Breaking Down Aluminum Welding Myths and Thoughts with TIG 250P AC/DC

No video

Breaking Down Aluminum Welding Myths and Thoughts with TIG 250P AC/DC | YesWelder

Рет қаралды 6,800

YesWelder

Күн бұрын

Пікірлер: 22

@sonnysniper2730 10 ай бұрын

Unfortunately Yeswelder phased out the Tig 250P AC/DC machine. Please bring back the Tig 250P AC/DC welder.

@prometheanconstructionedmonton 6 ай бұрын

Excellent!! Thank you so much for this. I recieved my 250p just a few weeks before this video was uploaded and so I put the AC portion on the back burner due to lack of proper instruction. I couldn't find anything at the time to help walk me through the aluminum side of my 250p, but today I have a project that I can't ignore so I looked again and found your vid. This is exactly what Ive been needing. Thank you so much for taking the time to put this together for us.

@esecarpintero 5 ай бұрын

I’ve been trying to find one of these machines and found out they’re discontinued. I really wanted one and can’t even find any online. I really liked the blue color of the machine😭

@kyleshaub4278 5 ай бұрын

I do enjoy my machine 250p works great

@machukin426 Жыл бұрын

Gracias por fin un video nuevo de yeswelder 250 ac/dc yo la tengo hace 6 meses voy poco a poco practicando aluminio por favor más video como esos!!!!🙏🏻

@YesWelder 11 ай бұрын

¡Gracias por tu comentario entusiasta! Nos alegra saber que estás disfrutando de tu Yeswelder 250 AC/DC y que te gustó el video. ¡Mantente atento para más videos como esos!

@certifiedweldingmsllcalexm5065 2 ай бұрын

Can you explain entire setting for best aluminum wrlding? Same welder. Tks.

@steelworkers78 Жыл бұрын

I don't have experience with Aluminum welding,but thanks for sharing about it friend 💪😁

@YesWelder 11 ай бұрын

@YesWelder Жыл бұрын

Do you guys have any other suggestions or tips to share about welding aluminum?

@esecarpintero 5 ай бұрын

Bring back this machine

@marxcyrus4480 Ай бұрын

Add a second of pre flow.. clean up your starts. I like a 60 degree point sharpened on an Amazon tungsten grinder.. these tips above made a world of difference

@johnmacmillan627 6 ай бұрын

Thx!

@drgibs347 10 ай бұрын

How do you keep the arch going for more than 2 seconds without shutting the welder off? My brand new tig-200p wont arch for more than 2 secs without hitting some sort of shut off safety i guess.

@TheMecano 9 ай бұрын

What is the difference between tig 250p and tig 200p? Is it only the thickness of aluminum that can be welded?

@duttyfarm 24 күн бұрын

I am in Orlando fl and have the yeswelder pro250 tig. I need it repaired. Do you know who I can contact for repairs

@captnjaygreybeard6394 8 ай бұрын

What is good model machine for aluminum/steel for a hobby and small jobs. I don't think this model is available anymore. Thanks,

@WR3ND 18 күн бұрын

🤔 What about titanium?

@efsedan88 10 ай бұрын

The demonstration was very helpful but where is this dudes safety my arms get burnt up with just a t shirt

@michelastegiano7442 Жыл бұрын

on n'utilise pas des électrodes au cérium pour l'alu, mais des tungstènes pures ou au lanthane, et surtout on ne montre pas des conneries sur youtube comme celle de souder en TIG les bras nus, car la peau va être brûlée par le rayonnement de l'arc électrique. we don't use cerium electrodes for aluminum, but pure tungsten or lanthanum, and above all we don't show bullshit on youtube like that of TIG welding with bare arms, because the skin will be burned by the electric arc radiation.

@UpInSmoke54 2 ай бұрын

From The Fabricator "Inverter Machines and Tungsten TIG Welding When inverter GTAW machines came on the scene, they changed everything. The balance control can be set much further toward electrode negative (EN) while still getting good arc cleaning action. Since only a little electrode positive (EP) is used, the tungsten electrode stays much cooler. In fact, the best electrodes for AC inverter GTAW machines are generally ceriated, lanthanated, and rare-earth electrodes, which are all sharpened to a point and can retain the point very well during use. Thoriated, zirconiated, and pure tungsten electrodes are not often used with AC inverter machine"