Brazing Steel Soldering Tutorial with Solder and Flux by The Harris Products Group

No video

Brazing Steel Soldering Tutorial with Solder and Flux by The Harris Products Group

Рет қаралды 71,661

11 жыл бұрын

Brazing Steel Soldering Tutorial Solder and Flux by The Harris Products Group. Brazing Techniques with Bruce Cheaney. The two pieces of metal I used are actually scrap pieces of a car axle that I made a pair of custom spurs out of which is a high carbon steel. The brazing alloy I used for this demonstration is made by The Harris Products Group and can be found at most any welding supply. I purchase my welding supplies here in town at Schad & Pulte Welding Supply - Gainesville, Texas.
Brazing is a metal-joining process whereby a filler metal is heated above melting point and distributed between two or more close-fitting parts by capillary action.
Soldering Tutorial for Metal Working
I use a lightweight cutting and heating torch for soft soldering and hard soldering and brazing silver and steel.
👉 Welding and Metal Working Supplies
Hobart Medium Duty Oxy-Acetylene Kit amzn.to/34XOrzy
Harris Solder Kit 5631 & SSWF7 - Safety-Silv 56% 1/16 Solder 1 Ounce w/ Flux amzn.to/389AeSf
STA-BRITE SBSK Silver Solder 3/64 1/2 oz STAR2000 by Stay-Brite amzn.to/2Ykklnu
Shop Fox W1850 Combination Belt & Disc Sander amzn.to/33TsRuT
Sackorange 18 PCS 1 inch x 42 inch Abrasive Sanding Belts - 3 Each of 60 80 120 150 240 400 Grit Aluminum Oxide Sanding Belts For Belt sander(1x42in) amzn.to/2PfptFr
Some of the above links maybe affiliate links, which may generate a sales commission for me. For example gear and leather tools, books, DVD's and videos listed above is in association with the Amazon affiliate program and I’m an amazon associate. Thank You Bruce
✔ Thanks a lot for sharing, subscribing, commenting, and thumbs up here at my KZfaq Channel.
✔ Please hit the subscribe button and tick the bell to receive notifications.
Bruce Cheaney Leathercraft #brucecheaneyleathercraft
⭐ More bit and spur making and metal working videos.
☑ Spur Making - handmade cowboy spurs - Bruce Cheaney bit and spur maker • Spur Making ⭐ handmade...
☑ Bit and Spur Making Tools Equipment for Making Handmade Bits Spurs • Bit and Spur Making ⭐ ...
☑ Brazing Steel Soldering Tutorial with Solder and Flux by The Harris Products Group • Brazing Steel Solderin...
☑ Metal Bending Tool • Metal Bending Tool ✅

Пікірлер: 35

@scottmorrell148 2 жыл бұрын

Bruce Cheaney the jack of all trades . great video

@cheaneysaddles 2 жыл бұрын

Yes! Thank you!

@robgooch6367 10 жыл бұрын

This is how you do a tutorial. Very helpful. Thank you for posting.

@cheaneysaddles 10 жыл бұрын

Thank You...B.C.

@stevenaubin74 Жыл бұрын

Thank you. Haven't done that in around 20 years...

@youarerightthanksforadmitt846 4 жыл бұрын

Very cool! Thank you sir

@cheaneysaddles 4 жыл бұрын

Thanks for watching and commenting.

@geedubb2005 10 жыл бұрын

your work bench looks kinda like mine, well I might have a little more stuff on it. About every couple of weeks or jobs, I have to clear it off so I can find stuff. Thanks for sharing!

@paulparce8456 9 жыл бұрын

Thanks for the info

@vedapierstorff7841 3 жыл бұрын

This is very interesting. Gonna try putting horse shoes together

@laydistar 11 жыл бұрын

Nice work.

@ivettemartinez2212 3 жыл бұрын

Hi can you please help me out I’m trying to braze 2pc of 1018 steel together with just a mapp gas and wanted to know what kind of rods would I need thank you so much

@cheaneysaddles 3 жыл бұрын

This is a link to one of my soldering videos kzfaq.info/get/bejne/rJZlZ9qn0ci4l6M.html

@bodeine454 2 жыл бұрын

I'm trying to find a way to protect the cut ends of a chrome plated motorcycle exhaust. I need to shorten the exhaust pipe by a couple inches but there won't be any plating on the end after it's cut and I'm wondering if silver soldering or brazing the cut ends with something to prevent rust there would work? I know there's zinc paints and clear coats and things like that but I don't think those would hold up well over time, especially on the end of an exhaust pipe.

@cheaneysaddles 2 жыл бұрын

I think it would be to difficult to solder the end of the pipe and make it look good.

@NIGHTWATCHERUK01 10 жыл бұрын

question: can you get silver solder that has different melting points, I have to repair a cam for a lock, but it must me extended first then have a 13mm through hole and then a 13mm key way broched steel bar soldered into the 13mm hole, hence the melting point question,also we only have a gas torch the type used to do copper pipe joints sutable ??? TAMAR-TORCH

@cheaneysaddles 10 жыл бұрын

The Harris Products Group has solders that have different melting temperatures you should be able to get help at your local welding supply. Another resource is Indian Jewelers Supply ijsinc.

@MegaRiffraff Жыл бұрын

Brownells has 55% high temp 1200 degree

@AmericanCoinHunting 5 жыл бұрын

IF I use the Harris 56% solder & can I expect the same kind of results that you experienced ?

@cheaneysaddles 5 жыл бұрын

It will take a little bit of practice. You can do it! By the way I subscribed to you channel.

@timgibson2111 4 жыл бұрын

@@cheaneysaddles You didn't answer his question. I'm also wondering the same tho? Is there a difference in the end result in 45 or 56?

@Longoria1966 3 жыл бұрын

@@timgibson2111 he answered the questions.. he said he could but it’s gonna take a couple try’s..

@johnhall8455 8 ай бұрын

Yes you can for sure… the 55% has a lower melting point so will actually be easier….better to do it on a fire brick not steel which takes the heat away..

@naoufelmelayh240 4 жыл бұрын

hi bruce thanks for video, i see it is alloy silcone bronze i think , no? 'im looking at alloy brazing , low temp , cold brazing , what do you suggest , ? silver alloy , always for sheet metal , galvanized thanks

@cheaneysaddles 4 жыл бұрын

Harris Products low heat soldering wire and liquid flux.

@mak2349 10 жыл бұрын

I have a clutch basket from a BSA motorcyle. One of the threaded studs, which are brazed through holes in the back of the basket, has become loose and needs to be re-brazed. Could i carry out this with a butane torch? I am a brazing virgin.

@cheaneysaddles 10 жыл бұрын

I am not sure if that's enough heat, You might try experimenting on some scrap pieces of steel before you try the basket.

@squirrel1179 10 жыл бұрын

Will this work to fill in small pinhole leaks on a steel tube? Not sure of the alloy, I know its not stainless

@cheaneysaddles 10 жыл бұрын

The Harris soft solder should do the trick.Bruce

@miss.wright3035 2 жыл бұрын

Can this be done on sheet metal about same gauge as on a car ?

@cheaneysaddles 2 жыл бұрын

I think this type solder takes to much heat and will distort the sheet metal. I did look and find a good video on tinning and soldering and here is the link that may be what you are looking for. kzfaq.info/get/bejne/bp2WqLefp7mWknk.html

@ThisTall 4 жыл бұрын

What is the minimum powered torch you think I could get away with to silver solder 1/4 aluminum to 1/16” steel hinges? My propane torch can’t get it done.

@cheaneysaddles 4 жыл бұрын

You will certainly need a Speciality solder for doing this