What are PCBs? || How do PCBs Work?

Рет қаралды 1,095,610

Күн бұрын

What is inside of PCBs? Smartphones have dozens of components, and they are all connected thru a vast labyrinth of wires inside the PCB! So how exactly do PCBs work?
PCBs may be incredibly complex, however, they are rather easy to design and order. For a quick turnaround and inexpensive option for buying any variety of PCB, consider PCBWay: www.pcbway.com/
Do you want to support in-depth engineering and technology education? Support us on: / brancheducation
Website: www.branch.education
On Facebook: / brancheducation
On Twitter: / teddytablante
On Insta: / brancheducation
Or Join us on KZfaq Memberships: / @brancheducation
Twitter: @teddytablante
Made by Teddy Tablante
Table of Contents:
0:00 Intro: Enter the PCB
01:11 Section 1: What is a motherboard?
01:45 Section 2: X-Ray Image of PCB & Wires from the SoC
03:38 Section 3: What are the layers of a PCB?
05:00 Section 4: Pursue STEM Careers!
06:29 Section 5: Vias and holes in the PCB
07:55 Section 6: Different designs of PCBs, Sizes, Weights, and Thru hole
09:22 Outro: Summary and Branches
Background Understanding: Wires, Power, Ground
Key Branches from this video are: PCB Design, PCB Manufacturing, Solid State Drive, Supporting Chips, System on a Chip, Wifi Chip
Erratum:
Via is a backronym or apronym. 99% (except the Wikipedia article about them) of people don't use the phrase Vertical Interconnect Access, it's just called a via.
10:06 Manufacturing misspelled as Manufacutring
#PCB #Smartphone #Howitworks
Animation built using Blender 2.79b www.blender.org/
Post with Adobe Premiere Pro and Adobe After Effects
Sound editing with Reaper
Work Cited:
"PCB Layout Recommendations for BGA Packages." Lattice Semiconductor. March 2017
"Printed Circuit Boards, Technical Engineering Guide." EPEC.
"Rigid PCB Design For Assembly Guide." Bittele Electronics Inc. September 13th, 2018
"Rigit PCB Design For Manufacturability Guide." Bittele Electronics Inc. October 04, 2017
"Qualcomm Snapdragon 808 MSM8992. Notebook Check.
Schweitzer, Albert. "PCB Layer Stack-up" Fineline Technical Workshop. September 2015
Wikipedia contributors. "Computer" , "Electronics" , "Flea","Printed circuit Board", "Surface Mount Technology", "System on a Chip", "Through-Hole Technology" Wikipedia, The Free Encyclopedia. Wikipedia, The Free Encyclopedia, November 26th, 2019.
Yap, Charley. "How to Successfully Design a BGA." Altium, October 26th, 2016
Image Attribution:
An entry-level IBM System/360 system, on display at the Computer History Museum. Dave Ross Flickr, commons.wikimedia.org/wiki/Fi...
Ifixit Smartphone Teardowns for:
www.ifixit.com/
Google Pixel 4XL: Jeff Suovanen
Samsung Galaxy Note 9: Arthur Shi
Iphone 8: Andrew Optimus Goldheart
Huawei P30 Pro Teardown: Dominik Schnabelrauch
OnePlus6: Jeff Suovanen
LGV20: Dominik Schnabelrauch
LGV10: Me! Teddy Tablante
Nintendo Switch: Jeff Suovanen
Samsung Galaxy S8: Sam Goldheart
Iphone X PCB: Andrew Optimus Goldheart
Iphone X X-Ray: Sam Goldheart
Music Attribution in Order:
Morning Dew from KZfaq Audio Library
Above Planets by Patrick Patrikios from KZfaq Audio Library
Stars and Constellations by Sarah the Instrumentalist from KZfaq Audio Library
Gently Onwards from KZfaq Audio Library
Sunburst, Tobu & Itro is licensed under Creative Commons Attribution License
www.7obu.com
• Video

Пікірлер: 1 100

@BranchEducation 4 жыл бұрын

Which video topic do you want me to explore next*? I would like to know what you would like to learn more about and what I should prioritize. Potential Smartphone/Tech topics are: SSDs, LCDs, Wifi, Microchips / SoCs, RAM, GPS, wireless charging? Or I can jump into other topics like Quantum Computers or Satellites? Or would you like more conceptual engineering/physics topics such as 'What is temperature?' Note that next* means I'll work on it after the video I am already working on.

@MrAkshaydude 4 жыл бұрын

Ssd / memory management

@Mohammad-iw8cl 4 жыл бұрын

microchip or SoCs

@RohitKumar-us8my 4 жыл бұрын

Rectifier

@rampawar 4 жыл бұрын

Oleds and other display technologies

@TechMyo 4 жыл бұрын

The name of a transistor depends on which factor?

@pravinladde 4 жыл бұрын

I am a PCB designer.. and every PCB designer should watch this animation before he start/choose this as career... Such an inspiring animation.

@reyariass 3 жыл бұрын

How do you go about designing a PCB? I feel like it’s more of a puzzle where you just try to fit the components you’ll be using onto the board

@totallyfrozen 2 жыл бұрын

@@reyariass According to what’s presented in the video, I’d assume you’d need a mission (what are you tryin to do?), a plan (what do I need?), and a design (how can I fit all this?). Then design the PCB. The components are subordinate to the design. You select the components to match the PCB, rather than designing the PCB to fit the components.

@JamieVegas 2 жыл бұрын

@@totallyfrozen There are tools that do autorouting of traces for you. They help find the optimal locations to fit everything.

@dewaldsteyn1306 2 жыл бұрын

Oh ok then i can ask you this because google has no answers and this guy dont find or read my now deleted comment: what type of steel and so on do you use to make this thing?

@pravinladde 2 жыл бұрын

@@reyariass First we design a schematic with all component (eg- IC's, resistors, capacitors etc) which actually is an electrical circuit with its connections. then each component also have its landing pattern (footprint) associated with it. Then we start actual board design. PCB designing tools help us showing connections between pins of components from the schematic. then we place each component on some fixed board size such that there will be minimum overlap of signals. we route the tracks and send this design for manufacturing. hope you got at least bit picture.

@JerryRigEverything 4 жыл бұрын

Dude your videos are epically brilliant.

@BranchEducation 4 жыл бұрын

Thanks!! I'm glad you enjoyed the video!

@princeancheta4041 3 жыл бұрын

Love your vids, can you review huawei nova 8 se? it seems great

@user-ld8bz3rv3v 2 жыл бұрын

Maybe photolithography in IC production has a similar way of doing it

@Bullresearch-India Жыл бұрын

You rightly said that....

@loaded6666 Жыл бұрын

See they don't break things :)

@JaredOwen 4 жыл бұрын

Teddy you took this video to the next level. I learned a ton! Keep it up

@BranchEducation 4 жыл бұрын

Thanks!! I'm glad you enjoyed the video!!

@shivam4428 4 жыл бұрын

@@BranchEducation yes bro... Awesome content .... I am waiting for videos. Start about devices used in jet fighter and laptops

@vighnesh.acharya 4 жыл бұрын

I am happy to see your comment here 🥰 I love your videos also 😍

@KamrulIslam-oj6io 4 жыл бұрын

Jared owen sir i want be your friend of Facebook or whatsapp.... My whatsapp number +8801768219001. And Facebook link = m.facebook.com/profile.php?ref_component=mfreebasic_home_header&ref_page=%2Fwap%2Fhome.php&refid=8&ref=dbl

@KamrulIslam-oj6io 4 жыл бұрын

I will wait for you my lovely sir

@user-uw1wq9rj8g 4 жыл бұрын

This is what I call an educational animation, amazing graphics and great presentation

@BranchEducation 4 жыл бұрын

Thanks! I'm glad you liked it.

@blitz8229 4 жыл бұрын

True!

@EEVblog 4 жыл бұрын

Damn that's impressive, well done! I can appreciate the work that went into that.

@RandyLott 4 жыл бұрын

Now I know why KZfaq recommended this video. Been watching you for nearly a decade, Dave! I think I've watched at least 1000 full videos.

@Ghost-ut3hq 3 жыл бұрын

Now I now why I got this great video suggested.

@ZackXa 3 жыл бұрын

The little break in the middle I was expecting a paid advertisement, was pleasantly surprised. I really appreciate that plug and agree 100% :)

@KC_Smooth 4 жыл бұрын

It’s fascinating enough to picture this being made on a large scale, like the size of a table. It’s absolutely mind boggling that they shrunk this massive electronic city down to something that fits into your pocket.

@hellohypo2009 Жыл бұрын

I'm a simple man. When people tell me what the distance is in both meters and feet, I'm happy. Thumbs up and subscribed

@aaseemshaikh8164 4 жыл бұрын

I wish I could give thousands of like to these video

@BranchEducation 4 жыл бұрын

That would be convenient if people could give multiple likes.

@blitz8229 4 жыл бұрын

:D hahaha

@albertlee638 4 жыл бұрын

Can you please do a video on the "making of this video". Thanks.

@cristubek2416 3 жыл бұрын

The comment I was looking for

@pinnaclemindset8985 3 жыл бұрын

Me too

@fxbear 3 жыл бұрын

I love your series. I worked on a main frame as a teen, making sure core memories were not compromised. We didn’t have home computers yet so I learned FORTRAN and cobol from a book, writing code with pen and paper, then pretending I was a computer and executing my code by hand. Back then, if code didn’t run from top to bottom cleanly, it was considered bad code. That made object oriented coding difficult for me to learn later. Things are so complex now, I feel like I’m starting over and your videos have helped tremendously. Whoever is doing your animation is doing a fantastic job. My career took me through post production and game animation so I appreciate the work displayed here.

@hritikroushan6068 2 жыл бұрын

I am an engineering student of ECE and these videos give me a lot of inspirations. Thanks a lot to Branch Education. Lots of love from India.

@tedz2usa 2 жыл бұрын

Did you really take apart a cell phone, and de-solder all of the surface components to make these 3D models and graphics? Truly incredible work! I admire the work you do to make accurate, compelling, and clarifying visualizations for your videos!!

@DraRed73 3 жыл бұрын

Mind blowing. This video highlights just how impressive the engineering behind our devices is.

@mdt9921 4 жыл бұрын

This channel is highly underrated. The animations are done very well, the audio is clear and easy to understand and everything ties in. Keep up the good work!

@joelwong62 4 жыл бұрын

Superb job on this video! (It's the only in-depth one I could find on PCB's so far). One reason I really like smartphones is the embodiment of so many separate and complicated technologies, yet all working in harmony to deliver a good experience to its users. Please continue on!

@justinalyne9573 3 жыл бұрын

Hey Teddy! I just wanted to say thanks for making this video. Currently, I'm a college student studying to become a computer engineer. I 100% agree that more people should get exposed to these STEM-related fields. Technology will always grow; for example, when I experienced it in grade school, we transitioned from homework/lessons on paper to Chromebooks. Even during COVID, many schools use online resources to continue their education, thus influencing new ideas for how teaching in schools should be done. Overall, we would not be at this point in our lives with easy access to the WEB and other vital tools/resources if it wasn't for the thousands of STEM-related inspired students in the past. I also encourage others who are considering an education in a STEM-related field to give it a go as you never know what creative genius inventions you could produce to push the human race forward.

@isaacllanas2828 2 жыл бұрын

Dude you are an inspiration to the new generation of Electrical Engineers, keep on with your good job!

@petermainwaringsx Жыл бұрын

I remember when I used to be able to repair stuff with a soldering (not a silent "L" in the UK) iron and a few hand tools. After watching this video I don't feel so bad about not being able to do that anymore. Another wonderful video from you, and thanks for your efforts.

@vypmnoo0 4 жыл бұрын

Wow this was really amazing and thoughtfully well put!! It is very clear that the amount of work put for just one video was beyond what most people do!! Loved it!

@rayer2641 4 жыл бұрын

Wow, such clarity in your presentation, excellent quality graphics. Keep them coming. Quantum computing and AI could be fun topics to hear about.

@BranchEducation 4 жыл бұрын

Thank you!! I have some really good visuals for quantum computing that I'll use once I get to that episode.

@vishank7 3 жыл бұрын

This is just so darn EPIC man! Thanks a ton for existing hahah, keep up the good work!😄💎💎💎

@hullinstruments 2 жыл бұрын

This is a masterpiece. This is just as beautiful as vintage IC chips. You know the ones I’m talking about… gorgeous chips with purple/white ceramic, Luscious gold pins and details, and visible traces on the surface of the ceramic. This video is just as incredible! They are both amazing feats of engineering, and artwork!

@randomelectronicsanddispla1765 4 жыл бұрын

The amp hour podcast (eevblog) pointed me to here. I'm glad it did. The amount of work and detail is amazing

@MrGarda42 4 жыл бұрын

This is possible one of the best animations I've seen in this kind of a video. Hats off matie 🍻🍻

@BranchEducation 4 жыл бұрын

Thanks you tons!!

@brodriguez11000 4 жыл бұрын

Still wondering how it was done.

@arionulibasa 3 жыл бұрын

@@brodriguez11000 same. I wonder too

@a2.Milk85 4 жыл бұрын

Hands down one of the best educational videos I have seen. This is pretty much Discovery 2.0. Thank you kindly

@adam_a923 2 жыл бұрын

I absolutely love taking electronics apart and learning how circuit boards work! Thanks for this video, it explains a lot!

@Masterr59 3 жыл бұрын

This channel was an immediate subscription because of how organized and detailed your videos are. Your animations and research, it's wonderful and I really admire that effort. I'm excited to learn more and will happily share this!

@BranchEducation 3 жыл бұрын

I appreciate it! Tomorrow I'll upload an even more detailed video! Hope ya like it.

@colejohnson4941 4 жыл бұрын

Wow, amazing job. I already knew pretty much everything in the video, as I'm a computer engineer, but I stuck around because the animations and production quality were beautiful.

@BranchEducation 4 жыл бұрын

Thanks tons! What type of computer engineering are you in?

@SuperGGLOL 2 ай бұрын

how advanced is this? This technology is so vastly complicated and the necessity of precision (wire's not touching each other yet so close) makes my jaws drop.

@johndinsdale4471 2 жыл бұрын

I am stunned not only by the content and presentation but also by the animations to help the understanding of this material. I have seen remarkable progress in engineering and science in my 70 years of life and cannot begin to imagine what the next 70 years will produce. How exciting to be young enough to be involved.

@Gauravkumar-so6ip 4 жыл бұрын

I knew that you must have done a lots of hard labour to present this beautiful knowledge infront of us....... Thanks a lot ☺️ Keep it up

@BranchEducation 4 жыл бұрын

Thanks!! I'm glad you enjoyed it.

@kurtemoyo3182 3 жыл бұрын

Amazing explaination. This is the new way of learning. Reading it the concept will took a lot of time and processing, but you explained it in a very simple and understandable manner. Great job Teddy! Keep going and inspire the next generation!

@89erbenny 4 жыл бұрын

This is just awesome, your footage and animations. Great job!

@Chaosman88 4 жыл бұрын

That is the best video I watched on the subject!

@para4436 4 жыл бұрын

The intellectual stimulation I needed.

@kevalsanghvi5974 4 жыл бұрын

You are one of the best creator on youtube. I love to watch your videos and learn from your videos. Please continue making this kind of awesome videos and educating us. You deserve a great amount of subscribers. I appreciate your efforts. Thank you.

@BranchEducation 4 жыл бұрын

Thank you tons! I'm glad you enjoyed the video. I'll definitely keep it up.

@mandeep5993 3 жыл бұрын

This is one of the videos where you get glued to the screen with astonishment. I was like Wowwwwww ( literally with lots of w). This is beyond amazing. More power to you.

@proit8453 3 жыл бұрын

This channel is a gold. Beautiful 3D animations, tons of knowledge, everything explained very clear. I can't wait for future videos. Thanks for your hard work!

@moritzfriedrich 4 жыл бұрын

As usual, this is an absolutely amazing video!

@BranchEducation 4 жыл бұрын

Thanks!! It's much appreciated!

@PCBWay 3 жыл бұрын

It's so informative and well-explained about PCB. Good job !👍

@brentnelson3703 3 жыл бұрын

Supported by a famous PCB manufacturer 😉

@paulwaldner1693 Жыл бұрын

This video very well describes what PCBs are. I have only a couple of small little quibbles with the video: the video doesn‘t show the large scale end of networking PCBs and it doesn‘t explain how with the use of flex-rigid PCBs, the number of connectors in a device are greatly reduced and signal integrity is greatly enhanced. But again these are truly quibbles! This is an excellent overview of the humble PCB using the modern cellular phone as a “show-and-tell” vehicle. I have worked in the PCB industry for nearly 50 years now and can attest to the great and accurate job you have done here in making this video.

@humankibo1560 10 ай бұрын

I learned from you more than even I could be learning in school for 10 years. Thanks, a lot man; your explanation is Immaculate.

@DeoMachina 4 жыл бұрын

The animation combined with the 3D models and real photographs is exceptional, this deserves to be a huge channel. I work in electronics production and even I didn't know some of this! I gotta say though, making these things is way, WAY easier than fixing them. I've seen some uh, interesting PCB designs too :P

@BranchEducation 4 жыл бұрын

Thanks for appreciating the video! It is SO much easier to make them than fix them. I've fixed traces on a 4 layer board with grinding and scratching out inner traces, but I have no clue how I would go about fixing a 10 or more layer board.

@DeoMachina 4 жыл бұрын

@@BranchEducation Honestly at my place we don't even get involved with trace repair, its components only and even then there's so much that can go wrong with board population!

@Mike_droptv 2 жыл бұрын

@@BranchEducation I guess you're already aware of that :D, but no one fixes broken wires anymore. Most pcb's are modular, so you can easily swap out a broken pcb for a fresh one. The most you get is replacing a broken BGA, which is already a pain :D

@BranchEducation 2 жыл бұрын

@@Mike_droptv I'm familiar with that. I have in fact reworked PCBs in the past because of design errors. Cutting traces, rerouting, and reworks, in general, are a pain, but sometimes ya gotta do it to get design verification before respinning the boards.

@Mike_droptv 2 жыл бұрын

@@BranchEducation Oof, that sounds like a hoot and a half. Fixing broken pcb's is one thing, but correcting design errors on the internal layers is just... these anxietys are kicking in again :D Awesome video btw, love your work 👍

@abdurrehmanhafs7430 4 жыл бұрын

I really love it Tnx so much for explaining. God bless us.

@BranchEducation 4 жыл бұрын

Thanks! Glad you enjoyed the video.

@ngongachansa1701 2 жыл бұрын

You can explain it well enough, so you know the stuff. I enjoyed every bit of it....thanks

@user-py7wp6nw9h 3 ай бұрын

4 years after, I still love what you do . Thank you!

@rampawar 4 жыл бұрын

Very detailed animations and best explanation. Thank you for this interesting video

@BranchEducation 4 жыл бұрын

Thanks a ton!

@ayushdaas 4 жыл бұрын

Jay shree Mahakal, sir G ❤

@polloman15 Жыл бұрын

What a wholesome way to finish the video. Thank you, it was amazing :)

@redheesh 4 жыл бұрын

One of the best channels explaining working of electronic gadgets and technology in detail. Great work. Thank you.

@shlok975 4 жыл бұрын

8:51 those components are still called through hole components and they are still used today by hobbyists especially as they can be easier to solder.

@BranchEducation 4 жыл бұрын

I still have a ton of these components in a slew of plastic bins.

@Wingedmechanic 2 жыл бұрын

For those who wonder how those intricate labyrinth of wires end up there so precisely, They are not put there, but formed from a sheet of copper over the FR4 or phenol board by removing the copper from the areas where it is not required. It is done by applying a protect pattern mask over the copper sheet where wires are to be, and then dissolving the unprotected areas of copper in a chemical acid or salt solution. It is called etching.

@leechjim8023 6 ай бұрын

Sounds similar to how the chips are made!

@virenhirpara1876 3 жыл бұрын

That was mind-blowing. You really work so hard to creat this animation and you also took care of every single small detail.

@tharlunnaing2469 4 жыл бұрын

Thank you for the amazing animation. This help me with visualizing PCBs internal constructions.

@HarmonicWave 3 жыл бұрын

It feels so mind-bending to realize I'm watching this video as the PCB in my smartphone is active in processing it... Kind of the same feeling I get when I watch a video about the human brain and realize my own brain is processing the information about itself. Woah.

@Mohammad-iw8cl 4 жыл бұрын

i did shared and subscribed .. anyone else ?

@BranchEducation 4 жыл бұрын

I did too!

@neveroddnoreven1553 2 жыл бұрын

this is AWESOME. You explain it so clearly.

@iyadbin9489 3 жыл бұрын

Wow..the best animated educational vedio I have seen so far on youtube

@b_40_princekumargupta51 4 жыл бұрын

Just amazing 😍😍😍can i know your qualifications ...if you want to share

@BranchEducation 4 жыл бұрын

Before dedicating my work to these videos, I was a Systems engineer for Ion implanters in the semiconductor industry. I got to see a lot of the microchip fabrication process. At university I got a degree in both Electrical Engineering and Mechanical Engineering.

@mayonnaisetheinstrument4305 3 жыл бұрын

"There is one football field..." And that, kids, is how i knew he was american

@np7145 3 жыл бұрын

Your passion for explaining things is what blew my mind

@Limeayy 4 жыл бұрын

i appreciate this animated video Branch Education. Keep up the great work! THANKS!

@BranchEducation 4 жыл бұрын

Will do!! Thanks for watching.

@beondshreya_4286 4 жыл бұрын

Hello

@beondshreya_4286 4 жыл бұрын

Frim Lucknow

@danielmacias9924 4 жыл бұрын

omg! the graphics in this video, the way you explain everything!! congratulations, it's a great work! subscribed

@orangejjay Жыл бұрын

I was looking for a cool video to help update my knowledge of circuit boards ... and have come away blown away by the quality and level of detail that's in this video. It's incredible to see how the technology for PCBs has rapidly been updated and even better to see the cool things we can now do just to explain that tech. Thanks for putting this out there!

@profewiase 3 жыл бұрын

That's a great presentation. I've learnt a lot today. I'll come back for more. Thanks

@AIhyp 3 жыл бұрын

Absolutely amazing video🔥🔥🔥 Highly appreciate your work dude ❤️

@shenoaglasgow988 5 ай бұрын

I also have to say, I actually learned answers that I've been looking for... thankyou for your accuracy...the fact that knowledge can be precise and to the point is helpful and not boring!

@wurzeln8817 3 жыл бұрын

Thank you for making these videos. Im from a poor country where information like these are very scarce. So having high quality education for free is helping me out greatly. Thank you so much

@fangzhi_zhao 3 жыл бұрын

The animation is so so so good. And the explanation is so so so clear. Truly great work.

@TwoBitSorcerer Жыл бұрын

This is brilliant! I hope much more videos like these exist on this channel. Just started exploring it. Thank you so much

@JM64 3 жыл бұрын

Such a simple yet intricate process! Very informative video.

@supreetb6453 3 жыл бұрын

Your videos are very informative animated ones! I downloaded 14 of them and this was 9th one. Technology is important and interesting, it is necessary there must be an explainer like you as well.

@mimiii1788 2 жыл бұрын

Wow, such complex matters explained so well! This video is beautiful! 😭

@TheDanyschannel Жыл бұрын

Top notch animations with simple explanations that don't misrepresent any technical detail. Awesome content!

@floodychild 3 жыл бұрын

Big thumbs up for the mid-video message, inspiring people to pursue a career in STEM. Great appreciation shown to those that make our smartphones a thing.

@n0f3aR629 4 жыл бұрын

The best education channel on youtube !!!! You deserve waay more subscribers !

@markarisman1071 2 жыл бұрын

Love the graphical illustrations! Thank you

@javadabtahi6095 3 ай бұрын

How amazing your videos are! detailed and complete! Keep going and make more amazing videos like this!

@aaronw2522 Жыл бұрын

Wow. This man is very knowledgeable and speaks with much clarity. I'm thankful for this video. I hope I can learn more about this soon.

@ariyonaty 4 жыл бұрын

So glad to have stumbled upon this video. As a student currently studying computer engineering, I have yet to find a professor who, although brilliant, can convey a topic with such clarity. I'm sure this was a difficult and time-consuming video to make, but know that we appreciate each hour spend and it truly is inspiring to see the genius in this video. Will most definitely share with classes!

@BranchEducation 4 жыл бұрын

Thank you tons, especially for sharing it with your class.

@sihlejpromajola1718 4 ай бұрын

Brilliant animation, top class...💯👏👏 Simple Education that's beyond Varsity levels...

@Filaxsan 3 жыл бұрын

Another amazing video! Great job, loved it!

@GururajBN 2 жыл бұрын

Very instructive and informative video. The graphics are sophisticated and leave no room for doubt in the minds of the viewer. Never knew that every day I have been using such a complex device. I saw a video on touch screen. Another on SoC. Now, this one on PCB in a cell phone. I hope that one of you geniuses will make a single video explaining cell phones in its entirety. Awaiting with bated breath! I had a client who provided single layer PCBs for entertainment electronics. That was almost two decades. They went out of business because they could not master the technology of making of multi-layered PCBs! Technology ruthlessly discards anyone who cannot keep pace.

@justagenosfan 3 жыл бұрын

your video quality is insane liked for sure!

@RakeshRoshan295 3 жыл бұрын

Your hard work is appreciated 👏🏻👏🏻👏🏻

@joerizalsanchez 2 жыл бұрын

This kind of content is favorite on KZfaq to watch.

@muralidharan6755 8 ай бұрын

thanks for the great video... these things never taught in school nor never studied so much detail in my engineering. clear and excellent detailed informative video about PCB. Teddy you are awesome

@prajithshetty2027 3 жыл бұрын

I really learned a lot. Thanks for making such videos!

@smaklilu90 3 жыл бұрын

The animation work and the explanation is top notch in this channel. I can't imagine I am watching this free. Wow!

@Daniel-lm5ry Жыл бұрын

Love this channel. Thanks for all the useful information.

@SK.The-Machine-Designer 4 жыл бұрын

Year 1992 I was a 16 year old boy I made a wireless transmitter and receiver myself, for that I got some awards, now i'm a professional machine tool designer. I really wonder the development's in this electronic industry especially in mobile phones technology. Your multi layer PCB animation was superb thank you.

@raccoons_stole_my_account 4 ай бұрын

Great video and a very wholesome bit of STEM advocacy!

@VIVEKKUMAR-zh1jg 3 жыл бұрын

10 minutes of pure knowledge , honestly learn alot

@user-wn8ov3mi9j 3 жыл бұрын

영상 퀄리티 미쳤네요..bbb Thank you😁😁

@kingleonard3484 4 жыл бұрын

This man is a living legend. Again, thanks for the great video.

@FragileBitch 2 жыл бұрын

Now this, is what I call education contents worth a subscribe, Throughrough explaination, Not too complicate, Detailed animation and no bullshitery side content.