Follow along with me as I diagnose and repair this mower! Turns out it's an electrical problem. #diode #craftsman #briggsandstratton #lawncare #lawnmower #tools #diy #fluke #electricalproblems #electrical
Пікірлер: 89
@DukeWright11 күн бұрын
Chased this issue for two days, this video got me to the problem. Thank you. Well done!
@Wrenchesandrods11 күн бұрын
Thank you! Be sure and subscribe!
@halflife825 ай бұрын
Great video! That’s a hard one to trace as most people would see spark and think good!
@Wrenchesandrods5 ай бұрын
Thank you. I appreciate your kind words!
@bctruck8 ай бұрын
Very methodical diagnosis!! Great catch man!
@Wrenchesandrods8 ай бұрын
Thanks Brad! I appreciate that!
@henrysmith80122 ай бұрын
Good catch. I see these engines with cracked intake manifolds also causing dead cylinder.
@Wrenchesandrods2 ай бұрын
Thank you! I have not seen one with a bad intake cause a miss yet! Thanks for sharing! I'll put that in the ol brain for later diagnosis'
@philliphall5198Ай бұрын
The plastic ones can crack
@jeffglann9894Ай бұрын
Great trouble shooting! Thanks for sharing the knowledge and experience. God Bless you and your business!
@bugayd3695Ай бұрын
What you are measuring is Forward and Reverse resistance in Ohms, not voltage, The voltage from the meter provides bias to either forward or reverse the diode junction (depending on the polarity of the meter probes) providing the two resistance readings. That's probably more info than anyone wants to know, but I'm too anal to have let it go. Good diagnostic video otherwise!
@davidschliebe2463 күн бұрын
Great job!!! I think I'm chasing one of these issues.
@Wrenchesandrods3 күн бұрын
Thank you!
@naldorg95819 күн бұрын
First thing to check if the plug is wet is to check for sparks
@MB123X69Ай бұрын
Thanks for the vid, this might be whats wrong with mine. Better this than a push rod. I would have never would have thought of this with a spark on both sides. Thanks for taking the time to post!!
@jasonsippola18322 күн бұрын
Thanks for video. Time to troubleshoot.
@johndrzal6193Ай бұрын
This was exactly the problem I had. Many, many thanks for posting this repair.
@WrenchesandrodsАй бұрын
Your welcome
@philliphall51982 ай бұрын
When I see a new coil on that cylinder I AllWAYS pull the kill wire to check dio on b/s twin
@KevinCovert4 ай бұрын
Thank you for this content!
@Wrenchesandrods4 ай бұрын
You're welcome
@kozarichukАй бұрын
Didn’t have the same problem, but this really helped me. Thank you so much.
@WrenchesandrodsАй бұрын
Thanks for the positive comment!
@leedeborde56906 ай бұрын
That was awesome I've seen that before but forgotten about it thanks for the info 😅
@GaryBehlmann5 күн бұрын
Thank You!
@Twohandsranch582 ай бұрын
I have a 22hp BS running on one cylinder so i will go through that process and see if it works. Thanks for this video.
@Wrenchesandrods2 ай бұрын
You're welcome!
@JQUICK212 ай бұрын
Was that the problem?
@Wrenchesandrods2 ай бұрын
Yes. The new diodes fixed it right up!
@JQUICK212 ай бұрын
@@Wrenchesandrods those wires with diodes can be bought at auto parts stores?
@Wrenchesandrods2 ай бұрын
@@JQUICK21 not that I know of, but you can order them on Amazon
@user-jj2fl4vs3r8 ай бұрын
Thanks, good trouble shoot
@TGMForum17 күн бұрын
Nice job. 👍👍
@bobbybrown89262 ай бұрын
nice video and test. keep it up.
@Wrenchesandrods2 ай бұрын
Thank you! I really appreciate comments like this!
@wilki6119 күн бұрын
Awesome👍
@bobmeiners448Ай бұрын
Perfect
@philliphall51983 күн бұрын
It’s just a one way valve is all Simple as that 😮
@jasonfollick-xx2ew8 ай бұрын
Damn that black tool box looks familiar!!! 🤣🤣🤣🤣🤣🤣
@Wrenchesandrods8 ай бұрын
Hell yeah it does! I'd rather him be using it still though!
@timmythepilot5 ай бұрын
MY daddy would have whipped my butt if I didn't clean that engine off when I was done fix'n it...All that dirt on them cylinder heads can cause overheating and bad things can happen to that sweet old engine....Great diagnosis though,,!!!!👍
@Wrenchesandrods5 ай бұрын
Everything gets a bath before it goes back home to the customer.
@timmythepilot5 ай бұрын
I can see your dedication and common sense. World needs more mechanics like you, have any experience working on Boeing 777's. LoL
@Wrenchesandrods5 ай бұрын
@@timmythepilot negative 🤣🤣🤣🤣
@Mike-su8siАй бұрын
Mine tells me to get rid of some of my mowers i have but then always get more for free and buy a few more
@kennethmaas64733 ай бұрын
Good vedios
@markchidester6239Ай бұрын
With the wire hooked up to the coils and the plug unplugged, should there be continuity from the terminal on the coil to ground? Great video! I learned my new thing for the day. Lets go for another.
@WrenchesandrodsАй бұрын
With a bad diode, yes. With a good diode no
@brucer12203 ай бұрын
Like the video and process... haven't seen this issue yet... wondering would it be a good way to test kill wires and diodes to unplug both wires, crank it up? To shut it back off after simply crimp the fuel line to shut down?
@Wrenchesandrods3 ай бұрын
I don't think so. When the diode goes bad, it allows current in both directions, which makes it spark out of time. It's still sparking, but it's just at the wrong time.
@Mike-su8siАй бұрын
Mines the same engine except for the air filter cover is different mine doesn't screw on it has the yellow piece you undo mine is 40h777
@scotlippencott1739Ай бұрын
I don't have a spare mower lying around, any idea where I might get that wire with the diodes?
@WrenchesandrodsАй бұрын
Amazon
@philliphall51983 күн бұрын
Most repair shops keep them in stock 😊😊😊
@philliphall51983 ай бұрын
How about the size of the diode ??? Don’t want to buy the wire harness 😊 Thanks for sharing and any part information possible
@Wrenchesandrods3 ай бұрын
amzn.to/3Pe853v Here is an Amazon link to the whole wire.
@markchidester6239Ай бұрын
$12 for two of them makes it worth ordering just to have it on hand.
@philliphall5198Ай бұрын
@@markchidester6239I agree and did that and in a week used one Thanks
@2004DodgeRamАй бұрын
For me both cylinders are firing but the “driver side” one isn’t firing as much as the other side and i can’t figure out why for the life of me, i’ve tried everything i can think off and it doesn’t seem to want to work properly, both fire but one is not firing as much
@WrenchesandrodsАй бұрын
Pull your kill wire off the weak coil and see if the spark improves. If it does, you kill wire is grounding to the block somewhere.
@Mike-su8siАй бұрын
It could be a to tight valve
@JQUICK212 ай бұрын
These diode wires can be bought at Auto Zone or Harbor Freight maybe? Or where?
@Wrenchesandrods2 ай бұрын
No but there are available on amazon
@JQUICK212 ай бұрын
@@Wrenchesandrods Thank you...but those that popped up on Amazon with a search don't look like these originals at all......
@Wrenchesandrods2 ай бұрын
@JEFFQUICKLE9 the key is that they work. They might look different. That's okay. If you shoot me an email with your model type and code, I will look the parts up for you and get you a part number. Justinseabaugh3464@gmail.com
@JQUICK212 ай бұрын
@@Wrenchesandrods I just emailed you Justin....
@davekurtz321Ай бұрын
AMAZON & E BAY
@user-ik4fd9ny4b18 күн бұрын
I have a question? If a 24HP Intel only has one coil (and it's bad) how can one cylinder have spark and the other doesn't?
@Wrenchesandrods18 күн бұрын
I've never seen a 24hp intek with only one cylinder to my knowledge
@user-ik4fd9ny4b18 күн бұрын
@@Wrenchesandrods oh my goodness, thank you for responding so fast. No, you are correct. It has two cylinders. Does it have two coils or one? I’m having the same issue as the title of your video Another video showed one coil, two cylinders with one misfiring cylinder I can see two coils in your video at the 15 minute mark overhead view of your engine. Mine must have two coils so I could swap them from one side to another to see if it makes a difference. Once I do this I'll investigate the diodes. Already took carb apart and cleaned it. Thank you. Thumbs up!
@Wrenchesandrods18 күн бұрын
@user-ik4fd9ny4b pull the kill wires off of your coils and see if the spark returns. If it does, you might have a bare spot on one of your kill wires that is grounding to the block, or one of the diodes is bad.
@user-ik4fd9ny4b17 күн бұрын
@@Wrenchesandrods I did have a bare spot.. MiCE! Also, the coil was nearly touching the wheel, maybe 3 or 4 thousands. Could/would that interfere or stop sparking?
@Wrenchesandrods17 күн бұрын
@@user-ik4fd9ny4b use a business card to gape the coil to the magnetic and you should be set!
@vanguy97802 ай бұрын
Where did you get that fancy compression tester?
@Wrenchesandrods2 ай бұрын
My mom made it! It took about 9 months!
@philliphall51983 күн бұрын
@@Wrenchesandrodslolol 😮
@denniswetzler20243 ай бұрын
Could I just run the engine without the coil safety ground wire? Theoretically of course
@Wrenchesandrods3 ай бұрын
Yes, but you won't be able to shut it off
@Mike-su8siАй бұрын
Sure just starve it of gas and it'll shut off or choke the air breather or leave your kill wire plugged to the coil and unplug it from the harness let it dangle touch it to any metal to shut the mower off
@philliphall51983 күн бұрын
I know one man who ran a wire just to kill it until I told him what was wrong and I had the part 😊