Broadcast Audio TIPS & Tricks - (Free Scene File for M32)

Рет қаралды 11,081

Ryland Russell

Күн бұрын

Пікірлер: 48

@ZSugarDaddy Жыл бұрын

Thanks for sharing, always good to see what others are doing!

@medallionfashion7957 Жыл бұрын

Going to try these tricks & tips out against Sunday. Thanks to sharing! ❤️

@slidermap Жыл бұрын

Great sound that I will be attempting to emulate. Thank you for sharing.

@Glorybound1313 Жыл бұрын

Awesome job and a big thanks for the file. I just moved to stereo for my guitar (using a Helix and splitter box to switch between electric or acoustic). Made a big difference in the room. Still working thru ambient mics as we've got a pretty quiet congregation and I don't want to just have an echoey band.

@medallionfashion7957 Жыл бұрын

Love all the way from Birmingham, United Kingdom

@davidgekler Жыл бұрын

Very nicely done brother, Nice light effects and I always think Audience mics are extremely important for the Broadcast ! Right on Ryland!

@RylandRussell Жыл бұрын

Thanks David!

@eaglebandol Жыл бұрын

Thanks man. It is very helpful. God bless❤

@hiptoalieu Жыл бұрын

THANK YOU!

@andrewlepard Жыл бұрын

Bro it sounds so good! I love it when people take relatively low end consoles and push them to their limits to get awesome results. The X32/M32 are still some of my favorite consoles to mix on!

@RylandRussell Жыл бұрын

Thanks Andrew, I really appreciate it!

@arturts987 Жыл бұрын

I like the "epic" sound of your drums! Please show how you set up everything, micriphones and overall mix ...

@djbassick Жыл бұрын

I like this approach. Always had several post fade channels feeding buses to the stream matrix compressing along the way. It can get a bit more complicated that way. I like that you are using the limiter to compress as well with the squeeze parameter. I would use it as a brick wall limiter only but am going to try your approach. The simpler the better. The MxU guys did a video on something similar but they were just using a copy of FOH merged with another bus (+10dB) for speaking and playback. Wondering which approach would make the most sense.

@luquann Жыл бұрын

Thanks for this insight! I wanted to understand the routing section behind this setup... more specifically how would you configure the outputs for matrices

@RylandRussell Жыл бұрын

Here ya go kzfaq.info/get/bejne/a5qFm9eGqs3bZ2Q.html

@luquann Жыл бұрын

@@RylandRussell Thank you

@johnmcvicker6728 Жыл бұрын

Did not see in the video but you have to send the stereo fx returns to the bus 11,12 to show people how to get your returns into the stereo buses. Return of drum verb into your 9,10 and other fx into 11,12. People keep looking to use a DAW to add to their x32 broadcast quality but they could just do these changes. I mix into buses 1-12 though which is like your four, and separate guitars, keys, crowd, vox and drums. Allows more granularity. Also more boost as you can use bus compressors for pastor mic boost instead of riding faders to +10.

@RylandRussell Жыл бұрын

👍

@callumadams4133 Жыл бұрын

Thanks for the file - one question how do you send your stream mix from the m32 to the stream? And that mix sounds awesome! I love it!

@RylandRussell Жыл бұрын

Xlr sends to atem studio. Just have to choose the matrix on the bus routing page. Thanks!

@callumadams4133 Жыл бұрын

@@RylandRussell Alright - yes that nice an simple, we do the same idea, but have issues with buzz and volume issues with our XLR to Atem mini extreme. XLR to headphone. Will be trying your settings and with effects and looking at the file to see if it helps!

@benjamin.kelley Жыл бұрын

How would I add reverb to the mix if it's all on a mix bus - would I send instruments to the reverb effect, then send that bus to the stream L/R linked mix bus instead of sending everything straight to the mix bus from the fader flip (sends on faders)? Or can you send a bus to a bus?

@RylandRussell Жыл бұрын

Once you have fader flipped you stream bus go to the fx bus and bring it up to taste. You can set the different instruments/vocals fx levels in the same way by selecting the fx bus and fader flipping. I believe this can only be done with effects 1-4 on these consoles.

@fenderjose401 Жыл бұрын

Nice work...sounds pretty big! We have drums in a bus mainly to feed our P16's but not included in the matrix. Curious how including the drum bus into the matrix alongside the other stream bus which also has drums included is benefiting you? Could be something for me to try out. Also, I'm sure you plan on reigning that extra snare ring to the list ...you think it's a gate thing, or just need some moon gel/drum ring type treatment?

@RylandRussell Жыл бұрын

The drums are ONLY in the drum bus and not in the post fader bus. Then they merge in the matrix.

@RylandRussell Жыл бұрын

The drums are ONLY in the drum bus and not in the post fader bus. Then they merge in the matrix.

@fenderjose401 Жыл бұрын

@@RylandRussell Cool thanks for the clarification

@MarkECoburn Жыл бұрын

@@RylandRussell Is that (Drums on stearate matrix) so the drums don't get limited? How do you control the level of the drums... if the FOH guy is mixing everything a little louder or quieter, the post-fader action of the non-drums matrix will bring that all up and down, but the drums won''t. ...or are the drums, effectively post fader because you are grabbing the drums from a stereo mixed-down bus that is, itself, post fader from the individual mic channels?

@ralphciarletti8943 Жыл бұрын

Can you do video on copyright for church worship songs

@evidenceeriamiatoe3815 Жыл бұрын

Did you eq the matrix? Do I route the matrix to a physical output on the x32 to connect to the Atem?

@RylandRussell Жыл бұрын

We don't eq the matrix. Yes, go into routing and route matrix to a physical bus output.

@MarkECoburn Жыл бұрын

Are the drum bus and the reverb/delay the same that is being returned to the main house mix?

@RylandRussell Жыл бұрын

Yes all of our effects are used in both main house and stream mix. Mixed initially at different levels.

@dougkruzan1120 Жыл бұрын

Hey Ryland! Why do you run a Matrix from you livestream bus instead of a direct out? Maybe a stupid question. I'm trying to figure out how to get my livestream audio to the livestream computer after hooking up 2 new s16 digital snake boxes. Would this be the answer? I could run from the matrix out to the livestream?

@RylandRussell Жыл бұрын

The matrix is assigned to two direct outputs. There is no "dedicated" matrix outputs. If using an x32 you would still assign the same way. The reason for matrix is that it allows the summing of the two busses. And opens up effects to be inserted on multiple buses that way.

@evidenceeriamiatoe3815 Жыл бұрын

How do send effects to the stream? Do I send it to the stream bus or the matrix bus?

@RylandRussell Жыл бұрын

We add the effects on to the stream bus.

@djbassick Жыл бұрын

I have been looking at your template in x32 edit. Thank you by the way. Drums and drum verb are both pre fader which make sense. Vocals are post fader but their verb is pre fader. Why is that? The vocal delay is post fade. Just trying to understand the thought process. Thanks!

@RylandRussell Жыл бұрын

Because that was a mistake I fixed recently 😅

@djbassick Жыл бұрын

@@RylandRussell oh ok, fair enough lol, thanks for replying

@KLRCAT Жыл бұрын

I just noticed that there is a slight gap at the bottom of the lower section that is allowing video through (look at the very bottom on the video when there are lyrics on the screen)

@RylandRussell Жыл бұрын

Yep! I saw that too. We just moved our whole pro7 setup to a new machine and had to rebuild our Audience looks. That correction is on the list 😀👍🏻

@GradualShots Жыл бұрын

What’s the reasoning behind having the drum bus pre fader rather than post?

@RylandRussell Жыл бұрын

So we have 4 sound guys and they all kinda run drums to taste in our room so it was a bit of a dance each week adjusting for that in the stream bus. One week the kick would be too loud, snare too soft etc. just gives us a more consistent drum mix so far.

@johnmcvicker6728 Жыл бұрын

@@RylandRussell do you guys do gain settings each week? Could someone roll up gain on kick and the pre fader tap ends up making it too hot that week? If gain is similar and mics don’t move and drummer is same player, should be good with pre fader. Most videos of yours I see the same gentleman on drums, so seems consistent. I have a rotating group at our HoW and may have one of five or more drummers. Some hit heavy, some not so.

@GradualShots Жыл бұрын

Thanks for the reply. That’s a good reason to do it