BEST Subaru clutch How to Replacement Part2 briansmobile1

Рет қаралды 32,461

5 жыл бұрын

BEST Subaru clutch How-to Replacement Part 2 Getting the Trans off the engine. briansmobile1
S-wrenches → amzn.to/2Ertl1D → The “Ibis” → amzn.to/2U2o324
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Wanna chance to see your hat, shirt, sticker etc in a video?
Send it to:
briansmobile1 P.O. Box 282
Cedar Valley, UT 84013
Pull-a-Part Challenge video 3 → • The Pull-A-Part Challe...
Thanks for watching my videos. I hope they've helped you tackle something you thought was a challenge and left you feeling like a FORCE for win! And if nothing else, perhaps you had a laugh and were entertained!
Disclaimer:
Training and discretion is recommended before attempting anything portrayed in this video.
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and reputable gear when paramotoring.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.

Пікірлер: 44

@schmidty3489 Жыл бұрын

Easily the best 2 videos for this gen Subaru I have seen. Thank you a bunch

@Chris-Fennimore 5 жыл бұрын

Thanks Brian. Yep, Its easy enough, I'll pull the H4's right out to work on anything. Good video.

@noahg2788 2 жыл бұрын

This is the exact video I was looking for! Finally someone with an easy and well explained clutch swap thanks so much

@AntonioClaudioMichael 5 жыл бұрын

Great walk through brian like always brother

@vmlinuxz 5 жыл бұрын

In thousands of years they will dig up your clutch string and wonder what kind of cultist ritual it was used for.

@briansmobile1 5 жыл бұрын

I does look like that doesn't it!

@AntonioClaudioMichael 5 жыл бұрын

Lmfao

@HOOD2358 3 жыл бұрын

Yeah I'm pulling the engine for sure. Seems much easier. Only done it once before but I feel confident. Thanks for the info Brian

@holdencooper4205 3 жыл бұрын

Thanks for the videos! Watched over a few times to pick up the tips and carried out my own clutch/flywheel change recently with out too many issues. Mainly separation of the block and realignment of gear box back on after... several tries later and remembered to use the driveshaft to rotate the gearbox slightly, went straight on after that!

@briansmobile1 3 жыл бұрын

Welcome- love to hear it. Way to go!

@racerdaveracerdave 2 жыл бұрын

This is money. I did one and this is a great guide that I wish I had.

@jaybee4694 2 жыл бұрын

Dude. Thank you!

@Dymundback 2 жыл бұрын

My little '02 RS had it's fifth gear stuck to the gearshaft, I had to pull it out only to have the gearbox housing snap right where the throw-out bearing sits. Just had myself grab a used cogbox from an Outback that has gone pretty long miles. Hopefully that will live longer. Both are separate as of now so it's a perfect time to change out for something with a little more grit to it. Better flywheel, clutch disc and bearing are looking real nice of the digital shelves.

@AntonioClaudioMichael 5 жыл бұрын

Lol love the clutch guide bundle ring

@mikerivera654 4 жыл бұрын

Great videos!! Again great and very inspirational informative videos. The only thing I would add is to emphasize breaking the seal on the bell housing of the motor to transmission. As I had to pry mines apart, both dowel pins stuck to the transmission. Don’t be afraid to use a wedge to separate. Good stuff Brain and thank you......

@briansmobile1 3 жыл бұрын

Thank you and you're welcome! I love to hear that it helped!

@AntonioClaudioMichael 5 жыл бұрын

Moving transmission and engine is hardest part of a clutch I agree

@tonyw3250 3 жыл бұрын

Yes I'm happy, I've done plenty of clutches in my life, but no way I'm doing my Subbie after watching this

@briansmobile1 3 жыл бұрын

To each their own. I was hoping it would inspire and instruct, but hey, that's all I can hope for.

@tonyw3250 3 жыл бұрын

@@briansmobile1 Don't get me wrong it's a great video and i would use it 100% if I was doing the clutch, I just didn't know it was that bigger job.

@1970chevelle396 5 жыл бұрын

There must be lots of Subaru's in Utah. Here in California I've only worked on two of them before. Even though the Subaru dealership is right on the other side of the freeway, I don't see very many of them.

@fleet1779home 10 ай бұрын

If a red bearded mechanic starts quoting the Pareto principle of 80/20 …I’ll likely listen! Great vid man!

@theadventuresofjavier8698 5 жыл бұрын

As the Marine said in the movie "men in black" the best, of the best,of the best...SIR! Thanks B

@briansmobile1 5 жыл бұрын

Wow! Thanks for that.

@Mayamax3 5 жыл бұрын

With honors.

@ozzstars_cars 5 жыл бұрын

Yup, yank the engine forward. Seems like you got a new jacket Brian, that thing sounds crunchy when you move your arms. lol

@steveromeocars 5 жыл бұрын

Nice vid. I changed my clutch 1 month ago, now I broke my transmission with the new clutch kit. I have already removed the gearbox, but the throw out bearing just sits on the clutch now. How can I remove it to put it on the transmission? Or can i put the transmission on it like that, and then put the fork on the throw out bearing from the top? Would be thankfull for every information.

@AntonioClaudioMichael 5 жыл бұрын

Exhaust ends you talking about the y pipe or the x pipe on a dual exhaust vehicle?

@tommygomez5343 3 жыл бұрын

Did you have to loosen up the 2 bolts on the clamp in the center of the turbo to finally get the transmission apart?

@jayfajardo9836 3 жыл бұрын

Hi mr brian. Subaru sti replaceing clutch assembly should be remove fork clutch shaft?

@jessetimm4809 4 жыл бұрын

Hey thanks for the videos they were extremely helpful doing and tackling my flywheel and clutch in my 2012 WRX now I have a question my front driver side axle seal is now leaking I watched four different videos just pop the axle seal out with the tool that I have or do I actually have to spin that piece out and yelled that controls the backlash and put it in from the back side because the videos I watched show is all being done a different ways and I would trust your advice over there thank you

@TheNightrain05 4 жыл бұрын

Just saw your post as I am having an issue with my front right CV. I noticed a circular coil spring with a flat edge like a retainer that popped out but I could not see where it went back for re-install. It has to go in the transmission and act like a seal. The same spring was hanging on the shaft outside of the RT axle. Subaru dealership at its best. Brian if you see this 2 of your followers are having an issue with the RT side axle

@AntonioClaudioMichael 5 жыл бұрын

Re installing transmission can be a pain also

@miriamvivo4279 5 жыл бұрын

If I may ask what brand of clutch kit looks oem.

@mahmoudsy9901 Жыл бұрын

شكرا

@darrylmcleman6456 5 жыл бұрын

Were you visiting us in Canada recently??? Just wondering about the hat with Canada in bold black.

@briansmobile1 5 жыл бұрын

It was a gift someone got me. I have family there.

@dr.michaeltulloch2166 Жыл бұрын

Dealer is charging me $700 for clutch and throw out bearing. Diagnosed the flywheel needs replacing without looking at it (no vibration drove it into shop), Wants $3000. I'm felling pretty screwed. Told them no friggin way. Just do the bearing and clutch plate. They should do the pressure plate too for $700. A clutch kit with everything is under $200.