Now try that with a bolt that was really stuck. Like one from a twenty year old F250 exhaust manifold.
@toolsforwork3 ай бұрын
OK
@61RdlyKryk7928 күн бұрын
A 390 high boy
@ReeceDaBeastt9 күн бұрын
@@toolsforworkdoes he have point?
@boomer93413 күн бұрын
Currently trying to get one off my egr pipe on the manifold. Real pain.
@DexterXxX Жыл бұрын
Now try to remove real snapped bolt that snapped when you undoing
@toolsforwork Жыл бұрын
Broken when trying to remove at first
@DexterXxX Жыл бұрын
@@toolsforwork from what we can see on video it broke when you turning right, which means you overtightened the bolt and it snapped
@toolsforwork Жыл бұрын
Yes, this is mainly to demonstrate the broken wire removal tool
@feyrrari Жыл бұрын
yea and broke the removal bit in the hole. 🤦🏾🤷🏾🥴 show us that with this wonderful sound. 🥴🤣😅🤣
@ebonysteel91582 ай бұрын
Where did you buy that extraction tool at?
@ozzyprod93324 ай бұрын
I fucking hate KZfaq for showing me all this successful attempts meanwhile I failed like an idiot….
@toolsforwork4 ай бұрын
Sometimes it’s not your fault and you need to follow the steps more carefully.
@JohnOcampo-pg4tr27 күн бұрын
@@toolsforworkyour statement contradicted itself So it is their fault because they didn't follow the instructions carefully
@psylentsage11 ай бұрын
I have never been lucky enough for it to go this smooth
@toolsforwork11 ай бұрын
You just have to try more
@looking_336 ай бұрын
skill issue
@Kilz78 Жыл бұрын
Don’t ever use an impact gun on the extractor!!
@toolsforwork Жыл бұрын
Why?
@antj211 Жыл бұрын
Found that out the hard way
@Kilz78 Жыл бұрын
@@antj211 you and me both. Shit job turned 100% worse. I learned my lesson and have never done it again
@narcissisticidiot1727 Жыл бұрын
Hammer drill?
@coltengottschalk1049 Жыл бұрын
Because if you break one of those off in the bolt you’re next step is pretty much a welder. You won’t drill that back out unless you wanna go through 100 bits and be there for 2 days
@jayd93893 ай бұрын
everyone watch the very begging of the video , he tightens the bolt and breaks it off, the socket spins clockwise when it snaps off , not a a seized bolt ,
@toolsforwork3 ай бұрын
You can have a try
@PitPwny3 ай бұрын
They cut the bolt 3/4 of the way through, then when it bottomed out the torque snapped the remaining section off, inside the hole. You can see the cut off disc marks it on “broken” bolt face. Not the fakest of demonstration videos, by far, but no it’s not a 20 year old bimetal seized fastener either. 5/10 for integrity.
@shhoward716 ай бұрын
Love that soothing 70's soundtrack
@toolsforwork6 ай бұрын
Thanks!
@dannypowers4995 Жыл бұрын
My experience with broken bolts are the small ones. 3/8 and smaller. It's tough to drill a hole in a small bolt and use a Easy-out.
@toolsforwork Жыл бұрын
What you said makes sense.
@SoChillExplores11 ай бұрын
What can be done in thia case?
@madjackgamingandfitness4982 ай бұрын
It is, almost not enough bite to surface area. I’ve hammered in torx bits and been able to it like that, since fasteners that small “shouldn’t be” that tight it works. I quote shouldn’t be, but idiots with impacts never learned a torque spec.
@jeffersonperkins7582 Жыл бұрын
Thank you for not talking for 5 minutes before showing how to do this.
@toolsforwork Жыл бұрын
Operations can be displayed without language.
@DoorTrash7 ай бұрын
Totally agree lol
@sc75685 ай бұрын
Show us a real stuck and broken bolt. This one has been cut first. Than you took the head off when tightening it with your impact.
@toolsforwork5 ай бұрын
This is to better demonstrate the tool
@sc75685 ай бұрын
@@toolsforwork there's nothing to demonstrate in this way.
@Hopelessthugg5 күн бұрын
@@sc7568exactly. Very stupid person trying to trick even more stupid people into buying the most stupid tools. Do it right to begin with.
@SIC-SEMPER-TYRANNIS8 ай бұрын
Yep, just snapped off the removal tool. Blee thru 30 bits drilling it then the engine block flange snapped when i used another one. That git the bolt out anyway. Damn 2011 Ford Fusion Belt Tensioner Bolt.
@toolsforwork8 ай бұрын
Consider using tools and careful operation, or consider welding the broken bolt out.
@christianfiguroa7147 Жыл бұрын
What about a 10mm bolt facing the opposite of you on a 07 highlander the bank 2 solenoid
@toolsforwork Жыл бұрын
That might require a different size extractor.
@chins20097 ай бұрын
Try with a real stuck one that you broke, preferably the exhaust studs, and see if it goes this smoothly.. 😂
@toolsforwork7 ай бұрын
OK
@YourFeelingsDontMatter.6 ай бұрын
these vids are staged and it won’t ever happen lmao
@johncombs43993 ай бұрын
What do you do when the extractor tool breaks and the material of the extractor tool is impossible to drill through?
@toolsforwork3 ай бұрын
Try welding
@wmdjohnson Жыл бұрын
How to remove an already loose bolt 🔩 with broken head 😅😂🎉bravo, bravo 👏
@toolsforwork Жыл бұрын
Thanks! 😃
@Hopelessthugg5 күн бұрын
Right!? Guy is such an idiot. Really gotta sell those tools to feed the kids I guess.
@StrongerThanBigfoot3 ай бұрын
So when you drill the first hole are you drilling the normal way or have the drill on reverse while holding down
@toolsforwork3 ай бұрын
Drill holes as normal
@zakkutv1623 Жыл бұрын
I have the same extractor set. I used my impact and it broke the bit inside the bolt. I ended up having to use a hackzall and cut the bolt off. Which made it 10x more harder
@toolsforwork Жыл бұрын
Please use the tool correctly.
@zakkutv1623 Жыл бұрын
@toolsforwork used my impact on the lowest setting. Did practically the same thing you did. Not sure how I could've done it differently
@chucklamantia3067 Жыл бұрын
he called you a stupid Bastard
@kotonarimasu6597 Жыл бұрын
@@zakkutv1623use a breaker bar next time? Using impacts on anything that isn’t suspension you’re just asking for it
@zakkutv1623 Жыл бұрын
@kotonarimasu6597 can't use a breaker bar in my scenario. No space to fit. But you're not listening to what I said. I did almost exactly everything to a T. Just like the video. And it broke. That's the problem.
@ommah36673 ай бұрын
What kind of drill bite you use for thik steel like bolts? I broke many already
@toolsforwork3 ай бұрын
Alloy drill bit
@kirkkoblect59157 ай бұрын
Only if it was always that easy
@toolsforwork7 ай бұрын
It’s not difficult if you use the right tools
@Eighty86Six-fu5rc3 ай бұрын
Does it work with broken bronze bolt too?
@toolsforwork3 ай бұрын
Yes
@atmoore74Ай бұрын
Wish i could even get a drill straight on it. Mine are never in such a convenient location unfortunately
@toolsforworkАй бұрын
Then we need better tools
@GamesYouLike259 ай бұрын
What drill bits are you using I have titanium ones from dewalt And it does not go into the metal so easily
@toolsforwork9 ай бұрын
Alloy drill bit
@musicased9591 Жыл бұрын
Lol how the fuck do you do it without a power tool?! I literally have 3 inches of clearance so you can't even hammer a bit straight into the bolt.
@toolsforwork Жыл бұрын
Maybe I can also use soldering
@Javiertumadre48206 ай бұрын
What' brand of drill screw are they using?
@toolsforwork6 ай бұрын
local brand
@yngjon7 ай бұрын
They make it look so easy
@toolsforwork7 ай бұрын
It’s easy with the right tools
@glasgowfunctionsify6 ай бұрын
How do these videos make drilling metal bolts look easy? Been drilling mine for 2 hours
@toolsforwork6 ай бұрын
Please use appropriate drill bit
@donwest53878 ай бұрын
looks like your bolt was over-tightened; the threaded portion wasn't rusted in
@toolsforwork8 ай бұрын
Some are like this, and some have not been maintained for a long time.
@richardmansilungan79729 ай бұрын
What name of this tools? And how much
@toolsforwork9 ай бұрын
Broken bolt extractor
@FRLCA-qc3fc6 ай бұрын
Did we just get Rock Rolled by a Slowed version of the song?
@toolsforwork6 ай бұрын
Really?
@youngnawabs35173 ай бұрын
Its like black head removal from the body
@toolsforwork3 ай бұрын
Like it?
@scottdavila872311 ай бұрын
What kind of drill bit is needed to drill through the bolt?
@toolsforwork11 ай бұрын
Drill bits for alloy metals
@scottdavila872311 ай бұрын
Do you have a picture of it?
@Jahames698 ай бұрын
Do you make a model for a 9mm bolt?
@toolsforwork8 ай бұрын
Can be customized if necessary.
@edthelasttribe9580 Жыл бұрын
😅 you saying that the steel plate is more rustier and older than actual bolt inside it? 😂 Everyone can see , it’s good for marketing, but that’s a definite scam, no disrespect to you.
@toolsforwork Жыл бұрын
You can actually see if it's true.
@adivarso8175Ай бұрын
Not a centre punch in sight and using an Impact to extract.. it's more of "How not to"
@toolsforworkАй бұрын
??
@steviezxr8 ай бұрын
If I tried this it would take 6 hours
@toolsforwork8 ай бұрын
It won't take that long
@abdallahbendriss259910 ай бұрын
Thank you
@toolsforwork10 ай бұрын
😊
@lilsadboy698 ай бұрын
Looks like you cut the bolt 😂😂
@toolsforwork8 ай бұрын
Well, this is for a better presentation tool
@oakfront9 күн бұрын
In dreams it always happens like that, but in reality and if you work with cars you know that's 1 in a hundred lol.
@toolsforwork9 күн бұрын
Maybe not
@Hopelessthugg5 күн бұрын
@@toolsforwork100 out of 100 times when it's a faked video for clicks.
@CHUKWUMAOBIMIFEANYICHUKWUАй бұрын
Please I need the tools.
@toolsforworkАй бұрын
Need it?
@antj211 Жыл бұрын
Tried that piece and it snapped off in the bolt😩
@toolsforwork Жыл бұрын
You must have bought a substandard product
@falkirk8413 Жыл бұрын
@@toolsforwork yea they bought yours 🤣
@Hopelessthugg5 күн бұрын
Exactly. This is what happens every time you try this on a RUSTED SEIZED BOLT. Which this was not. This was faked. U can get a new screw out of anything once the head is broken off, there is no more torque on the threads. Stuck is different.
@briancodd14057 ай бұрын
Maybe try it on a genuinely rusty bolt, not one that was cut 3/4 ways through before you broke it off 😂
@toolsforwork7 ай бұрын
Okay, still no problem.
@Hopelessthugg5 күн бұрын
@@toolsforworkproof you don't work on cars. If you did. You'd just teach people how to remove a seized bolt the right way.
@ravit928Ай бұрын
Try removing broken exhaust bolts
@toolsforworkАй бұрын
OK
@paulgirard2718 Жыл бұрын
Sawed off screws are easier to get out with a needle size extractor than would be a genuinely snapped ones of that diameter. FAKE
@toolsforwork Жыл бұрын
How can it be faked? If there is no actual operation, then please tell me how I can make it fake.
@CM-xr9oq Жыл бұрын
It's a demonstration, dude
@pingpong96564 ай бұрын
BS - if it snapped for real - it would never budge with just an easy out.
@toolsforwork4 ай бұрын
Why isn't it true?
@pingpong96564 ай бұрын
@@toolsforwork Experience.
@stevesanouk3475 Жыл бұрын
Who specialize in these type of work. A mechanic? A welder? Your work skills look professional.
@toolsforwork Жыл бұрын
Just a normal tool user.
@alexpearson84232 күн бұрын
Everyone in the comments sounds like some serious soft boys
@toolsforwork2 күн бұрын
😂
@writtenpieceopaper111 ай бұрын
That elevator music.
@toolsforwork11 ай бұрын
? like it?
@writtenpieceopaper111 ай бұрын
@toolsforwork surprisingly, yes! It's a funny contrast to all the routine mayhem going on
@romb4u008 ай бұрын
What is the name of last tool( threaded)?
@toolsforwork8 ай бұрын
reverse thread extractor
@davidmalpica30643 ай бұрын
Dónde puedo comprar esta herramienta
@toolsforwork3 ай бұрын
Please wait for our online store
@speedguy26Ай бұрын
It's never that easy 🙄
@toolsforworkАй бұрын
Maybe
@SoldierBoy306410 ай бұрын
center the drill hole
@toolsforwork10 ай бұрын
OK
@ssgsschiraq8858Ай бұрын
Thia tool is ass dont get it please.. mine broke insdie and i had to keep drilling out
@toolsforworkАй бұрын
Why?
@shreyanshverma7290 Жыл бұрын
Buy link please
@toolsforwork Жыл бұрын
Please wait for our online shop to be online.
@travisl5125Ай бұрын
Extractor just made my hole bigger Did nothing
@toolsforworkАй бұрын
Really?
@travisl5125Ай бұрын
@toolsforwork yeah it just turns and turns. U even hammered it in. Its a small 5x20m bolt if that matters. Mabye the bigger ones work better
@abelmaldonado66435 ай бұрын
That looks like it was cut with a cutoff wheel
@toolsforwork5 ай бұрын
For better presentation tools
@user-vd2wl1tu3d Жыл бұрын
볼트 머리 없음 잠금 방향 홈 드릴 아닌 여는 방향 홈 드릴 이용 볼트 나사쪽 기름 분사후 여는 방향 홈 드릴 이용 조이는 방향 홈 드릴 있어도 여는 방향 홈 드릴 못 보아씀
@toolsforwork Жыл бұрын
I don't understand what you mean
@EltallerdeJeffer10 ай бұрын
Now let's do it with a really rusted bolt that stay there about a few year ago 😂
@toolsforwork10 ай бұрын
? you can come and try
@lukeg67817 ай бұрын
Wait am I seeing this right. He snapped the bolt of with impact gun while tightening it. Fake video. Try removing a real stuck rusted bolt.
@toolsforwork7 ай бұрын
To better test tools
@Lindenbum5 ай бұрын
Pretty dumb tightening the bolt you broke.
@toolsforwork5 ай бұрын
To better demonstrate the tool
@team_Green5626 ай бұрын
He cut the blot
@toolsforwork6 ай бұрын
is to better demonstrate the tool
@Kojasmedia11 ай бұрын
how much this
@toolsforwork11 ай бұрын
not expensive
@Kojasmedia11 ай бұрын
@@toolsforwork please tell me how to buy this
@smokey45198 ай бұрын
What is the song in this video?
@toolsforwork8 ай бұрын
Horned Flute Chill
@michaelfulton7116 Жыл бұрын
Wow what did you use to cut the bolt off below the surface. Amazing
@toolsforwork Жыл бұрын
Angle Grinder.
@lueyR Жыл бұрын
Looks like they cut the bolt 75% with an angle grinder. Installed the bolt, then rattled the head off... definitely not a seized bolt.
@sledfam3659 Жыл бұрын
Way too much work. CP 9361 and 60 seconds is all it takes…….
@toolsforwork Жыл бұрын
Maybe.
@s3ct0rxf0ur9Ай бұрын
why is everyone trying to act like these don’t work. too tight? pull harder. these things work lol
@toolsforworkАй бұрын
You can choose the right tools
@Its_Me_Salman Жыл бұрын
😡😡 Grinding cut blot
@toolsforwork Жыл бұрын
tool demo
@josemares1439 Жыл бұрын
Lol
@toolsforwork Жыл бұрын
?
@thomasberg2709 ай бұрын
The bolt was loose and I’m guessing already cut before you (tightened)?? It to break it free?
@toolsforwork9 ай бұрын
Really?
@robertmartinson23003 ай бұрын
It was cut most of the way!!!!
@toolsforwork3 ай бұрын
Really?
@thomasberg2709 ай бұрын
That’s total bs. You should’ve used an extractor twice that size, and I’m betting it still wouldn’t go that smooth.