Bridgebort Milling Machine [Rescue]
Рет қаралды 1,309,318
3 жыл бұрынIt is time to bring my 1960s Bridgeport milling machine back to life! This is a 100% genuine clapped-out mill that I picked up about a year ago. I always hated the horrible white paint job someone did on this machine, so that needs to be fixed. There are also several worn, missing, or completely broken parts that all need attention. This isn't a full restoration, but more of a "rescue".
I first needed to remove all paint and body filler, which there was a lot of! Then I needed to install a new quill spring and make new cam ring pins, a new quill lock handle, and install new measuring indicators. Someone converted this mill to use grease instead of oil, which is blasphemous, so all oil lines needed to be fully replaced with ACTUAL oil in them.
I decided to not paint the mill at all and leave it completely bare metal. This matches the look of the tools in the rest of my shop and makes it easy for me to add paint later if I feel like it.
I took everything related to the axes apart, but I did not disassemble the head, as I wasn't planning on replacing any worn parts in it.
Overall, the mill is in an average condition and I think some bronze wear components will need to be replaced within the next 5-10 years depending on my usage.
I am not a machinist aiming for high levels of accuracy, so as long as the tool can get the job done, I am happy for now.
Wrenches and screwdrivers are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue
Podcast (with Jimmy DiResta and Andrew Alexander) - anchor.fm/fitzall
@HandToolRescue 3 жыл бұрын
BRIDGEBORT!
@Toaster278 3 жыл бұрын
That's my favorite brand of cereal
@barrishautomotive 3 жыл бұрын
We need more Bort license plates in the gift shop. I repeat, we need more Bort license plates in the gift shop.
@mikeyzs 3 жыл бұрын
Made me bridgesnort
@johntoves9015 3 жыл бұрын
Yes!! You went with it!
@JohnnyParanoid 3 жыл бұрын
Sounds Swedish!
@arduinoversusevil2025 3 жыл бұрын
Now that you've practiced; I'll send you my old girl for your tender ministrations.
@HandToolRescue 3 жыл бұрын
Anytime! Is it the Bridgebort version? Those flat rate boxes aren't too expensive now...
@scolt5669 3 жыл бұрын
HTR... Can you also resto AvE’s work bench? It’s kinda janky.
@loganbartlette3635 3 жыл бұрын
Knew you'd be here
@chronokoks 3 жыл бұрын
@@scolt5669 If you look for janky in dictionary, AvE's picture is there.
@davcar72 3 жыл бұрын
Now let's give AvE a little pass here. You know he's gotta take care of Babydoll and 2 mini-me's. Janky? It any janky if it works.
@brianewhiteguy 3 жыл бұрын
I work in personal finance and have just learned a new term: "Violently expensive". That will now be integrated into most client conversations. Thank you!!
@kenwhite5132 3 жыл бұрын
I like that phrase my self... (Violently expensive) Thanks for the new phrase dude....
@brianewhiteguy 3 жыл бұрын
@@kenwhite5132 Great name, by the way. My grandfather was also named Ken White :)
@gtown1742 3 жыл бұрын
@@kenwhite5132 you have to be careful if something is violently expensive! If it stabs your wallet you might start hemorrhaging money!
@clayz1 3 жыл бұрын
You can work violently expensive into a boilerplate clause somewhere.
@deletesoon70 2 жыл бұрын
Lawyers should be forced to use the term, it would clear up court backlogs quickly.
@JuliaKadauke Жыл бұрын
I like you talking while working. It’s easier to listen than to read.
@WrenintheRoses 2 жыл бұрын
I love that you chose to clear coat the raw iron and steel on your Bridgeport rather than repaint it. It’s beautiful that way.
@BlackBeardProjects 3 жыл бұрын
Yesss!!! Thank you Mr Bridgebort 🙏 much appreciated and much sensual narrating. Can't get any better ❤️
@HandToolRescue 3 жыл бұрын
Anytime lover.
@martinchiarelli2582 3 жыл бұрын
A BBP video, a Hand Tool Rescue NARRATED video, and a Binging with Babish video all on the same day. Slow down boys, my birthday is in November!
@elliotwitkowski6098 3 жыл бұрын
@@HandToolRescue your next narrated video should be ASMR. Your velvety tones are prefect for it
@fengelman 3 жыл бұрын
I was so surprised by the narration, for some reason, I was expecting some crazy foreign accent LMAO
@rbmk__1000 3 жыл бұрын
@@fengelman really you can't hear it? My ears are practically filled with maple syrup.
@seanhazelwood3311 3 жыл бұрын
As a little tip, when using Loktite on press fit items, use Green Loktite; it's specifically made for that.
@jr798 7 ай бұрын
Looked like he was using a Permatex product. One of their high-strength products for press fit applications is red. It's better to state a specific formula than refer to the colors alone.
@seanhazelwood3311 7 ай бұрын
@@jr798 Probably why I said Loktite, which is identified by number And color.
@Bamshi101 3 жыл бұрын
The lettuce seed packet cured me of my depression for a good 30 seconds there, thank you
@-_IT_- 3 жыл бұрын
You remind me of This Old Tony with your humor!! Random humor is always great!!
@ThePostApocalypticInventor 3 жыл бұрын
Nice! Great job! I'm starting to restore an old lathe this weekend and I guess it would only make sense to also get a milling machine like that for my shop sooner or later! Keep 'em coming!
@FaskaRestoration 3 жыл бұрын
Hätte nicht gedacht dich hier zu treffen.
@FOOKYOUTUBENUMBERS 3 жыл бұрын
Your videoing it I hope?? Or that stating the obvious
@fourkings7897 3 жыл бұрын
Can't wait for lathe restoration
@sheep1ewe 3 жыл бұрын
Nice! I look forward to that! But take all the time You need with the projects mate, Your life is more important than a regular upload frequency, we won't go ayay!
@sofa-lofa4241 3 жыл бұрын
They are like drill presses.... Addictive! 1 is never enough... 5 or 6 is about right
@drain_001 Жыл бұрын
Having worked on MANY filthy Bridgeports, half of which had the quill lock handle missing, this video is so incredibly gratifying. Thank you!
@richardbell9656 3 жыл бұрын
During late 60's early 70's, I was an apprentice at a company called Adcock & Shipley based in Leicester, England. We made and built Bridgeport machines under licence. Very well made and super versatile.
@WesleyWestland Жыл бұрын
I still use an Adcock-Shipley Bridgeport regularly! It’s owned by my student rocketry team in university, not in a fantastic state but still going strong. We’ve only had it for a few years, I believe it was previously owned by a hospital but I’m not sure what they used it for. I’m also not sure exactly how old it is but we like to joke that it’s been around since before the Moon landings!
@richardbell9656 Жыл бұрын
@@WesleyWestland my apprenticeship consisted of first year in training school then three years on the shop floor in different departments eg. lathes, milling,drilling and toolroom. At one point I was operating an early CNC Bridgeport,producing the faceplate for the variable speed Bridgeport head. It was converted to cnc by a company called MOOG. The command centre was a punch hole reel to reel loop paper tape. No automatic tool changers in them days. Two workstations on the jig and the spindle had a quick change tool holder similar to a chuck and key. All tools were preset. It ran 16 hours a day,5 days a week without a single problem. Also produced a beautifully presented,boxed up,boring head attachment specifically designed to enhance the versatility of the Bridgeport.
@WesleyWestland Жыл бұрын
@@richardbell9656 Interesting stuff, didn't know CNCs were around back then. By faceplate do you mean the bit with the rotating dial for the spindle speed on it? I've looked up the type number on ours and it was made in 1974, so who knows it might be one of the ones you worked on! :)
@richardbell9656 Жыл бұрын
@@WesleyWestland Yes Wesley , that is the part you described. You never know, it maybe a part that I produced. The Bridgeport was so versatile that they were sold worldwide. Talking about early years CNC machinery, on the shop floor, we had 3 auto lathes that produced the collet tool holders for the Bridgeport head. The lathes were made by a company called Ward, based in Coventry England. The command and control centre was a plugboard, similar too an old fashioned telephone exchange. Just feed the it steel bars and away it went.
@johnnyshockley6133 Жыл бұрын
Richard, just purchased an Adcock-Shipley Horizontal milling machine. That is one fine quality machine you guys built for sure!!
@Sawta 3 жыл бұрын
Vlogger talks in video: "Yeah, makes sense." Restoration channel talks in video: "Whoa, *what!?* I wasn't entirely sure they even had vocal cords. Weird!" Love the videos. :) keep up the good work!
@jogden6632 3 жыл бұрын
"Food for children" nearly had me choking on a large piece of ice in my drinking glass, haha! So friggin' funny!
@jacobogden6710 3 жыл бұрын
Is this another Jake Ogden following his channel?
@jogden6632 3 жыл бұрын
Wow!
@mauricepowers8079 3 жыл бұрын
Yeah...I lost it on that too...😂😂😂
@zband9016 3 жыл бұрын
Next episode: Pool in the back yard is full of Evaporust and the gantry crane is lowering the Bridgeport in whole.
@pauldery7875 2 жыл бұрын
I've been a machinist my entire life, working 50 year, and I love it.
@Cr30s 3 жыл бұрын
Just saying, the narrated version of this video explains a lot on how the Bridgebort works (not a typo, you have to listen to the narration to get it). Maybe think of giving the patreon a try. And yes, Hand Tool Rescue is forcing me to sell it to you ;)
@GeneSimonalle 3 жыл бұрын
I too am completely not under the mind control of the HTR Overlord...[...must... comply, must... obey ...Maple ...Syrup] and the narrated Patreon videos are superior with the soothing tones of narration.
@testbenchdude 3 жыл бұрын
It's so worth it. I'm an OG sub but as soon as he released his first narrated one on YT (early last year I think) I immediately threw down for the Patreon.
@PoignantPirate 3 жыл бұрын
I prefer the versions without voiceover. I'm slightly disappointed that he's not just keeping the narration behind patreon, but is now apparently intending to restrict major jokes/important context as well.
@aserta 3 жыл бұрын
He let you out of the basement? Damn, someone's being a teacher's pet. ;)
@littlejackalo5326 2 жыл бұрын
@@PoignantPirate people watching this channel generally want to learn. There are plenty of "oDdLy SaTiSfYiNg rEstOrAtiOn" videos for you to watch. They're probably more your speed anyways. They go at 4x speed, don't show you too much extraneous material, and show you the process from start to finish in 12 minutes. And there's no fear of learning anything. It's a win-win for you.
@dr.richardkimble 3 жыл бұрын
"If we're plus or minus 100 kilometers, I'm pretty happy." 🤣🤣🤣
@GatGabit 2 жыл бұрын
"I'll slap this goop on by gooping it all over" is my favorite explanation for applying paint thinner ever. 7:30
@chief7174 3 жыл бұрын
No paint? Great choice. Show this beauty off. I am addicted to this channel lol.
@Ioughtaknowbetter 3 жыл бұрын
As a guy who has spent a LOT of hours spinning handwheels on Bridgeports, Bravo! Very nicely done. Not an extensive, high precision restoration, but making a nasty machine nice, and usable.
@sorchard6 3 жыл бұрын
The threaded hole at the end of the table is for cooling fluid to leave the table. You may have a tank in the base with a filter and pump to pump suds up to the tool. It then returns via a line in that hole. You may not of course, model depending probably.
@HandToolRescue 3 жыл бұрын
Well that makes sense.
@namAehT 3 жыл бұрын
The 83 everywhere was probably to match components during assembly. Some things might be lapped/machined to match rather than a specific dimension.
@Beef4Dinner22 3 жыл бұрын
@@namAehT that was my thought too. Maybe the last 2 digits of the serial number? 2 digits would likely be enough that you wouldn't run into overlap in production where 2 tools on the line had the same numbers stamped on the parts.
@qshed 3 жыл бұрын
would also have a catch tray round the base. pump sits in the Bridgebort port door. and a coarse filter in the base of the machine
@BlackPeter203 3 жыл бұрын
@@HandToolRescue Also FYI, all those grease fittings should be tube fittings that all lead to a central pump oiler. It would be mounted on the base and every so often you lift the handle and it feeds a bit to every fitting.
@DaxRaider 2 жыл бұрын
This was delightful. Thanks for taking the time to document the process
@wesley9761 2 жыл бұрын
I spent 30 years running Bridgeports in various shops, ending in 1996. Nice trip down memory lane as you described the various controls. Had the opportunity to replace the cross nut on one of them, brought back the good old days watching you do it.
@snargmuffin2026 3 жыл бұрын
That little hole in the table is actually a coolant drain hole, not for clearing chips. The coolant flows down the t-slots and out the hole in the side back into your coolant reservoir.
@mauricepowers8079 3 жыл бұрын
The hole works great till it plugs with chips...😂
@BlackPeter203 3 жыл бұрын
Nice, came here to say the same!
@streaky81 2 жыл бұрын
Me screaming the same at my screen :) Although in theory it should take a bunch of chips with it..
@mauricepowers8079 2 жыл бұрын
@@streaky81 all depends on the size of the chips.
@streaky81 2 жыл бұрын
@@mauricepowers8079 I assumed that went without saying :)
@lesleyyoung5730 3 жыл бұрын
I don't know what awards KZfaq gives to content makers, but someone please, give this man one for BEST OPENING! I would love to see him, in keeping with 'that' guy, continue the character throughout the whole video. 😃Hell, he should make a second channel and have it be nothing but farce and screw-ups! 😄
@derekreed8251 3 жыл бұрын
Excellent. The metal finish looks great, even with the casting pits. Many more years of fun with the machine now.
@mcdugalmcstiffy6889 3 жыл бұрын
I've spent years using Bridgeports, a nice trip down memory lane. Thank you.
@primoed77 3 жыл бұрын
I would love to see you take that history of chips that fell out and maybe pick out some really cool chunks, throw it in a cup, resin, turn that and boom, you got a handle made from its own history. Every time you touch that handle you'll connect to that machines past and it's its way of taking you for giving it life again.
@chrispile3878 3 жыл бұрын
Outstanding idea, Emilio.
@dougscott8161 3 жыл бұрын
Thank You for doing a full narration on this video, it makes it much easier to follow exactly what you're doing. I didn't realize that most of those grease zerks were supposed to receive oil instead of grease, I would have just used grease in all of them. I'm having trouble adjusting to the sight of an unpainted Bridgebort, but its your machine, so do it the way you like.
@rokronroff 3 жыл бұрын
I really enjoy you talking through restos to see your process
@Large_Sarge 2 жыл бұрын
I love the vocal description that goes along with the process of repairing this milling machine. Great work. Thank you for sharing.
@thelos3999 3 жыл бұрын
Wow can't believe that rust remover is still working. It is as black as grease but still does its job. Respect to vaporust
@hammuffins2645 3 жыл бұрын
I really quite enjoyed the vocal overlay. I definitely enjoyed listening to you talk about what you were doing and explaining why. If you continue to make videos like this, I will for sure be watching the videos while awake and not going to bed. The asmr is insane when you go to bed while listening to HTR.
@hisxxx2 3 жыл бұрын
The yule log / toothpick video is the best go to bed video.
@BrooksMoses 3 жыл бұрын
Subscribe to his Patreon! He does narrated versions of everything, but most of the narrated versions are patron-only.
@ablemagawitch 2 жыл бұрын
Wow! Amazing educational restoration and explanation of what the parts of the mill are.
@Verdandi_P 2 жыл бұрын
As a Machinist myself I must say, 10/10 GREAT VIDEO! Out of all the videos I seen on KZfaq about these machines yours is by far the best! I love how you seamlessly transition from point to point about the machine. Am happy that this machine has found a great home and a great owner!
@sgsax 3 жыл бұрын
Long live the Bridgebort! Judging by that chip collection, this machine had seen some things. Voiceover is a nice addition on this one. I've been following the progress on IG, but it's fun to see the finished product here. Thanks for sharing!
@jrgarciaole 3 жыл бұрын
I don't know why, but I always imagine that Ray Romano is narrating and it makes me joyful. 😊
@CrashRacknShoot 3 жыл бұрын
Soothingly nasally.
@if66was99 3 жыл бұрын
Man! I've run a lot of Bridgeport's in my time. GREAT little machines. You can do SOOO much more with them than they're supposed to do!
@ibrahimab6896 2 жыл бұрын
Love the narrating. Gives great perspective to people like me who have no clue about machining but enjoy the process, thanks.
@Slayerformayor1983 3 жыл бұрын
My naughties get all tingly when a new htr video hits my feed
@Laundry_Hamper 3 жыл бұрын
Heaven is a full HTR narration. Doubly so when it's a brickin' BRIDGEBORT. This is a better format than a grillion IG stories!! 😅
@philipershler420 3 жыл бұрын
Having spent a considerable amount of untrained time on a very similar Bridgeport, I really enjoyed your guided tour through this beautiful machine. I totally agree with you about no paint. It looks wonderful in its birthday suit. A very excellent rescue of a special piece of machinery. I’m sure it will give you many years of enjoyment.
@HardRockWorkshop 3 жыл бұрын
Great job ! Both my father and grandfather worked for Bridgeport in the 60’s and 70’s and I served part of my apprenticeship on one - fond memories and one day I’ll get one in my workshop !
@dpmakestuff 3 жыл бұрын
This was delightful. Thanks for taking the time to document the process!
@donparker8246 3 жыл бұрын
I logged on this video and my first thought was,"YAY, WE GOT A TALKIE!!" I like the raw metal look also. Good looking machine! 😎👍
@danielcotnoir3363 2 жыл бұрын
That was a lot of fun to watch! Thank you for sharing the process.
@usethenoodle 3 жыл бұрын
What a delightful video! I love the narration. Thanks for having us along.
@bobferranti5222 3 жыл бұрын
This restoration was extremely gratifying to watch.
@JustinLaNoue 3 жыл бұрын
That’s literally the nicest Bridgebort I’ve ever seen…
@ronmack1767 3 жыл бұрын
Enjoyed the video, especially the narration of the whole rebuild process. Thanks for taking the time to produce the videos. Y'all take care and God bless.
@peterparsons3297 3 жыл бұрын
Love to see these old machines rescued and given a new lease of life after all their years of hard work, been after one myself for years but quite rare and very expensive over here in the uk
@Lex4122 3 жыл бұрын
Fucking finally! I have watched a few Bridgeports being restored and you actually didn´t screw it with some ugly paint. It looks awesome now, great video!
@connosps4656 3 жыл бұрын
bridgeborts*
@PatrickPease 3 жыл бұрын
Gonna paint mine neon orange 🧡🍊 with black pinstripe because mechanicool
@MisterRorschach90 3 жыл бұрын
@@PatrickPease no. If you paint it the only color you are allowed to choose is that hammered blue mint teal color, black, or poop brown. Come on.
@Lex4122 3 жыл бұрын
@@PatrickPease I´ve already seen one in baby pink... so do what you must, for i have already lost
@Lex4122 3 жыл бұрын
@@connosps4656 bridgeborts of course, my bad
@victoriaeads6126 3 жыл бұрын
I really like your videos! I keep sending them to my dad, too, he really enjoys them. This is the first one I've watched where you ace narrating. I love your dry sense of humor. 💜
@Soulessdeeds 3 жыл бұрын
The voice overs seriously make these videos better. Thank you sir.
@BillySugger1965 2 жыл бұрын
Very sweet video, I learned plenty about milling machine basics as well as Bridgeport restoration. And your commentary is so much better then the captions on older videos. Thank you for adding that.
@MrLuisFilipe61 3 жыл бұрын
The end result looks really good and appropriate for the workshop! The "oil finish" on the whole body of the machine would be my go to option as well!
@pamdemonia Жыл бұрын
That is one hell of a magnificent machine! I'm so glad you didn't paint it. It looks like an absolute beast.
@djAnakin 3 жыл бұрын
Beautiful machines! Love seeing these refurbs!
@fasteddie4107 3 жыл бұрын
Nice repair work. I really like the look of these natural metal finish. Thanks for sharing this.
@edgoldshinsky1848 3 жыл бұрын
Fantastic!! The “Naked “ look is spectacular. Great job 👏
@pjhalchemy 3 жыл бұрын
Terrific voice over work HTR! Glad you got this up to your needs & speeds and can't wait to see what you do with it. Amazing find on the Shaping Attachment, only seen one other in 60+ years...back in 68' at a family friends gunsmith shop. Congrats HTR, well deserved! Now for some tooling. ;-D
@Maker-G 3 жыл бұрын
Lovely restore, the raw cast iron surface is gorgeous, I am a big fan of displaying the natural base material. Excellence!
@GooseGosselin 3 жыл бұрын
Narrated, nice. Well done, hope to see this used in many more restorations!
@captainjerk 3 жыл бұрын
The technical term is "clapped-out" LOL :D
@gregmurray1918 3 жыл бұрын
That phrase was stuck in my head, too
@gorak9000 3 жыл бұрын
Good ol' uncle BF
@Sad-is-dick 3 жыл бұрын
No its "Shes fuckered"
@RenaxTM91 3 жыл бұрын
No, cause its not. HTR's Bridgebort is almost like new....
@MisterRorschach90 3 жыл бұрын
I am so glad you didn’t cover that beautiful machine in ugly new paint. You literally have the most beautiful Bridgeport on KZfaq. Maybe paint the lettering a to make it pop. Or brass it.
@ronsampservice3066 2 ай бұрын
I've used many of those old Bridgeport mills over the years. Excellent machine tool.
@naldahide 2 жыл бұрын
LOL! "It's quite thrusty.." You made me spit my coffee and laugh! Good show ole chap..!😄👍
@korgan7779 3 жыл бұрын
Great video and work as always! I agree that the raw cast iron is beautiful. I feel like you should cast resin all those scrap shavings of history from the Machine and then Mill the resin block into a handle for something on the Bridgebort or for handle scales on one of your screwdrivers. Also waiting for the video where you lower an entire large project piece into a giant vat of evaporust using an old restored powered wench controlled by turn levers that are just your remade wrenches!
@kitmaira 3 жыл бұрын
I enjoyed this very much. The narration makes it even better. Love that you chose to keep it metal rather than paint. I really want a Bridgebort in my shop someday. Unfortunately they cost as much to move as buy.
@dreamymaccready2287 3 жыл бұрын
you have a very creative definition of what a hand tool is
@AlphaMachina 3 жыл бұрын
God, I love everything about this. Repairing/restoring vintage equipment is the most rewarding thing. Edit: Looks better without paint. Now you can tell people you keep a "naked Bridgebort locked up in your workshop."
@lucaortolani2059 3 жыл бұрын
"I have small kids" Hand Tool Rescue is a DILF confirmed
@HandToolRescue 3 жыл бұрын
Hahahaha.
@macmac19800 3 жыл бұрын
Food for children, just a movie at lunchtime. I was wondering what to cook, thank you and I'm waiting for more culinary ideas :-)
@hoofhearted1902 3 жыл бұрын
This whole rebuild is uber thrusty! Very nice.
@ringkug4492 2 жыл бұрын
Wow, looks so much better raw, sweet job fixin her up! Love the "thrusty" attachment also.
@bgdavenport 3 жыл бұрын
Removing chips from the sides of the table was always a hassle for me even with a vacuum. I made a custom fit tray with a lift handle out of perforated steel to fit that space. I could easily lift the chips out! The hole you identify is threaded, not for chip removal, but for attachment of a lubricant drain tube. Makes that chip removal tray even more efficacious!
@dhgodzilla1 3 жыл бұрын
The assorted Chips from the Machine would make a good underside to a Coffee Table covered with Epoxy
@fredericapanon207 3 жыл бұрын
Or even cast an epoxy slab with the chips embedded in the epoxy
@thesledgehammerblog 3 жыл бұрын
Murdertable?
@michaelrogers4157 3 жыл бұрын
@@thesledgehammerblog That name instantly came to my mind as well. A murdertable to place the murderbowl upon!
@jimbayler4277 3 жыл бұрын
Hey-y-y-y-y-y !!! .... "Lightbulb " ....... !!!
@pamelasteburg6006 2 жыл бұрын
I totally agree it looks very nice unpainted! You did a wonderful job on it. I totally dig your videos!
@Mr11mrdk 2 жыл бұрын
I find it difficult to criticize a person with as many KZfaq views as you do. That said - I love to watch your videos. I see how you work and your knowledge. What I don't like is bigger nuts, bolts, and screws......! They should be replaced. Now all the above is on your rescue projects. I was pleased to see you rescuing the tools the do the work. I would think you would make them "perfict" showing appreciation and the respect they deserve. It was also an opportunity for you to show your viewers your skills level. Thank you for your videos.
@kvsteve 3 жыл бұрын
ARGGGGHHHHH! My ears!!!!! CANADIAN!!!!!!!!!!!!!! p.s. Excellent video as always. I fully support the naked look.
@thegakatac 3 жыл бұрын
This was satisfying in ways that i should probably be ashamed to admit.
@lmandrakepoe 3 жыл бұрын
The Bridgeport factory on Lindley Street was very familiar to me as I drove by it for many years. My best friend's father was Magnus's nephew, I believe--a man referred to as a trouble-shooter for the company after it was sold to Textron. As boy scouts he brought the troop to the facility and showed us the rows of machines in production. There was also a museum-like room that had a series of machines, I'm guessing to trace the lineage. That was in the early seventies. I wish I could have appreciated the genius of that machine as a kid, but I watch your videos with gratitude for your technical knowledge and your willingness and ability to bring that machine to life for future generations.
@SpicySteve-tz2so 3 жыл бұрын
I was feeling depressed and lonely. I stumbled upon your video, and having run a BridgeBort as far back as 1990, I was instantly captivated by your smooooooth jazz voice and gentle vocal vibrations. Subscribed! Thank you HTR!
@SeanHodgins 3 жыл бұрын
I thought you were just painting on oil at first. Bridgebort.
@pablowentscobar 3 жыл бұрын
"You're gonna do a lot of screwing and everything is oily." Nice.
@CrashRacknShoot 3 жыл бұрын
Nice.
@jonanderson5137 3 жыл бұрын
Nice.
@littlejackalo5326 2 жыл бұрын
Oiled. Other PH connoisseurs will know.
@websitesthatneedanem 3 жыл бұрын
Wonderful work, very calming to watch.... thanks for posting! 🙂
@howardoller443 2 жыл бұрын
LOVE your work! You did a great job. God has blessed you with great abilities. Your narration is a perfect fit.
@RinoaL 3 жыл бұрын
Oh this was a nice one. I'm getting close to restoring some of my own things i've personally worn down lol...
@HandToolRescue 3 жыл бұрын
It never ends...
@horacegentleman3296 2 жыл бұрын
Hey Rin
@OSUCharger 3 жыл бұрын
Oh hell yeah. Nice! AvE will love you.
@cspotrun66 3 жыл бұрын
I'm loving the commentary. Happy to hear your voice and humor. Keep doing it from now on - it really adds to the video and your so educational. Keep up the great work.
@CS_247 2 жыл бұрын
Best milling machine ever, I have two!! One is ancient, the other is more modern with 3 axis DRO on it. Love them both.
@jjbrown675 3 жыл бұрын
Looks so much better unpainted! Sometimes when I use paint stripper I'll use sawdust to scrub with. It soaks up the goop and works great for getting into nooks and crannies, like absorbent steel wool.
@JDnBeastlet 2 жыл бұрын
I love your channel and your projects - this one's a biggie! Your videos are well produced and your sense of humour is excellent. Count me in as a new subscriber. :)
@km5lb11 3 жыл бұрын
I think your machine looks great and reminds me of the old machines my dad used in the machine shops he worked in.
@richmonk508 3 жыл бұрын
I have been thinking about where to plant Lettuce this year, and now you have given me the idea of planting them in my table saw!
@relaxationispossible1593 3 жыл бұрын
Good morning from Kasnas! Looking forward to watching this behemoth!
@Infrared73 3 жыл бұрын
Wonderful job. I'm a bit torn. I love the end result, but I wanted you to incorporate the 83 into it somehow.
@HandToolRescue 3 жыл бұрын
I never removed it!
@DyslexicMitochondria 3 жыл бұрын
he never removed it
@danielretardo7075 3 жыл бұрын
@@DyslexicMitochondria I was curious about your username so clicked on your profile. you have an amazing channel bro
@Infrared73 3 жыл бұрын
@@HandToolRescue True. Even though it wouldn’t match your normal process, for whatever reason a racing stripe and the number 83 popped into my head.
@tristanhali8252 2 жыл бұрын
Love the clear coat over cast!! Bloody brilliant
@ACEHANDLER 3 жыл бұрын
I just wanted to say thank you I bought my first gallon of evapo-rust and it works just like on your KZfaq channel I'm very impressed and I breathed new life into my tools that were Rusty and I watch every one of your videos and I'm subscribed to your Channel thank you once again keep making awesome content about unique tool Restorations
Clough42
Рет қаралды 52 М.
Анастасия Новикова
Рет қаралды 3,2 МЛН