Another Dull and possibly over long video of the unboxing and install of a Brand X Ascend Dropper Post to my 2020 Calibre Bossnut.
Пікірлер: 46
@RichieTee3 жыл бұрын
Thanks for the video. I just installed one of these. I strongly recommend feeding the cable UPWARDS from the hole in the frame, towards the seatpost clamp - no need to locate the cable with a pick though that little hole.
@yellowjerseybikes32783 жыл бұрын
Theres no right or wrong way to do things like this, whatever works best for you is the right way!
@williams_jamie4 жыл бұрын
Not dull at all, found this really, really useful. Thanks for taking the time to record.
@yellowjerseybikes32784 жыл бұрын
Thanks!
@RioVasey4 жыл бұрын
Got a dropper post tried to install without looking at anything, messed everything up, found this video, thank you. You helped me so much! Sadly I did not take into consideration the kink and bought a 200mm dropper, fair to say its a little big.
@yellowjerseybikes32783 жыл бұрын
Thank you! Glad it helped.
@rhyshott922 жыл бұрын
You made that look so easy i was here 2 hours trying to get mine in today
@yellowjerseybikes32782 жыл бұрын
Ha! I think 30 years as an electrician may have helped me with the cable threading aspects!
@corrieewart48213 жыл бұрын
Great guide. Just fitted my post tonight and found this really useful. Many thanks 👍👍
@yellowjerseybikes32783 жыл бұрын
Thanks. Pleased it helped!
@TheNorthernRider4 жыл бұрын
the kink in the tube is such a pain in the arse, it's funny how calibre was consistent with that one specific part of the frame 😂
@samb23344 жыл бұрын
I’m loving these videos!
@robbiesunshine4 жыл бұрын
Threading the cable through the down post and out of the hole is a right pain... took me hours... I’ve a triple b which is pretty much exactly the same. The bar in the middle of the tube is a right arse... great video though. Thanks very informative
@yellowjerseybikes32783 жыл бұрын
Thanks! I think being a spark for 30+ years helped me no end!
@ELBLACKO453 жыл бұрын
Cut and straighten a wire coat hanger.... Push it through and tape it onto the cable. Then pull the whole thing through. Worked well on my marlin 7
@yellowjerseybikes32783 жыл бұрын
Yep, good idea. whatever works best for you, there's no right or wrong way to do things like that!
@timworsley81244 жыл бұрын
Bit of a pathetic question but.... did you fill the hole around the wire where it comes out of the frame? Obviously it's in a heavy dirt area --- any harm done with water getting in and whatever else do you reckon?
@yellowjerseybikes32784 жыл бұрын
Yep. I used a square of gorilla tape, I believe you can buy KTM grommets that will fit.
@jeffwatson89363 жыл бұрын
Enjoying your series on the Bossnut, do you know if you can upgrade the rear hub to an SRAM XD as I have a spare GX 12 speed cassette, but it doesn't fir the existing hub! Thanks
@yellowjerseybikes32783 жыл бұрын
Not sure on that, would need to do a bit of research...
@archiederbyshire24022 жыл бұрын
Nice video. I have a medium frame aswell. How tall are you because I'm not sure on what size dropper to get?
@yellowjerseybikes32782 жыл бұрын
I'm about , 5'10 with a 32" inside leg.
@wielebny11112 жыл бұрын
Thanks, I'm buying exactly the same bike, but on the dropper size u said 412 mm So it's gonna be: 30.9 x 412? Or 31.6 x 412? Thanks for the great movie!
@yellowjerseybikes32782 жыл бұрын
Hi, if you scroll down the comments, there is a link to the one I bought and fitted in this video.
@simonetherton95372 жыл бұрын
Hi, thanks for the vid. I have the same size bossnut, a medium, do you think the 150 long dropper post would fit it if it was sat as far down the seat post as possible? Thanks
@yellowjerseybikes32782 жыл бұрын
Hi, it depends how high you need the seat, the measurements are on the brand X website, I picked this size to suit my inside leg.
@trevorgarrett29304 жыл бұрын
Thank you very helpful video. 2nd upgrade don’t forget the pedals 😊 Same question could you post a link for the dropper post please?
Do you know if the travel can be adjusted so that the seat doesn’t come all the way back up to the full length? I have a 125mm travel, but ideally I’d prefer if it only came back up to say 100mm. Thanks
@yellowjerseybikes32783 жыл бұрын
These droppers are infinitely adjustable, just lift your bum how high you want to go and let off the lever pressure.
@kevinshort39434 жыл бұрын
Harry Hill's let himself go a bit :)
@yellowjerseybikes32784 жыл бұрын
It's been mentioned previously...
@ashton__mz60823 жыл бұрын
I have that dropper and am thinking of buying this bike does the dropper go all the way into the seat tube
@yellowjerseybikes32783 жыл бұрын
Hi. Yes this size does. I chose to set it so approx 30mm protruded.
@tipperaryboy933 жыл бұрын
Can anyone help me. I have large one of those and trying to get a dropper post with a stack height of 180mm will a 412/125mm drop x ascend work?
@yellowjerseybikes32783 жыл бұрын
You can search the dimensions online and work out the stack height from them.
@chkn_bongo45124 жыл бұрын
Is this the ascend || for external routing or did you buy the internal routed one
@yellowjerseybikes32784 жыл бұрын
This is the internal routed one.
@chkn_bongo45124 жыл бұрын
Yellow Jersey Bikes how come you bought the internal cable routing when the bike has external cable routing
@yellowjerseybikes32784 жыл бұрын
@@chkn_bongo4512 the 2020 Bossnut has internal routing. The seat tube has a hole ready for the cable to run through. An external cable dropper doesn't run through the seat tube, it would run down the outside of the seat tube.
@chkn_bongo45124 жыл бұрын
Yellow Jersey Bikes oh ok thanks a lot for the communication I am now comfortable about buying this dropper post. Thanks
Thanks, I'm buying exactly the same bike, but on the dropper size u said 412 mm So it's gonna be: 30.9 x 412? Or 31.6 x 412? Thanks for the great movie!