MERCI MON CHUM'' POUR CET MERVEILLEUSE VIDEO,VOUS ÉTE A QUEL ENDROIT EN ONTARIO! MOI J'ÉTAIT CLLECTIONNEUR DE JOHN DEER PRES D'EDMUNSTON N.B! MERCI TRÈS BON VEDEO !!!

Thanks Bill! I was hoping for a tractor show video.

Thanks for taking us to the show!

Thanks for including a few Alice Chalmers Tractors. That is what I had...well bought a basket of parts and put it back together. 1957 Alice Chalmers. I used it for brush hogging most of the time, but I had a box blade to smooth out our driveway a few times too. It said it was a D-12, but I couldn't find any other info on it, until we sold the land I used it on and and we took the tractor to an auction to sell. The guy who bought it was as Alice Chalmers collector and told me it was a really rare tractor...and let's say we made a lot more on the tractor than it was bought for 15 years earlier in baskets.

you filmed a john deere 4020!!!!!!! MY FAVORITE TRACTOR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

That was a great video of a great show Bill!

Nice vid. Thanks for sharing it with us.

My wife and I just watched the video. Excellent work, enjoyed it immensely. When you mentioned Farming Simulator she cracked a laugh and said "That's why you subscribed to his channel." Thanks again and keep up the great work.

Bill, you need to come down to Brownsville Pennsylvania to the National Pike steam gas and horse association show. Its is awesome. They have over 30 shovels scooping dirt.

it is really good to see that the old tractors as old as they are still pulling their weight!

Thanks for the show!

As a Farmall fanboy, I really wanted to walk those red rows T^T. But I love Deere, too, so it wasn't so bad. We have a couple of old Fords that gave given us a lot of trouble: an 8N and a 9N with a beefy front loader. Neither one runs well, if at all, and both of them need more attention than we can afford right now (both time and money). I would really love to restore the 8N, though, and drive it in our annual 4th of July parade.

The Lanz Tractors I have seen have been German. The Lanz Bulldog was a single cylinder. single the piston on the Lanz Bulldog was HUGE. Talk about popping when it ran.

i love john deere's

Another great video from that show.

Thanks for posting this Bill, looks like it was a great show.

The chain drive dump truck is a Mack AC , very popular in the day , it is the truck that put Mack trucks on the map so to speak .

The tractor pulls are my favorite! I could watch them all day! That steam shovel is real cool too! There's a gravel company near me that has one sitting outside the entrance to their yard. Every time I drive past It I cant help but wonder what it was like to run something like it.

Bill YOUR AMAZING

thx Bill You da best love that Oliver 1950 !!!

Love the show Bill thanks a lot man.

i love the big steam tractors

Totally awesome vid! Thanks Bill!

The steam protion is so cool. Thanks for taking us bill.

The john deer trail buck is actually a bombardier. I have the same bike that I bought brand new in 2002. Mine is called a traxter. The developed the line and then started calling them john deer after a few years. Tough bikes. Mine is 14 years old now and still runs like new.

Love your vids bill!!! Can't wait till your FS15 vids.

I don't know how my grandsons name got on the comment I wrote below. I;m Sharon Goebel, Drove a 60 then a 520 and Dad had a 620 we farmed in Lucas county. I spent many hours in that tractor seet year round.

Thanks for doing these Bill. this is the third time I have watched it since you uploaded it. I have been pulling 36 years this year, with a 1948 John Deere model A 1950 Oliver Super 88 diesel row crop and a 1953 Massey Harris 44 D. The Massey Harris I have been pulling with since I was 16. I paid 75 dollars for it in 1976 when I was 12 years old with my Blueberry raking money. The Oliver Supper 88 I traded a spring heifer for in 1982. The John Deere A I paid 550 dollars for 8 years ago it was seized up from sitting in a barn for 37 years. Took the plugs out put some penetrating oil in the plug holes rocked her back and forth by the rear tire in 3rd gear and she broke free. Cleaned the points in the magneto a new carb kit and it fire up. Let it run awhile for the valves to fully reseat in, been using her ever since.

I live in salem OR and go up to the steam up hear. They also have a sawmill even bigger .

Best Vid ever!

cool tractors

Think about this our roads where build with machines like these. and they were better and lasted longer than today. Our country was built with those out dated machines. Which generation had the best. ?????

Oliver is a Detroit Engine is why it sounds like high revs

Great video man, I appreciate the effort that went into you making this video! I have never been to a tractor show and this looked unbelievably fun and you did a great job explaining stuff. Keep up the good work we appreciate it.

The chopper is actually a blower to throw silage or haylage into a silo

we have a deere 350c dozer at the vocational school I used to go to

nice video bill!

Nice vid Bill. Wow, a shame they allowed the farmall/ihc's to switch their T/A's. Every tractor pull I participated in, if you switched it, automatic disqualify. You started in 1 gear, you stayed there. The old JD 820's, 830's, G's R's and D's were the real power houses.

Hey wish I new you were in my town for the show. Would have like to meet you ..good old Paisley lol

That steam shovel was built just south of where I live

I love the Erie steam shovel, life goal, operate one of those....

NICE VID. :) LOVE THAT KIND. :) bill u sould make a front end loader 4 ur 2720. :) that would be bad ass vid right there. :)

The thing at 7:22 is called a hammer mill

i just bought one of them bailers on farm sims

My grandpa is a retired hey farmer and he has a johndeere 4040. And hiyerd workers

im not the only one who wached the hole thing am i

Which of those old Deere models were based on the famous Lanz Bulldog? The company that built (Lanz) them was bought by Deere in 1939 or so, but they built those awesome old single horizontally moving cylinder hot bulb oil engines that run so slow and sound so nice! It'd be so cool if Deere built a Bulldog based tractor themselves as well...

I have the same ERTL 50 tractor that we are refinishing for our Great grandson. ours was a rusty mess when we bought it. Now it lools brand new. I don't know what to do about the spot in the middle of the steering wheel. I know something should go there but I can't figure what it is. Can anyone help?

pretty rough lookin pullin sled. but nice pull back tractor

Sick

What do the PTO's do?

15 grand for that huge tractor !!!! I bot a small kubota that's 9 years old for more than that

Bill ,The yellow JD's are industrial units not Ag tractors .

listen at that Farmall go like there aint no tomorrow at 1:35:20

Bill how is it 16 hours away

there's guy named one lonely farmer had he has a couple old john Deere tractors like that

I beleave the horses were belgum clydale and shire horses

15:46 That's a "sickle bar mower."

Hey bill you should do a Cold start vid on your hit miss engines and stupid spell check messed up on my first comment

The disk plates were probably broken by hitting rocks!

Hey what about the 655

I had KB5 INTERNATIONAL

i hook up 3 tippers to pull, i fighure a way to hook, back up slowly inch by inch

hey i now the extvocotr form erie

built what was that yellow tractors they're considered ih I'm in an industrial the used alongside the roadways that's why they're painted yellow so I can you stand out there just thought I'd give you a tribute

Hi

How about making a video of the OTHER brands of tractors, not only John Deere, I like them all, mostly old timers running on gasoline, kerosene, butane, methane, alcohol and a few other strange fuels. N. Y., 02/10/17.

Hey

truck at 32:31 is a mack

find a john deere coffen just like your profile picture

whats so special about 1141?

Hi bill how is it going I just wondered if I sent a letter would u email or reply back

Gee = right Haa (or however they actually spell it) = left

5th

shave??????????????????????

dude thats not even the bigest there ever cod/gypsy cod = not hugly big

I love ur videos but I have to be honest John Deere is crap. Cat is the best by far