As soon as that all came apart, I said to myself ... oohh geez Hopefully it'll just be bad solder joint! This device looks like a nightmare to troubleshoot. 😳

Opening a very high-dollar tool like that ALWAYS has an accompanying pucker factor. Well done Sorin. Two things I would have done differently: I would have soldered ALL pins for that connector including the case pins to strengthen the entire connector; I would NOT have pressed on the connector when I reinstalled it is the case. I'm a long-time viewer of your content and you have taught a lot of folks. Keep it coming!

I’d have been too nervous to open it. Nice repair Sorin. You’re a brave man.

these days am not afraid to open new things coz master Sorin always motivate me to do hard things

thanks Sorin, when i worked for a television company in south africa , we called it A DRY JOINT

I've got a mixing desk with a similar fault coming my way soon, they have to pull the lead to one side for it to work the lights properly so hopefully it's a cracked solder joint like this repair! 🤞

Great fix I would of been so nervous doing as the cost was £3.5k well done Sorin 😊

What a cool looking board. I get real nervous when plastic pieces require a little snap to separate or put back together. I've broken a lot of plastic snaps in my time lol. I would have been sweating too!

Nice repair job!

Good luck sir 🎉

Well done Sorin! Better charge for 20 pizzas sir. 😂

I can't believe it! Sorin didn't fight a capacitor in this episode? Oh, Lord! Miracles are around

Nice work.

Good job mate 👏

Wow, that was a nice one.

Sorin I think its time for big chuncky solder iron tip :D

Very good job mr Sorin...is not at all an easy pizza...it's very difficult to work on the "very,very expensive such tool",a very hard job i could say.Thank's for sharing your skills with us.Have a nice day!

good job on the repair, but im not satisfied because you didnt mention anything about the proper calibrated wire on the motherboard

Nice! Stress it's understandable at this price!

Hi Sorin bravo 👌

Well done Master! Big risk here

5:00 *GYYYD!* 😄

Hi Sorin, i don't have this kind of tool came in my Lab hoping soon so me be same fault, bye Francesco Timpano from Florence Italy

I subbed to Sorin and joined the membership, Sorin helped me learn electronics and I am getting good at diagnosis and repairing, thanks Sorin.

WoOoOoOoOoOoOoW very Good repair ❤❤❤❤👌👍👍👍👍👍

Not easy not hard; stress load work.

Hello🤝Good job 👍👍👍👍👏👏👏👋👋👋👋

I FIXED 😁

Scary

Hi I’m in the USA and I don’t see a join membership option

No calibrated wires on the Calibrated device

Nice

only as good as that 20p electret 😅 theyll be analysing some recovered data one day and the commentary will come on "can you believe" 😂 ghost of sorin

Ce stie Sorin al nostru :))) God, scuze.

It has to many capacitors!!! Let's take some out😊

Buy a decent solderiron for this kind of jobs.

Unreal that the mfg refuses to support this product. Is such an expensive measurement instrument considered disposable as a cell phone ?

That's the reason unleaded solder sucks big time. The joins are usually very fragile and susceptable to cracking. Usually 60/40 or 63/37 is much more elastic.

Now Hottinger Brüel og Kjær.

Sometimes you are lucky. Still, most would not have accepted the job due to the risk involved. ;)

very common problem with lead free solder

This is the unprofesional to not resolder all pins, not hard and prevent future problems.

We're use these

LEZ TESTET 🤣

Lucky fault !

Battery is not glued on. They do not follow the fashion of anti repair companies. That is great...

easy pizza

Northbridge fix would charge a minimum of 1500 for this repair, the more expensive the devices are the more he charge smh scamp. He always say what they will pay to replace it... smh Alex the scammer