Buckin did my recipient act today cleaned up a birch tree that blew down for elderly couple free of course

I miss the old vintage McCullouch Buckin. Love you all, get the gullet

Good to see you in the wood with a saws again. Keep healing and don’t push it.

Got my first ever chainsaw this last weekend and learned a bunch from this. I had the exact situation where a fallen tree was flat in the dirt and I wasn’t sure of my approach. Now I know what to do.

I have a 562xp great saw I put a pipe on my 562xp and noticed a big difference definitely helps that saw a lot

The 562xp mII looks a very nice saw and the C85 chain throws nice chips.. Love your videos

That saw was impressive! Husqvarna was smart to let you give it a test, just sharp business planning. Looking forward to trying Scott’s leather treatment also. Just got some today. 👍👍

That sure is a nice saw Buckin, I will always pick a Husky every time. Welcome everyone to the greatest show on earth.

Buckin when I started watching your video's I was learning how to sharing a chain what you just said about leaning on it and equally matching the Rackers to the cutter I don't lean on it any i fine tune it until it falls through the wood it self you are a master to running a saw and sharpening a chain I and other will agree you have help a lot of viewers thanks I run a o tinman special xl76 homelite thanks for all you share and do

Wow that saw is impressive! I started my power saw journey with a little home depot echo 35cc, learned how use a saw and sharpen chains with that one, gave that one too a buddy for his first saw, then I got the echo timberwolf, did a muffler mod and loved that one, beat the crap outta it and never had a issue with it ,sold it and now I run a 362 stihl and love it. But now after watching your videos, I'm thinking of trying out a husqvarna In the 70cc range. I think a 372 xp is calling my name! Stand up and buck! Great videos buckin!

So much good info. I got a notebook and everything. I’m in it for the long haul Buckin’! You’ll see! These vids are great for combatting my ptsd. A lot of other vids get me worked up somehow, not Buckin’ though! From the heart, thank you so much. Also, for what it’s worth, nothing heals the body more than whole organic foods, pure water, a good daily walk in the woods and laughter. Being honest with yourself about the stressors in life is also a key. Keep doing what you love, you’ll be stronger than ever in no time.

That saw pulled that big bar really well for its size

Love the originality of the music for each video !!

I love my 562 xpg !! They’re a great saw for everything big or small

Great video. Appreciate your time and effort and your down to earth dedication.

Thanks Buckin. Love the sound of that beauty. Appreciate the demo and your opinion and will purchase one from my local dealer tomorrow.

Alder ❤ always been one of my favorites for firewood😊

Buckin!!! Glad ta see ya on a powersaw!! The look on your face while runnin them says it all brother😊😊 i am very impressed that 60cc saw pulls that 28 like it does!! I may have to purchase one or two of em to add to the arsenal!! Thanks for what ya do brother, much love🪓🪵🌲

I just got a new 562 XPG Mark 2, 28 inch bar, and running a pos c85 chain, I couldn't be more excited lol

Love it Buckin it all makes since to me brother it didn’t over a year ago but I’ve been learning since then thanks to your teaching and all your knowledge! I’ve always managed to get all my wood cut back then but it sure was a struggle! I would love to see some of the processes on the muffler mod when you do that if possible!

I love my first gen 572, I run a 28 inch bar all the time

Just got myself a new 562 over here in Scotland, loving the content

Happy that you're smelling the 2 trokes gaz❤❤

I love the 562 nice handling saw.

Thanks buckin ,from East TN i love my 562 and 592 but im gonna have to get that sweet spot 572 be safe and thank you bud i appreciate it

Buckin the c83 chain is .50 gauge and the c85 is a .58 gauge. Both have the same X cut cutters. Same chain essentially just different gauge. That’s how I understand it.

Much love Buckin!!

Keep going Buckin! We're not getting any younger!

My favorite dude, doin my favorite stuff !! Gotta love it !!

08:30 "THIS IS HOW A MAN DOES IT" Continues to slice that log like a frikkin salmon! 😂 I'm impressed!

Hey buckin, I gutted the stock muffler on my 562 and piped it. WOW is it a world of difference. Way more power all around, especialy in the midle of the power band. I have a 24" 3/8 .58 chain and it is astonishing to me coming from the world of 40-50cc saws

Thanks for all the wisdom. I love your spirit you bring your the man 👍😃

Nice Chainsaw. Greetings from Germany Peter

I daily this saw at work and I absolutely love it

Husky Sure Was Impressive With Your Skilled Hands B.R. ! Prayers For All Here ! ATB T God Bless

Hey Bucking these 500 series saws from husky are really nice I must say!

You know, I used to be a hard-core stihl guy. Because stihl is just the brand of choice in the area im in but i started watching your videos awhile back and you helped me decide to just give husky a try. I am glad i did because its just a better saw and its fun to listen to a wood cutting budy jabber about how my saw sucks because his is a stihl 😂 Thank you Billy!

Hey Billy. Would love to see your take on how to properly maintain the C85 chain. Love your content, been following your advise since I discovered your chanell and it all works and makes sence. Keep up the great work. Greetings from Poland

So many saws I'm amazed.

As a 362 owner I’m loving this 562 video. I feel like I’d be just as happy with that saw

The 562's are pretty impressive little 60cc saws. I own a few of them and can tell you that a muffler mod really brings them to life.

The 572 definitely looks powerful 👌

Hello from Ireland Billy Ray, just love your videos on everything to do with trees and chainsaws. My first saw was a Stihl 251 and next came an Echo cs621sx and that gave me a thirst for power so now i'm wating on an old Stihl 056av to arrive in the post. But i'm scared Billy Ray because i'm looking at my old Suzuki T500 two stroke and thinking that would make a fine chainsaw.

Man that saw cuts like butter. Wow.

Howdy mr.bucken, outside and just check phone there we go,that 560 I guess is looking pretty good with the long barI know they will pullem,limb😂ed and buck some with the old ms290 but mostly limbed but they will pull that long bar all day!!!! But has its limits lguess,always love the speed and power difference in the 70cc class but always run the 90cc on bucken,not putting the 60cc stuff down at all,that is sweet and a screamer,good stuff as always!!! Knowledge Knowledge!!! As always pleasure! Sierra.John

Hey Buckin, heres a good slogan for a T-Shirt. "When man and chainsaw become one" (for a moment in the moment) Watching you play with that saw reminded me of this variation of the old saying of man and machine.

That's a nice little saw I've got a little older one I run some times

Great firewood saw!

Great point you mentioned: a sharp chain is more important than the name on the saw.

That is running great! I was worried they would be down on power because to my understanding they reduced compression a bit from the last generation that I have. Looks to be running very strong for sure!

BEAST of a saw!Gotta like it!

Can't wait to see what you do with the saw a different exhaust?or maybe a visit to team ripsaw😂 I've got the 560xp I removed the decomp valve and i run a 33 to 1 fuel mix I use Yamahalube 2R a dirt bike mixing oil and it run real good on that more oil more power in these 2 stroke wicked saws ❤

Nice sounding motor

Your the bomb! I’m Just gunna say it…. Much love from little Rhode Island in the states.

This is what a man does! I couldn’t agree more 👍🏻 gets it done! 🇺🇸

I like sthils ,echoes,johsred, and husky I own all of them but I love my husky’s they just tug at my heart

❤Great video as always Thank you for sharing

The king of the saw!👌👏

Great video ❤

C83 CHAIN is .050 guage, C85 is .058 guage. Full chisel X-CUT chain. Awesome stuff.

Great saw ❤

Good to see ya cutting again! Something about watching a chainsaw in action , it's good viewing

Buckin', you are home front.

Glad you're given the 562 a chance great saw for most people well balanced the fuel economy is amazing cut safe my friends

Maybe a smallish saw Buckin but even with that long bar on it cuts fast by my reckoning,specially considering you were cutting alder. Great video and as always good advice. Cheers from HB N Z

Interesting comparisons 🤔🙂

Haha,, wore out my first McC...and then some 090, 066, 044, and brought a BC broke in 066 to Arizona this winter, cutting up some Mesquite, dang, i thought i could file a chain, working for F&G for my carrer on the BC Coast, but dang this Mesquite had me looking at my chain, this stuff is like cutting a C Frame on a D8, but ill get some BBQ charcoal to return to BC with. Alder is like cutting butter, Birch is likr ftozen butter, Maple like wood, but this Mesquite is like a D8 C frame, just it doesn't get dull.

I can’t keep up to all these awesome vids! 😂 🤙🏼

Alder is great to work with. I also like Ash. Splits so easy

Husqvarna is going to make 10s of thousands in return on their investment in giving you that machine. smart business. Another great video, Bill. Thanks. Chris. Hart, Michigan USA

"A pulling chain is your friend" Buckin Billy Ray 2023

simple and effective technique.

I’ve got an old Johnsered and I love it but it’s time for an upgrade. I’m thinking that this is my new saw. Thanks friend

Nice new Chokesystem

Cool ... Strong anoght for a 28 inch bar❤❤

Stay hard folks. Buckin army 🎉

Test all the saws you can. Any size. If they give u for free take it and review. I like any saw you review. I love the info. I think I speak for all we love the information. And all saws has there place in work. And a lot of people got buy 50cc or less we less.

Once again you're saying what a great saw it is and yet you are going to change the muffler! 😊

Some days I supper enjoy buckin wood . Some days I don’t want to even see a power saw . Be I always want a sharp power saw .

i have a 565 its the auto tune version of a 572 for a few bucks less. i got it used and love it so far. need to get dogs and a big bar for it

For me and about 1M other weekend warriors 60cc's is all we need.

Thanks for your time.✌️peace everyone

I have a 562 and i love it. I want a muffler mod on mine. I hear it really wakes up the saw.

Can’t wait for you to start playing around with mufflers. Glad you’re feeling better.

No worries buckin!

Nice little ripper Buckin ! To my understanding C83 and C85 is just the .050 and .058 version of the same tooth design

The god of bucking wood

Ahwoooo love it get one 👍❤️

Nice 😊

It was beautiful today just wish I could smell the fir tree dust. It doesn't grow around here maybe some in North Carolina

Husqvarna every time!💪🤘✌️

Dewalt bar oil is the DGP bio-bar oil available at the HD

Buckin opens the shed, Id say Billy has a little bit of a saw horder issue😳✌️🇺🇸

I’m in CA and if I remember correctly it was about $85 in that area. Shipping from Canada isn’t bad really.

Buckin, heres the skinny on 3/8 x cut chains C83 is .050 full chisel C85 is .058 full chisel S83G is .050 semi chisel C83S is .050 full chisel skip tooth C83SK is .050 full chisel skip tooth, square ground

Cuts like it’s butter Billy 🇺🇸👊🏼👊🏼🪚🔨

C83 is full chisel, .050 gauge, and C85 is full chisel, .058 gauge. X-cut is designed to be round file sharpened after the original factory grind. Enjoy.

Hey Buckin great video. Congratulations and husky sending ya a saw. Qas wondering why you chose 3/16 file instead 7/32? Hope the healing is coming along

I have yet to run a 5 series saw, I'm kinda partial to the 2 and 3 series. If I could only have 1 saw in the 60cc range it would be the 266.

462 was ripping good size birch tree