The more I watch these videos. The more it becomes apparent that quality and brand name isn't the issue. It's about maintaining your firearm properly and making sure you inspect every millimeter of it. Knowing what can go wrong and what to do to fix "defects" is ultimately your personal responsibility. I sir, appreciate everything you teach us. The information is priceless. Thank you.
@tecolon2 жыл бұрын
In n m
@scott22283 жыл бұрын
I’m so addicted to watching these BCG breakdowns.
@americannationalist11103 жыл бұрын
Thank God I’m not the only one. My wife thinks I’m so boring because I’ve been watching these non stop since I found this Channel. This has taught me so much and now I am a little more educated on what to look for when I’m breaking down and cleaning my AR’s. THANKS SOTAR!!!
@ryand5041 Жыл бұрын
Ditto 😂
@DACFalloutRanger4 жыл бұрын
Brownells puts out consistently solid products.
@Hyper_drive2142 жыл бұрын
Im not a fan of long videos but your videos are so informative and there is no bullshit talk all the way through ill watch these all the way through no problem.
@dougrichter45588 ай бұрын
Love your vids. As someone that's been an aerospace and medical machinist for years, I can appreciate your knowledge, thoroughness, and skillset.
@americannationalist11103 жыл бұрын
“That one might be gone forever” He said after the Colt Extractor Spring went flying 😂
@oldschoolprepper22738 ай бұрын
I have found useful information on building an inspection with other videos, but never at this concentration. Thank you very much.
@davidpierce90654 жыл бұрын
Outstanding as always. Thank you.
@jasonlee22084 жыл бұрын
I just ordered a .308 from them. Thanks for this!
@jamesregan21814 жыл бұрын
To err is human. I just try not to be too human. Your honesty and integrity is admirable.
@rcairnut4 жыл бұрын
great video again! now I am even happier with my Hawkeye bore scope.
@johnnyG7802 жыл бұрын
In a different video you mentioned something about not being a fan of scraping when cleaning. I was in the Army, and just a dumb grunt, so I'd used the machine gun scraper tools on my issued M16 and M4 plenty of times. It would be nice to see a video on how to properly clean using the basic cleaning kit.
@christophersine8410 ай бұрын
No kidding. The army was stupid about weapons cleaning. That whole white glove inspection of duty rifles ruined a lot of guns. Bolt tails shouldn't be silver
@bobbym48116 ай бұрын
Awesome videos man it’s amazing what I’ve learned watching these! Thank you!
@richardlee44384 жыл бұрын
Thank I just bought a Brownells BCG and was wondering about the staking and bolt.
@seanmtak75734 жыл бұрын
Great video. I’ve never heard that the extractor should feel like puppy teeth. I’ll have to check that out. After doing some research for replacement parts I ended up getting a whole new bcg. Not sure why I ended up getting one made out of Formula one 🏎 transmission steel but I did..( jp )
@jester43484 жыл бұрын
Master class, every video. Keep it up!
@ssamuelt792 жыл бұрын
Purely addicted to these Physical / Autopsy videos, also shocking to see the results on some!
@DJ-jq8if4 жыл бұрын
Borescope is the only way to go to install as gasblock. Highly encourage anyone to buy one. I bought the teslong, and while the adjustment sucks; it's the way to go.
@michaelbirdsong1964 жыл бұрын
Hey Chad can you do one on adjustable gas blocks and how to adjust them. Enjoy the videos!
@SchooloftheAmericanRifle4 жыл бұрын
I have a plan for that. Soon.
@michaelbirdsong1964 жыл бұрын
@@SchooloftheAmericanRifle yes! Thanks for the response ! Can't wait
@FatGreenSheep3 жыл бұрын
As a machinist, I cringed a little bit when he zeroed the micrometer.
@fatboyEDC4 жыл бұрын
Hawk eye is great. I use them for locksmithing.
@android612424 жыл бұрын
Perfect way to start the day.
@THPOOKY4 жыл бұрын
You're right about that!
@CoryHobbs21784 жыл бұрын
Yes! Another video!
@FNG_Star4 жыл бұрын
@School of the American Rifle Do you have a lower that you would recommend? Which one, in your experience, seems to produce lowers closest to milspec, so that components are less likely to have compatibility issues? Or is that a unicorn that doesn't exist?
@robotbuster14874 жыл бұрын
About Commercial Gas Blocks: Chad, have you encountered any gas blocks that do not take into account the .035" handguard cap thickness?
@SchooloftheAmericanRifle4 жыл бұрын
Some do and some don't account for the handguard cap. Unfortunately I have not tracked that info so I couldn't advise.
@MatthewCuda3 жыл бұрын
The Hawkeye looks more like a medical endoscope.
@ozzmann321710 ай бұрын
Brother you make the most informative videos I got the 3 bore setup off a website that had posted it but really needing your red silver and green gauge sizes you you for checking the bcg can you provide where you have posted this or the sizes please sir trying to get some tools and gauges before taking your class.. and your boat rail go no gauge would be amazing to know what you use or where to buy them
@Cooldibs3 жыл бұрын
How did you find these gauges? I’d love to purchase some for my own! Especially the bcg gauges
@rudolphferdinand36344 жыл бұрын
Watching all the inspections on high-end to the lower end BCG's, only 100% way of knowing that you have an in spec BCG is by if not all of the tools but enough of them in determining close to 100% BCG or cough up the cash and send it to you to do an overhaul.
@rudolphferdinand36344 жыл бұрын
Jon Meray, please explain your pointless opinion, so that we will both know, share it.
@CarlPapa88 Жыл бұрын
@@rudolphferdinand3634His point was that you need all the gauges or you send your gear to get inspected to be 100% sure it's up to spec.
@BB_Chaptsick4 жыл бұрын
Follow up question rearming your Hawkeye borescope. Per Gradient Lens, they offer two video systems- their “high end” Sony ($3,000+) and their less expensive system, which I don’t recall what it was called. Which of the two video systems do you use or recommend? Also, have you done a video on gas block alignment?
@SchooloftheAmericanRifle4 жыл бұрын
The camera adapter I have was a gift from a locksmith friend. It's actually made for a telescope. It's likely Chinese, but I couldn't say where it's from for certain, or who makes it. I do plan on buying a Hawkeye Camera Adaptor, bit just don't have the funds for it currently.
@escapedfromnewyork3 жыл бұрын
I bought a BCM extractor spring upgrade kit (several actually). Do I need to use the donut,as well, and if not, why??? Thanks for taking the time to answer.
@ryanpeck33772 жыл бұрын
Use either the insert OR the donut but not both. If you use both it can create too much extractor tension and cause ejection issues. Either one is all you need
@droppinbrass52403 жыл бұрын
Would love to see an autopsy on a 308 bcg from time to time
@rickgabriel024 жыл бұрын
Did you ever find the Colt spring?
@SchooloftheAmericanRifle4 жыл бұрын
I did. Right after we stopped video.
@vegangainsfather2877 Жыл бұрын
@13:24 I had a CMC enhanced bcg that was causing my buffer to make contact with the buffer retaining pin. The BCG was too short.
@Drago26009 ай бұрын
13:16 “Nice” 😎
@MatthewCuda3 жыл бұрын
I must have had some evil puppies. All mine had sharp pin like teeth.
@Hamchuck1123 жыл бұрын
Why is the ejector test always done off camera?
@SchooloftheAmericanRifle3 жыл бұрын
Some things are reserved for students.
@TheNewNoise74 жыл бұрын
“That one might be gone forever.” That has happened wayyyyy to many times with me!
@nothingtoitdm61913 жыл бұрын
So is there a simple way you have found to determine if a barrel and chamber is chrome lined or not?
@jordanrick29313 жыл бұрын
It will be chrome
@stevehuston98314 жыл бұрын
👍
@thuan123red3 жыл бұрын
I've bought one chromo bolt from Brownell, and I have to say I am not empress. There where bures, scratch on the bolt. If I was going to put it in my upper it will cut into my up. It was just bad. I am buying from BCM, badger ordance or LMT.
@ryanpeck33772 жыл бұрын
I recently bought a nitrided BCG from them and the bolt is exactly the same as the one from my Radian enhanced BCG (carrier is an enhanced design, bolt is regular) Machining is excellent on mine
@edwenger78974 жыл бұрын
Do you have a link for the Amazon bore scope?
@maxie000014 жыл бұрын
can't say much, but I think this company: Teslong
@kenglenn66884 жыл бұрын
Spring cling to sole of the shoe
@squatchfromearth40763 жыл бұрын
You might have received this question before, but why do you only use the field gauge and not a no-go?
@bobbyc27683 жыл бұрын
For some gauges he does, but for the ones he only uses a field gauge it's because the field is the ultimate outer spec and if that goes in it's a problem, and if not and the go goes in it's not a problem, so there doesn't need to be a third gauge as it isn't necessary
@gunnar179 Жыл бұрын
Any chance you’d consider doing one of brownells lightweight BCGs?
@dennischi61077 ай бұрын
I have one and it failed around 4-5k rounds. The gas key screws stretched and gas leaked making it a single shot. I ran into a shooter at a 2 gun match running the same bolt. He said he had 3 fail. He just sends them back and they send him a new one. I could not send it back since I bought mine thru a gunshop.
@0Flingyding04 жыл бұрын
Have you ever taken a look at the BRN-180s? What do you think of them in comparison to traditional DI ARs?
@SchooloftheAmericanRifle4 жыл бұрын
I only work on D.I. AR's now, so I really can't say.
@fhf-16413 жыл бұрын
Have you ever inspected a lightweight brownells BCG? I have two. Both are different design wise and one does not run in my gun. Also has cracks on the carrier key. Thanks!
@chrishesotian16542 жыл бұрын
the back hole eats another spring...
@TheMsdos252 жыл бұрын
Does anyone know who the actual OEM of these bolt carriers is?
@ryanpeck33772 жыл бұрын
Not sure but I recently bought their nitrided one and i found the Bolt is exactly the same as the Radian Bolt (radian uses an enhanced bolt carrier design) but whoever makes the bolt also makes them for Radian so they are definitely good quality. I cant say if this is the same exact bolt in the video but the nitrided one is
@davidgeorge3859 Жыл бұрын
Probably microbest if I had to guess
@freemenownrifles88144 жыл бұрын
These are all I run and I've had no problems.... have a 308 also
@MrPincheRey4 жыл бұрын
Just got to work, guess I’ll be late this morning.
@THPOOKY4 жыл бұрын
Damn shame lol.
@5jjt2 жыл бұрын
I believe Microbest makes Brownells bcgs.
@Mikey_Chopps4 жыл бұрын
Is your Sionics BCG break down available on your KZfaq? Haven’t been able to find it.
@theneighborguy4 жыл бұрын
I'd like to see more Sionics physicals. Barrels and bcg's. I have 2 Sionics mc barrels and they've been some of the best I've owned honestly.
@CoffeeAndSteel4 жыл бұрын
The Sionics BCG is pretty much the same as the Forward Controls Design BCG. FCD takes their BCG and adds the dimples/serrations, and a few other things. My recent Sionics BCG came with the OCKS screws on the gas key as well, so that is an update to my knowledge.
@Bad666Moon4 жыл бұрын
Are the misaligned carrier keys from a particular manufacturer or company or are they from several different ones?
@SchooloftheAmericanRifle4 жыл бұрын
From just about all manufacturers. That why I check for it.
@charlessquire3 жыл бұрын
@@SchooloftheAmericanRifle mm
@FierceMouse Жыл бұрын
My BCG and firing pin are all magnetized because my dumb @$$ used a magnetic tray when cleaning them. Did I ruin it? Can it be fixed? (shame)