Brake lights stay on? How to fix it yourself!

No video

Brake lights stay on? How to fix it yourself!

Рет қаралды 1,109,597

Күн бұрын

If your brake lights won't turn off, here's a quick fix for your problem. Brake light sensors are an inexpensive part that may need adjusted, as you may find out when your lights won't turn off.

Пікірлер: 311

@jacktownston839 Жыл бұрын

6 years later and your vid is still helping people -- you just saved me many hours (and spared me from probably being totally overcharged to simply change out the piece, which I learned is called a "break light switch stopper" and costs like 75 cents!! [mine broke and fell off, causing the problem; wasn't a bolt-tightening issue] but your vid identified the prob anyway). Thanks, sir!

@Mark-ui4fv 8 ай бұрын

@richcorridore904 4 жыл бұрын

Wow, this video was spot on! Great analogy with the two bolts. When I got under the dash, I found the two bolts backed away from each other. I tightened them both after making sure the white plunger switch was in a workable position and the problem was solved. We saved the cost of a visit to the service center and possibly many tow truck trips from a dead battery. Thanks very much! - RC

@mikhailmcdaniel9473 3 жыл бұрын

@bulalaphathutshedzowebster997 Жыл бұрын

@kristinaavila8116 3 жыл бұрын

i’m jus a 16 yr old girl and i have no idea WHAT i did under my car BUT I SOMEHOW TURNED INTO AN ENGINEER AND FIXED MY CAR YAYAYAYAYYA

@garnetnard4284 3 жыл бұрын

This is such a great comment. Congrats young lady.

@miltonejuarez2828 2 жыл бұрын

@@garnetnard4284 Llm. L po

@brionywilliams3447 2 жыл бұрын

Girl I’m 20 and know nothing about cars I can’t do it 🥺🥺🥺🥺i understand what I need to do but I can’t reach those parts in my car

@jazzycat2990 2 жыл бұрын

@@brionywilliams3447 gorl im 22 i was so confused too but it was just the yellow peice that fell, I pushed the seat back and held the peddle down to put it back

@mcthurman1880 3 жыл бұрын

So amazed at the negative comments. You took your time to explain the repair. Even if it doesn't work for me, just pass on and forget it. I think you did a great job. Thanks for sharing

@mattatlfan 3 жыл бұрын

Thank you for the kind words. KZfaq’s comment section is 90% depravity so I’ve learned not to check very often

@russellmuscleatl 2 жыл бұрын

I agree, he did a great job

@zechariahross1444 Жыл бұрын

The video is out of focus the whole time.

@macdaddygeek 7 жыл бұрын

Thank you for posting this. The video quality in the footwell wasn't the greatest, but it got the point across so I was able to fix my wife's problem before having a flat battery. The little yellow plastic piece broke and it was too late to go the the parts store but for a temp fix I taped 3 pennies together and taped that to the brake pedal arm where it would have touched. Worked great!

@mattatlfan 6 жыл бұрын

I'm glad that you found the video helpful and hope you'll consider subscribing

@MinkyUrungus 3 жыл бұрын

It was the video and your method that saved me from a disastrous afternoon. Thank you

@toriang96940 3 жыл бұрын

Omg the pennies worked ! Didnt wake up to a dead car and im on early shift . Thank you so much

@rachavya 2 жыл бұрын

MacDaddyGeek, you saved me some typing. You surfaced yet another failure mode; it's the one that I experienced. When I looked under my Toyota Tacoma's dashboard ... 1. I found the switch nuts nice and tight, and the switch in what appeared to be the correct position. 2. I removed the switch to test it with a meter. It tested fine. And yes, that switch can fail, although failures are rare. 3. I did NOT see any kind of yellow plastic button, and at the time didn't even realize there needed to be one. 4. Visibility was very low, and therefore I didn't see the HOLE that had been left in the metal as a result of the complete wearing off of the yellow button. A mechanic alerted me to the need for such a button. Without the button, the white plunger (moving part of the switch) was actually entering the hole, and thus had no opportunity to be pressed. As in your case, plugging the hole solved the problem. I used a body panel push pin.

@c.dehoyos7522 Жыл бұрын

@Tabastudios 4 ай бұрын

Omg despite the blurry video bro you have saved us a trip to the mechanic which would have cost more than $100 just for that little plastic piece….life saver!!!!

@lodupkia8793 3 жыл бұрын

you just saved me a weeks grocery...thank you kind American fellow...from a micronesian fellow

@brodieobrien-pickering2202 8 ай бұрын

I can not describe in written words how absolutely fucking estatic i was when this fixed the problem. You sir are a saint, a scholar, and an absolute fuckin bro for posting this video.

@mattatlfan 8 ай бұрын

I was raised in a two parent household, have a wife, two children, and a number of lifelong friends..and yet somehow, whoever @brodieobrien-pickering2202 is just gave me the nicest list of compliments that anyone has ever uttered

@williamhalter8456 6 жыл бұрын

OMG I went through and checked every fuse in the car trying to figure out why my wifes brake lights were staying on and running her battery down: and its Texas 100+ degrees today right now (evening) still in the 90's, sweating my butt off. I watched ur video and had the problem fixed in ten minutes, hurt the crap out of my back laying upside down under the dash but I got her car fixed and I couldn't thank you enough. Great video, to the point and I completely understood your demo with the bolts and all. Thank you so much and my wife says thanks too. You might have said 14 mm wrench,,, but I took a handful of wrenches with me and found the right one, the bigger one i had to use crescent, and my hand but I think I got it tight enough. Thanks!!!

@mattatlfan 6 жыл бұрын

Fuses and relays were my instinctive thought as well. It's an uncomfortable position to have to get into to fix, but luckily isn't any more difficult than it is once you're down there. Thanks for watching!

@kj109 2 жыл бұрын

Use the furniture protector pad instead. That works if the rubber crystallized and broke off. The furniture protector pad is the small pad with a sticky side and soft top to prevent furniture from scratching the floor. Place the pad under the white part where the rubber used to be.

@mattatlfan Жыл бұрын

Good call!

@matthewpennington7387 6 жыл бұрын

I automatically trusted you because of the hat! Very helpful! Thanks man RTR

@Celicagame13 6 жыл бұрын

Matthew Pennington is this John Matthew Pennington from Florida?

@mattatlfan 6 жыл бұрын

KZfaq out here trying to make it a small world

@marysmith6311 5 жыл бұрын

RMFT

@AbortedEvolution Жыл бұрын

Bro. Omg what a lifesaver. My stupid little plastic thing disintegrated to pieces. I was tearing that whole car apart. It's got so many electric gremlins I was sure it was another. Thanks!

@nilsanavarro1658 5 жыл бұрын

Life saver... Got this done at 2 am in less than 5 min lil black ruber had fail out was on floor just had 2 place it back while pressing the break thanks!!

@jazzycat2990 2 жыл бұрын

Same here!

@shannonmoa9193 6 ай бұрын

2024 - thank you so much. Found the problem in one minute and know how to fix it! Even figured it out before hubby 😏 Have put a temporary stopper in place for now (it's night time) and will get a new part tomorrow. Glad I found your video :)

@braaap5096 5 жыл бұрын

Awesome you just saved me a trip to Kia for my wife! Thanks bro

@williamperkins9349 3 жыл бұрын

I'm afraid this was o help. The picture was fuzzy & I could not understand what you were saying. Your bolt thing in the garage made no sense and the echo of the garage made it impossible for me to understand what you were saying.

@mattatwood3979 8 ай бұрын

This was an awesome video. Fixed the problem without having to go into a shop. Thanks man!

@mre507 2 жыл бұрын

This the issue I need to fix but didn’t understand anything you said lol

@ChickMcFugget 3 жыл бұрын

Thank you sir! Just fixed my Hyundai Tiburon!

@mattatlfan 3 жыл бұрын

Nice work!

@davidpowers8186 2 ай бұрын

Good video. Fixed my taillight problem.

@Kjhogan24 4 жыл бұрын

Thanks! I work at a University and a student needed help. Couldn't fix it completely, but was able to get the light to stay off by jamming a pen cap between the two. She'll take it to a mechanic tomorrow for the washer I suppose.

@mattatlfan 3 жыл бұрын

Great to hear and glad you were able to find a makeshift solution!

@lennyperry4466 2 ай бұрын

Thank you! I fixed it myself.

@beckypickard6414 4 жыл бұрын

You’ve saved me and me mum, legend you. Thanks so much

@danielelma153 4 жыл бұрын

You are the best

@mattatlfan 3 жыл бұрын

Awesome! Thanks for the watch

@trainerskulb00d 5 жыл бұрын

Good info! Found my bumper the white post hits broke off. Easy fix.

@gdoubler81 5 жыл бұрын

Thanks man...this helped me out a lot. The yellow plastic piece (blue in my Acura rdx) broke and left a empty hole, so the sensor had nothing to press against. I replaced it with a small nut and bolt. Good as new now.

@Nenebee1024 3 жыл бұрын

My RSX is having the same problem with brake lights, I haven't actually checked to see what is wrong with the sensor yet but this might be a good solution 👀 I read that extreme heat can damage that little part so it wouldnt surprise me that mine is busting in the summertime. Thanks for the tip!

@jdetterb 2 жыл бұрын

Your video was helpful. I didn't need to tighten the nuts. Instead, it turned out a small wax plug attached to the top of the brake pedal fell out, thus preventing the pedal from pushing in the sensor and turning off the brake light despite the pedal being fully released. I re-inserted the wax plug and then the sensor worked fine.

@mattatlfan Жыл бұрын

Right on! Glad you got it fixed for free

@johnnysimsthree6681 6 жыл бұрын

my sensor drilled a whole in mine. i put a penny in between for quick fix. but when moving i will have to get it fixed. thanks bud.

@shovelheadseven 6 жыл бұрын

I put 2 washers in between as a quick fix wrapped in duct tape. Should hold until I make the adjustment correctly. Penny is a better idea.

@danskmacabre 5 жыл бұрын

Thanks for the tip from Queensland, Australia. Was stuck out in the middle of nowhere outside Brisbane with a dodgy brake light that stayed on. The brake sensor screw had fallen out. A quick temporary replacement with a screw got it working ok again!

@toriang96940 3 жыл бұрын

Saved me a days work and so much grief! Thank you from the bottom of my heart

@mattatlfan 3 жыл бұрын

Awesome, glad it was helpful!

@SethBerry79 7 жыл бұрын

I just had the same issue pop up on my 2003 Civic. Thanks for the vid.

@mattatlfan 7 жыл бұрын

+Seth Berry Glad it was helpful!

@gerberagirl11 7 жыл бұрын

did you have to unbolt to get to it or just put the plug in?

@mattatlfan 7 жыл бұрын

It was just a situation where the setup has been loosened over time and needed appropriately tightened. Nothing was unbolted or plugged in here, what are you seeing in your assembly?

@marciesandoval5972 2 жыл бұрын

Looks easy but I have a knee replacement n I cannot bend ugh how much does it cost for someone to fit it for me. Honda Odyssey 2003

@WmTyndale 2 жыл бұрын

Thank You. Much appreciated the mechanics!

@ivanruvalcaba1161 3 жыл бұрын

Thanks man, found the broken rubber washer.

@mattatlfan 3 жыл бұрын

Glad I could help. Thanks for the watch!

@spazchicken1 5 жыл бұрын

thanks so much! Found the little rubber stopper broke off on my 2000 Hyundai Elentra and it was just a hole so it wasn't pushing in :D

@mattatlfan 5 жыл бұрын

Such a small thing but a serious pain if it acts up. Glad the video helped!

@davehed6057 4 жыл бұрын

Thanks so much! Turns out my bushing had disintegrated. Cost $1.69 to fix.

@mattatlfan 4 жыл бұрын

Dave Hed Awesome! Lots cheaper than whatever a repair shop would’ve decided was wrong with it

@33818ual 4 жыл бұрын

Thanks for the tip. I have a 2002 Sana Fe my fix was even easier I just put i small bolt and nut in that empty hole on the brake pedel arm.Thanks again It took 10 min.

@mattatlfan 3 жыл бұрын

Glad it helped!

@jamesbrown7991 4 жыл бұрын

thxs Matt..fixed the prob from your instructions..you tha man

@mattatlfan 3 жыл бұрын

Great to hear!

@AbdulRahman-yq6pm 2 жыл бұрын

If this doesn't work, please check your brake fluid level. It was actually my problem and, thank God, just by adding some fluid all the lights went off.

@atomiccottoncandy4161 2 жыл бұрын

Ty just had to replace second battery because screws came lose and I did not noticed lights where staying on save me a trip to auto zone for a new switch

@mattatlfan Жыл бұрын

Perfect, glad it worked!

@stara808 4 жыл бұрын

totally out of focus and cannot see a thing;) The one that worked for me used 2 pennies glued together glued into the slot where the plastic button was/goes (that broke) along the brake. worked w/super glue like a charm:)

@mattatlfan 3 жыл бұрын

I hear ya. It's an older video with an older camera. Wish I'd have had an iPhone 11 back then and I wouldn't get this comment so often. Hopefully it still helps enough to get somebody out of a tough spot

@garnetnard4284 3 жыл бұрын

@@mattatlfan the younger generation don’t know how good they have it. I used to have to wait 2 minutes for an entire picture to download and show up in my screen. I know I sound like a boomer but I’m gen x! Technology has changed that quickly!

@TheAutoexecbat 2 жыл бұрын

Thank you for this. My son's car had this issue. He got under and discovered the stopper pad had dried up and broke off, but now we know what to fix

@mattatlfan Жыл бұрын

Perfect. Glad it helped!

@scoot1906 2 жыл бұрын

Thanks! I walked out to my car and my brake lights were on. I had no idea how long they had been that way. Your video saved me.

@mattatlfan Жыл бұрын

Glad it helped!

@dannybonesdaddy 2 жыл бұрын

Thank you, this helped. The setup on my Rendezvous was different, but I learned enough from your video to be able to quickly fix it. I had actually broken a zip tie that was holding the sensor down with my toe.

@gamertyper6476 7 жыл бұрын

your hhhwhite piece! lol damn you should make more videos hearing you talk is great

@mattatlfan 7 жыл бұрын

c'mon Ron, people have commented on the way I say words with "wh-" my hhhwhole life and now I'm catching flack on KZfaq over it lol

@marianneeverett9268 7 жыл бұрын

Thanks dude. Very helpful.👍

@mattatlfan 7 жыл бұрын

No problem, that's why KZfaq is so great!

@mattatlfan 6 жыл бұрын

I'm glad that you found the video helpful and hope you'll consider subscribing

@iranianagainsmullahs 6 жыл бұрын

Dude u just saved me a lot of headache, time and money. Had the same problem with hundai tucson 2008 and ur instructoon helped me fix it. Greetings from warm Dubai

@mattatlfan 6 жыл бұрын

Great!

@iranianagainsmullahs 6 жыл бұрын

again thanks a lot. it is very hot right now in Dubai and the last thing I wanted to do is go to to a mechanic for such a "thank to you" little problem.

@romanticbread9833 5 жыл бұрын

Thanks bud, this really helped me out!

@AfroPower28 4 жыл бұрын

Appreciate you for this post ! saved me time & money, this was also the culprit as to why my battery was draining so quickly smh 🤦🏾‍♂️

@mattatlfan 3 жыл бұрын

Thanks! Happy to help

@michaelcvetic5393 Жыл бұрын

Thanks for the tip! Very helpful! My problem was the little white plunger that was stuck in the out position. I have a 2012 Sonata. My design has a little rubber gasket thing that depresses the plunger. Looks like the rubber part warped from years of use and heat. I was able to turn it upside down and gorilla glue it in place. It now seems to be working. Fingers crossed. Thanks again, Matt!

@heyjulieenriquez 3 жыл бұрын

i have a hyundai too and this is my exact problem

@fijiswifty5913 2 жыл бұрын

Thank you for this video and illustration I appreciate 🙏 it alot

@jamesgeorge7898 6 жыл бұрын

This fixed my daughter’s Tucson brake light issue. Thank you!

@mattatlfan 6 жыл бұрын

Yes sir! Thanks for watching

@mattatlfan 6 жыл бұрын

Yes sir! Thanks for watching

@anselmarodriguez626 5 жыл бұрын

James George I have the same problem with my car. Is there a name for the part or what did you use

@nancyhunter8560 Жыл бұрын

Matt, It's been 6 years since you posted this video however, my Kia rondo had this problem. Thank you so very very much as I can get in for a diagnostic.

@mattatlfan Жыл бұрын

It’s wild to think about how much the internet’s collaboration has helped in so many ways. Glad this one came to your benefit!

@crashbandit3 11 ай бұрын

Thanks; God bless you!

@anastasiachandler1407 3 жыл бұрын

Thank you sir Great job.

@mattatlfan 3 жыл бұрын

Absolutely! Thanks for the view and comment

@judithderob4937 Жыл бұрын

Thank you sooo much! I broke the plastic thing because i used the break too strong while the car was off. It was already 10pm and i had no one to help me. I used a penny and a tape. Worked perfectly. Plus the comments helped a lot !

@grahamweaver4423 7 жыл бұрын

Thank you for helping in my time of need.

@mattatlfan 7 жыл бұрын

Graham Weaver Glad it was helpful!

@mattatlfan 6 жыл бұрын

I'm glad that you found the video helpful and hope you'll consider subscribing

@theMetallico666 2 жыл бұрын

Life saver man, my Civic had the issue, apparently a bluish plastic that was holding the sensor bursted out (heat in south TX is unbearable these days). Used a nut and a bolt to solve the issue and its working like new.

@mattatlfan Жыл бұрын

Awesome, glad it helped!

@omarcamargo7710 3 жыл бұрын

Thank you. At first I did not clearly understand the lesson, but once I got under the panel Bingo!!! I saw what you were talking about. First I tested te switch by pushing it in and then adjusted the 2 nuts and done.

@mattatlfan 3 жыл бұрын

I'm glad it helped! It definitely wasn't the easiest thing to depict but once you get into it I thought it could be a guide to get it fixed

@manuelcantu8572 3 жыл бұрын

Great information, Thank you

@mattatlfan 3 жыл бұрын

Glad it was helpful!

@mohammedal-hawaj9105 8 жыл бұрын

i have same issue with my 1991 k5 blazer, which is the brake light always ON inside the dash ? any advise ? oil brake level is good

@crystalbishop991 6 жыл бұрын

Mohammed Al-Hawaj ki

@christinepagano5255 6 жыл бұрын

Great information! Thank you for posting, aloha!

@mattatlfan 6 жыл бұрын

I'm glad it helped!

@Snarkapotamus Жыл бұрын

How the hell do you get under there?

@ChristinaMorrison Жыл бұрын

Thank you so much for this video!!! Literally a life saver! Took about 2 second to fix after watching this.

@nikzawi8696 7 жыл бұрын

Worked beautifully, thanks!!

@mattatlfan 6 жыл бұрын

I'm glad that you found the video helpful and hope you'll consider subscribing

@johnvargas997 2 жыл бұрын

Thank you.👍

@mattatlfan Жыл бұрын

Glad it helped you!

@henrynwosu1 5 жыл бұрын

Thank you.

@pixelFiz 7 жыл бұрын

Thanks for showing the placement, saved me a ton of time.

@mattatlfan 7 жыл бұрын

+Nate Estelle Absolutely! Glad it was helpful

@mattatlfan 6 жыл бұрын

I'm glad that you found the video helpful and hope you'll consider subscribing

@sunshineorraiin 2 жыл бұрын

Thank you. I put a nickel and some tape. Looks like I’m missing a part in this region. I appreciate your help, super easy to understand.

@mattatlfan Жыл бұрын

Awesome! Glad it was beneficial

@lizhurgeton2637 2 жыл бұрын

dammit, at my car, shot of tequila in hand, TRYING to fix this..JUST FIGURED OUT WHY BATTERY KEEPS DYING .but sure wish it was a little CLEARER..I'm blurry enough on my own, thx 4this, btw. hopefully.. SOMEONE in my neighborhood will see me, feel bad and stop to help...coz.. UHUH

@mattatlfan Жыл бұрын

5 star comment. Respect.

@ef7952 Жыл бұрын

Huge help! Thnx bro

@hobiejohnneal 6 жыл бұрын

Great help bro, thanks a lot!

@mattatlfan 6 жыл бұрын

Glad it helped, thanks for watching and hope you'll consider subscribing

@mattatlfan 6 жыл бұрын

No problem, glad it helped!

@shundatekkenlord3929 Жыл бұрын

Thank yu made that very simple

@Rolandjams 4 жыл бұрын

I seen the busted bumper on the floor and looked under and seen a spare right next to it. I put it where I needed it with some silicone glue for back up. . Thanks for the tip.

@nenezaze3252 2 жыл бұрын

@makaylabrooks8826 2 жыл бұрын

Thank you so much! Thanks to you I was able to fix the problem myself!😁🙏🏾

@mattatlfan Жыл бұрын

Awesome, glad it helped!

@xeneizeusa 4 жыл бұрын

Thank you. Helped point me in the right direction to fix this on my daughter's Tucson.

@mattatlfan 3 жыл бұрын

Glad it helped!

@jeffw3153 4 жыл бұрын

Just helped me out in 2020. Thanks brother

@mattatlfan 3 жыл бұрын

Glad to hear it! The audio/video in that video are a definite sign of the times from when it was recorded but it still does ok when you're in a pinch

@thefuccen1 Жыл бұрын

Thank you it worked big dog👍🏾👍🏾

@mvr89rodriguez44 4 жыл бұрын

Thank you so much it's a small rubber washer that fell off I found it on the floor thanks for your video

@MrTito2312 5 жыл бұрын

Thanks, fixed my mdx

@mikealdridge5415 Жыл бұрын

Thanks

@SonLe-wv9gn 4 ай бұрын

Thank you! Just fix it

@nativeTania 3 жыл бұрын

Thank you!!!

@karenrowehl 11 ай бұрын

Thank you! My brake lamp switch was adjusted 3 days ago and I thought the problem was fixed. Tonight, my brake lamp didn’t shut off when I turned off the car and I was afraid the lights would drain my battery overnight. Your video helped me see the problem area and I just shoved a thick note pad in the middle of the contraption and that was successful in shutting the lights off. Now at least I’ll have a working battery so I can drive to the repair shop -to get the brake lamp switch REPLACED this time! I left a big note for myself in the seat to remember to pull the note pad out before I try to drive it!😂

@gemcan54 3 жыл бұрын

After this brake light was fixed under pedal my carpet is wet like a leak has happened. Did the car dealer mess up somewhere?

@etiennerojas2987 4 жыл бұрын

I. Got. A code for my vehicle po573 indicates that the brake switch is bad. My brake lights switch indicator shows its on . but. When I step on the brakes the brake lights turn off. Then When I realise the brake pedal the. Brake lights turn off. So my brake lights work just fine. Any recommendations or should i just switch it anyways?

@V0SUGMI 7 жыл бұрын

Yo matt, have a 2002 santa fe as well, found the video very helpful, it is the exact problem I'm having, my "yellow buffer pad" has actually broken into pieces, any idea what the name of that part is so i can buy one? or will i have to buy the whole pedal?

@mattatlfan 7 жыл бұрын

Thanks for checking the video out! Its technical name is the brake pedal stop pad. Super cheap part that you can check out here (this one is for a sonata just because it was the first link that popped up when I googled it) ---> www.partsgeek.com/j8hb8h2-hyundai-sonata-brake-pedal-stop-pad.html?PartsGeek+ShoppingCom&fp=pp&Hyundai+Brake+Pedal+Stop+Pad

@Joe_C. 6 жыл бұрын

I just had the same problem in an 04 Sonata... THANK YOU to both of you for the question and answer! 😊

@dogcow666 5 жыл бұрын

Thanks had the same prob I just stuck a wad of paper up there for now to actuate the switch while the car isnt running

@viktorsanchezz8093 5 жыл бұрын

Fluffy Panda brake pedal sensor pad

@patriciaguenzler9150 10 ай бұрын

Thanks 👍

@calin4506 3 жыл бұрын

Thank you youtubeman!

@101000102 7 жыл бұрын

Thanks for this explanation

@mattatlfan 7 жыл бұрын

Glad it was able to help!

@mattatlfan 6 жыл бұрын

I'm glad that you found the video helpful and hope you'll consider subscribing

@liamdonaldson6449 2 жыл бұрын

Looked at our 2011 Rav 4 and that switch is totally different. Does not seem to have any adjustment nuts at all. Looks like its enclosed inside a plastic shield. Probably Toyota making sure we buy a new part and pay for the install?

@MinkyUrungus 3 жыл бұрын

Thanks a lot, man!

@vee_you Жыл бұрын

Glad I came across your video. Bought a new car and it seems to be having this issues. This gave me hope

@mattatlfan Жыл бұрын

Awesome and congrats on the new vehicle!

@meftor 4 жыл бұрын

Just fixed this on my daughter's Hyundai Accent. Thanks man!!!

@mattatlfan 3 жыл бұрын

Glad it helped!

@robertdonnelly7897 5 жыл бұрын

I used a cork & glued a dime to it that presses on the switch. Works great

@mattatlfan 5 жыл бұрын

Good deal! Glad it helped

@LOOSEBUDZ 5 жыл бұрын

this is just a short fix the hard surface will eventually ware out your switch better off buying the proper part its only like 5 bucks

@ebrazil25 4 жыл бұрын

I have an 2013 Elantra brake lights are on and right light is staying on hope this work’s unplugged both lights this morning so battery wouldn’t die.

@mattatlfan 4 жыл бұрын

I’d be surprised if this is connected to your issue or only one light is staying on. That sounds more like an electrical component needing attention

@costakb9915 5 жыл бұрын

Thank you for the video!! I was able to fix my brake problem on my 2004 Sonata! Its temporary until my husband can get to an auto parts store, but now no brake lights on, until I depress the pedal!

@mattatlfan 5 жыл бұрын

I'm glad it was helpful!