No video

RCGF 10RE

  Рет қаралды 5,177

Brian Winch

Brian Winch

Күн бұрын

This is a very tractable engine in all respects. Super easy flick (hand) start hot or cold with no bites or kicks. I swings a broad range of propellers as I used on the test staring with an 11 x 7 up to a 15 x 4 with no strain on the engine. You will note the mount which I have modified to allow it to flex rather than impose a strain on the engine with a totally rigid mounting.
Enjoy seeing and hearing it running and pay particular attention to the very low and really reliable idle - it just kept going and going...
Wholly recommended by Brian Oily.

Пікірлер: 3
@paulwright8532
@paulwright8532 6 жыл бұрын
Hi, Brian - thanks for the review of the more recent RCFG release. Just got one of these, and the only issue(s) I foresee are throttle & choke linkages. Throttle arm can be drilled for better linkage alignment thru firewall, but choke linkage is problematic - with choke arm directly behind the cylinder head, making push-pull rod thru cowl a bit of a challenge. It'd work well with a servo-operated choke rod mounted behind the firewall, I guess - but that's one more thing to fuss with...
@RC_Sky
@RC_Sky 6 жыл бұрын
Hi! What trust you was able to get and what prop is the best?
@BrianOilyEngines
@BrianOilyEngines 6 жыл бұрын
Yo Tempqa As you can see in the video, my test stand is solid - non moving so no thrust measurement which, really tells you little as static thrust (on the ground) bears no relationship at all to the thrust on the air as there are so many variables such as the type of model. No best propeller - all the propellers I used are listed above and, again, it depends on the model as to what propeller you use. If you want speed you use a large pitch, small diameter propeller. For pulling lower (large model at scale speed as an example) you use a large diameter, small pitch propeller. Buy the engine for yourself, you will enjoy it. Regards Brain Oily
RCGF 21 TWIN
6:06
Brian Winch
Рет қаралды 12 М.
RCGF Stinger RE 10cc
2:37
Lasse Hellsten
Рет қаралды 13 М.
SAITO FG19 R3 TEST
6:09
Brian Winch
Рет қаралды 16 М.
RCGF 10cc Electrical and Fuel
10:47
Ken Schroeter
Рет қаралды 16 М.
See Thru Jet Engine
10:14
Warped
Рет қаралды 15 МЛН
Installing Gas Engines on Beam Mounts
3:22
thintz12
Рет қаралды 24 М.
EVOLUTION 10 PETROL Copy
3:57
Brian Winch
Рет қаралды 9 М.
Motor RCGF 10cc Carburador DIFÍCIL de AFINAR #aeromodelismo
4:12
RCGF 10 TEST
5:37
Brian Winch
Рет қаралды 28 М.