgot this. And did the first part. Only to be met with taking of pedal would be smarter to have been done first. When i look at pedal i remember that only 2 freaking screws ate needed to be removed and ALL of this would been skipped -.-

@Stevefromthebronx Жыл бұрын

@@jvdj4912 bruh where am i gonna find a dumb ass allen key bruh

@RICHUNCLEPENNYBAGS77 8 ай бұрын

@@Stevefromthebronx any hardware store

@RICHUNCLEPENNYBAGS77 8 ай бұрын

The problem with this, I would say, having tried, is putting the brake back together is quite difficult.

@jeeploggernz2289 5 жыл бұрын

I took out bump stop on brake, cut in half and put back in, swap clutch spring for accelerator spring, alot better

@kaandinc4070 4 жыл бұрын

Nice done! I've done the exact same things and much difference!

@Gcode6969_TTV 4 жыл бұрын

The clutch spring hmm

@jeeploggernz2289 4 жыл бұрын

@@Gcode6969_TTV hmm

@BrandoDrum 3 жыл бұрын

yeah, I'm gonna do all of that but I will leave the bump stop completely out.

@sleepywagonn 3 жыл бұрын

Did you try the brake pedal with no bump thingy?

@colin2623 3 жыл бұрын

Thanks for the video, I'd just been using the clutch pedal as a braking pedal instead untill now

@andrewspark5909 Жыл бұрын

Thanks for the video. I needed that tip on unloading the pin by pulling back the spring. Mine is fixed. The brake pedal still feels more resistance than the accelerator; which feels just right to me. Thanks again.

@clairehaines4851 7 жыл бұрын

Thanks so much for your great video!!! I bought this steering wheel for my son and he has been struggling with the brake pedal ever since. In fact it stopped him from wanting to use it. Your video has been a great help and maybe we will get the courage to try your modification. Thanks again!

@Beeeyeee 7 жыл бұрын

Claire Haines great to hear! This should help a lot! It's really easy to do:)

@josephstalin1223 4 жыл бұрын

How did this turn out?

@TheBOR1S 6 жыл бұрын

I liked this vid so much I subbed. Thanks

@Techrodd 4 жыл бұрын

Great tutorial, helped me out a bunch. Nice, organized and detailed. Keep it up, much thanks

@josephstalin1223 4 жыл бұрын

Did it fix the issue? Are you having any other issues with the brake petal since doing this?

@IdentiteettiWarkaus 5 жыл бұрын

Thanks! very good and clear tutorial. 5/5

@rnga_hairz8256 2 жыл бұрын

When I first tried it I literally binded my clutch as a brake because the brake petal was so stiff. And my desk has a lip on the edge where the wheel clips on and when I would push the brake I would literally pull the wheel off aswell but I’ve just taken the thing out super simple super easy thank you works perfectly now

@MadgeHD 5 жыл бұрын

very good tutorial easy to follow!!

@kaandinc4070 4 жыл бұрын

Thanks for this really guiding video!

@jhtongamer3151 3 жыл бұрын

Hey bro you know the plastic bit on the paddle do you need it ?

@colton7212 4 жыл бұрын

WORKS GREAT!! THANKS A LOT

@joelelwin 2 жыл бұрын

Our's felt like a rock. Now it feels great. Cheers

@IsM1ku Жыл бұрын

For anyone watching this, you only really need to take off the brake pedal from the top and just take out the spring and the rubber and just put the spring back, it's a bit fiddly but much better than OPENING UP THE WHOLE ASSEMBLY. There's like a 3 minute video about it by some British guy, yes he did the whole thing in a couple of minutes

@bradclarke3700 2 жыл бұрын

Great vid! I did this mod with my son's wheel set and he is very happy! Before this, he had reached the point that he hated the set because the braking was so awful. Thanks! I can't imagine why Logitech put that thing in there - it does not feel like the brakes of any of the multitude of real cars I've driven. Much better now. Thanks again.

@zyeehaw9018 2 жыл бұрын

yeah mine was horrifically bad before this mod, after some brake distance testing it was about 25-30% of the actual potential braking power with the rubber in

@prashantaaryal1624 6 ай бұрын

I am afraid if i messed up with my Logitech while doing this🥺

@corzabourne2101 6 жыл бұрын

aslo using the clutch spring for the accelerator made a big difference for me

@richardconey 2 жыл бұрын

worked a treat, thanks dude

@carterodell2902 3 жыл бұрын

Thanks, haven't used my G920 much just because of the brake pedal just got a PC so i decided to check it out and get software. This feels so much better and i appreciate this video even though it is almost 4 years old.LOL

@wesleykite7011 3 жыл бұрын

does your pedal wobble?

@killgore392 4 жыл бұрын

Thank you so much!!!!!! This helped me so much

@justice7ca245 6 жыл бұрын

This video helped me a ton, really fixed my brake pedal. I'm not sure a stopper is even needed if you keep the spring

@mikedeboer3565 6 жыл бұрын

David Smith is there still some resistence of the brake? I'm considering doing this mod for myself.

@killgore392 4 жыл бұрын

Yes it still has resistance I used to own the g27 and those pedals were fine Logitech put that rubber piece there for “realistic” feel but it just feels like you can’t brake all the way. After removing the stopper if you put the spring back right it feels good and you can brake 100% without putting your foot through the floor. Or even cutting the rubber block down would help

@MusicMath123 3 ай бұрын

you could do this from upper side. a lot less screws to remove.

@mandothesavage1018 3 жыл бұрын

This took me an hour but it was sooooo worth it

@bentley6412 3 жыл бұрын

Just followed step by step, brilliant mate, will let you know how the results are ASAP

@bentley6412 3 жыл бұрын

Mate just done 5 laps of Hungary on F1 2020 and man the difference is night and day, you have made my gameplay 500x better, can't thank you enough

@Delimon007 5 жыл бұрын

I don't get why the stopper is even there, I was testing it on GT sport where you can't change the settings like you can on PC and the stopper was at 60-65% brake pressure before you have to seriously mash down on the brakes to get to 100%. If they were going it use a stopper it should have been a lot smaller.

@PostWarPremium 3 жыл бұрын

Thanks man, so much better now!

@TheOneDI 3 жыл бұрын

I just bought this wheel, and hate the brake, need to do this mod, im using clutch as brake right now, on F1

@zackgottlich6489 Жыл бұрын

6 years later my man is still doing God's work

@Widnezz 2 жыл бұрын

great video but i did find that you don't actually have to remove the peddle, you can easily remove the rubber bit white the peddle is still on there!

@cupofmozzarella 2 жыл бұрын

Good vid. The rubber itself isn't bad but when you race with just a desk chair you either go backwards whenever you brake or almost take the wheel off. You lose a bit of precision in braking but that's ok for now.

@davidmedina5536 4 жыл бұрын

I thought my pedals were faulty but I see everybody is like that lol

@justindoll2536 2 жыл бұрын

Thanks man. Totally made this a piece of cake I was incredibly irritated about this 😅

@michaelg8008 5 жыл бұрын

Thanks for the video! Just did it to mine with success :D

@Airtrooper719 4 жыл бұрын

Cool video but I like the stock feel. Feels alot like my real truck and i play eurotruck and American truck with the wheel sometimes.

@AmazingFrenchman 4 жыл бұрын

I have two G920 here that cannot be pushed down AT ALL, they stop at 15%

@orangeinfotainment620 5 ай бұрын

Thank you man

@michaelalessandri1631 5 жыл бұрын

Thanks, nice video!

@barrad0s 7 жыл бұрын

Nice video bud. It's funny to see you trying to loosen the screw turning right and holding that adjustable like that lol. But anyway, nice solution and thanks for posting it!

@svkllxr2058 2 жыл бұрын

Just got this wheel for Christmas and I can barely stop I’ll definitely do this ty

@mattcarroll4926 2 жыл бұрын

Same

@VICTOR360TV 2 жыл бұрын

Thank you! works perfect now

@colesonmartens8039 3 жыл бұрын

Hey man. I couldn’t brake at all before I remove the stopper. Now I have 100% brakes. Thank you

@zyeehaw9018 2 жыл бұрын

yea same here, after some brake distance testing it was about 25-30% of the actual potential braking power before this mod

@Andrew2004 2 жыл бұрын

@@zyeehaw9018 Is it stiff still,like could you tell when the wheels are about to lock?

@zyeehaw9018 2 жыл бұрын

@@Andrew2004 yeah there is still some stiffness, main thing to consider is if you want the warranty or not

@wall7103 4 жыл бұрын

My rubber was way harder than that. Take that as you will.

@Nemesisrooster 4 жыл бұрын

@Subaru Gerbil, same here. Mine was more like a solid block and far from squishy

@carscopscawd6400 2 жыл бұрын

Thanks for this!

@Grandmaster-Kush 3 жыл бұрын

My break pedal is squeaking any fix to this?

@iwasadeum 3 жыл бұрын

My pedal has about 1/5th of the movement you just showed 😑 definitely going to look for an upgrade.

@13swims 2 жыл бұрын

Hi I’m wondering if I take out the rubber block if it’ll still work on pc, read a comment somewhere saying it wouldn’t so I just wanna make sure! Thanks

@IsM1ku Жыл бұрын

That comment is lying, they probably just broke something. I did it (using an easier method) and WOW is it so much better

@pittlestevomock3971 7 жыл бұрын

Does this void the warranty for the entire wheel or just the pedal part?

@quarans08 Жыл бұрын

entire wheel most likely

@amazinjason4959 3 жыл бұрын

this is very helpful,but do you think you can cut the little rubber piece to still have some pressure?

@ReggaeRomi Жыл бұрын

What you can do is as add your own rubber, literally a piece of rubber that you would use to rub out stencil. Put it next to the original black piece of rubber and trim it accordingly.

@Shadow_of_STLKR 6 жыл бұрын

This rubber should simulate racing hydraulic brakes which first touch disks and then it breaks but for just driving its most annoying

@dangernoodle23101 2 жыл бұрын

Okay so sure my neck is aching and junk but my brakes finally go 100%. Thank you!

@stephan1387 5 жыл бұрын

what about cutting the rubber in half, and put only one piece back in? does it make it a little more smooth, while not loosing the "real" brake feeling?

@BabyMandingo 5 жыл бұрын

Belarm i would like to know this as well im tired of my foot hurting from heel toe shifting

@tonim9029 4 жыл бұрын

Thank you

@petr663 21 күн бұрын

work..... thanks

@thunderstrucks3691 6 жыл бұрын

What about the deadzone

@dilligafpb69 2 жыл бұрын

Just for future people doing this, the black screws you can leave. Maybe take the middle 4 screws out if you need to take the brake pedal right out but the other 8 you can leave. Will just save you time unscrewing those you don’t need to.

@kryptex5920 5 жыл бұрын

Thanks a lot

@Bartalosko 4 жыл бұрын

thank you

@wrk101 4 жыл бұрын

Thanks a lot for your help! Problem solved!

@abdel6ix9ine19 6 жыл бұрын

is there still some resistence of the brake? I'm considering doing this mod for myself.

@killgore392 4 жыл бұрын

Abdel 6ix9ine yes the spring remains and feels better than that stupid rubber brick

@sethmisaelhernandez5902 4 жыл бұрын

@@killgore392 im gonna mod mine too!

@bounden8789 2 жыл бұрын

Is there a way that I can use the clutch instead of the brake? I usually just go into the settings and change the brake deadzone, but assetto corsa doesn't have that. I don't really want to risk it and modify my brake pedal. Is there any way I can do this on a Xbox one, like is there any settings or a g hub or something like that?

@mrwozowski6297 2 жыл бұрын

Breaking the pedals is really hard to do. Just follow the video and you will easily fix your problem.

@StormAries 5 ай бұрын

you dont need to take it apart from underneath. the pedals on the side hhave an allan key screw x2 you can take off and get to the rubber

@vladislavvasilev9774 4 ай бұрын

Do you know if its good idea to cut the rubber, and put half of it in the spring again bcs i dont like when its too soft and too hard 😅

@StormAries 4 ай бұрын

@@vladislavvasilev9774 definitely the best option imo

@miguelnavarro566 2 жыл бұрын

Yo también igual dice muy bien.. mucho gracias

@UpMostt 4 жыл бұрын

wow its night and day difference. only took like 10mins thank you

@josephstalin1223 4 жыл бұрын

Did it fix the issue? Are you having any other issues with the brake petal since doing this?

@duck7146 5 жыл бұрын

Yeah it's good but it registers that I'm touching the brake when I'm not And it's 0.4% of braking but in fh4 that doesn't matter but fh3 it almost stops it

@alexismenes7550 4 жыл бұрын

Ryan Fergerson put some deadzone

@macstar8317 2 жыл бұрын

You can remove the rubber block without removing the pedal from the base.

@theswaff699 3 жыл бұрын

On the 923 it's a different spring from the other two

@madjedi2235 6 жыл бұрын

How do they know to void your warranty? Couldn’t you just take it apart and put the piece of rubber back in if it breaks or are there warranty void stickers somewhere?

@Beeeyeee 6 жыл бұрын

madjedi22 i found out it actually doesn’t break your warranty

@madjedi2235 6 жыл бұрын

Does it not void your warranty or is it just hard for them to tell?

@olly 4 жыл бұрын

What is the resistance like after you take the rubber stopper out? Is it like the clutch, or still harder?

@xboxice2005 4 жыл бұрын

Can I swap brake with clutch to the far left I don't use clutch 🤔

@aeybes 4 жыл бұрын

Just change bindings in games

@robloxfan4271 4 жыл бұрын

cant do it as i dont want to void my warrenty

@chrisbaston2605 4 жыл бұрын

Thanks for uploading this video. F1 2020 was unplayable with the wheel and your adjustment has solved the braking problem perfectly. And your video was nice and easy to follow (as someone who is not very good at this kind of thing). My son is very happy!

@BassManM4tt 2 жыл бұрын

Gonna do this tonight, what game are you playing at the end of the video?

@pavelno.6121 2 жыл бұрын

I recommend take back half of rubber (eliminate dead zone and pedal has 100% functional zone)

@m-h1217 4 жыл бұрын

The rubber in my break pedal is so hard it isn't even possible to push it down closely to what you are supposed to. The games don't even receive an input, it's that bad.

@crazyo1985 2 жыл бұрын

Wow thanks bro

@BenWillock 2 жыл бұрын

Thanks, I have no idea why they added the rubber, the brake feels fine without it.

@christiantaylor1495 2 жыл бұрын

where is the "you will need" part of the video? I just want to know what screwdriver I need, and I am too frustrated to focus and watch the whole video

@christiantaylor1495 2 жыл бұрын

1:49 is a 1 Philip different from a "number 1"?

@jamesc1199 4 жыл бұрын

600th subscriber 😁

@Toutvids 6 жыл бұрын

Calibrate the pedal, that's all you have to do. Oh, and yes they programmed a steeper curve in the software to compensate for the rubber.

@mxnuuel4008 5 жыл бұрын

how would one calibrate the pedal?

@Taser1-1 5 жыл бұрын

Mxnuuel who knows

@ALLVARLiGT 4 жыл бұрын

Great idea, doesn't work. Not for me anyway, but i definitely suggest people try calibrating and fiddling with settings before moving on to the videos method. Using both the driver tool for this wheel and maxing out sensitivity and deadzones in the several games i tested, i still couldnt reach 100% breaking power because the button simply couldn't press down fully, atleast not without pushing a hole through the floor.

@serjjomiru 4 жыл бұрын

@@ALLVARLiGT in Asseto Corsa settings for Xbox One you can not calibrate brake.. So this is the best solution.

@stevenlarson3316 3 жыл бұрын

@@mxnuuel4008 Kind of an old post, but maybe others can benefit as well. Go to "Game Controllers" menu in windows. Type it in the search bar. When that comes up go to your g920 properties, then settings and calibrate it. Then it will work without having to mess with in game settings. Or go watch this video if you need more assistance. kzfaq.info/get/bejne/g61jg5pns86lqJ8.html I did this at first but just ended up taking the rubber piece out and recalibrating it. The break spring is stronger than the clutch or gas pedals so it's not like it bottoms out anyways. I feel like the idea to put a rubber stop in there somehow went through at the last minute without proper testing.

@erikaserikas8239 Жыл бұрын

tysm

@keyboardwarrior3034 3 жыл бұрын

my pedals dont even work after this they also stop the wheel from turning on

@SedrikGSX 5 жыл бұрын

Somebody knows what are those spikes on the top part? I can't figure it out

@wesol4072 5 жыл бұрын

For a carpet

@SedrikGSX 5 жыл бұрын

@@wesol4072 oh right, that make sense hahaha thanks!

@dmr4507 4 ай бұрын

tank you xx

@GamerzShit 3 жыл бұрын

The rubber in my pedal is literally unpressable. I can put all my force on it and I can't make it reach the bottom/press is 100%. It was a unit that was on sale, it can't be normal that it is this stiff

@7o177 6 жыл бұрын

cheers man i got this for my kids to muck round with but stock its so hard for me to push the brakes the kids didnt stand a chance.

@jeffreybower5959 Жыл бұрын

its a mystery to why they put the rubber block inside and there is a simpler way to get it!!! also the brake spring seems to be more stiff as is and the gas spring is easy tension!! i need to find the springs with even tension as the clutch!! i use allen wrenches and a flat head screwdriver without removing the bottom!!