Brummbär - Tamiya - 1/35 - Tank Model - Part 2 [ Painting - weathering

Brummbär - Tamiya - 1/35 - Tank Model - Part 2 [ Painting - weathering - Finishing ]

Рет қаралды 339,167

2 жыл бұрын

Soldiers in combat on the rear deck. The two participating soldiers from the junk box have their heads replaced with models from Tamiya's tank soldier set.
They bravely fight in a difficult battle situation.
Ah ~~~ Which is their tomorrow …!!!
リアデッキ上で戦闘体制の兵士たち。ジャンクボックスからの参加兵士達2名は、ヘッドをタミヤの戦車兵セットのモデルとすげ替えてあります。
厳しい戦況の中、勇敢に闘う彼ら。
嗚呼・・・ドイツ軍兵士達の明日はどっちだ・・・！！！
MUSIC
------------------------------
Leaf by KV / kvmusicprod
Creative Commons - Attribution 4.0 International - CC BY 4.0
Free Download / Stream: bit.ly/2CCnozj
Music promoted by Audio Library • Leaf - KV (No Copyrigh...
------------------------------
Burning Bridges by tubebackr / tubebackr
Creative Commons - Attribution-NoDerivs 3.0 Unported - CC BY-ND 3.0
Free Download / Stream: bit.ly/3p26hNZ
Music promoted by Audio Library • Burning Bridges - tube...
------------------------------
Horizons by Scott Buckley / scottbuckley
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/horizons-scott-buckley
Music promoted by Audio Library • Horizons - Scott Buckl...
------------------------------

Пікірлер: 293

@kevinadkins3107 2 жыл бұрын

Beautiful work, thank you for sharing!

@smc-2 2 жыл бұрын

You are welcome and thank you for your comment.👍

@seanatron8005 2 жыл бұрын

using the pastel to simulate debris is absolute genius

@smc-2 2 жыл бұрын

I am glad that you liked it. Thank you for your comment.🍎

@donaldcoffman4469 Жыл бұрын

I restore WW2 German vehicles and weapon systems. After a full restoration it's fascinating (and a bit disheartening) to watch the paint fade, scratch, chip, and metal rust due to use for movies and reenactments. You did a wonderful job illustrating the look of a seasoned armoured vehicle.

@smc-2 Жыл бұрын

I am very happy to be praised by a professional. Thanks for your comment.🍺

@stealthlion9990 2 жыл бұрын

I didn't think anyone could make rubber band tracks look that good! Well done!

@smc-2 2 жыл бұрын

Is that so. I'm not a pro so I can't spend a lot of money on one model. I had no choice but to go through a lot of trial and error to make the rubber tracks look realistic. Thank you for your comment.👍

@shannonmonroe5873 Жыл бұрын

Unbelievable detail. Wow...this guy is one of the best modelers on KZfaq.

@smc-2 Жыл бұрын

Thank you. But too much praise.😓👍

@garylawless3608 2 жыл бұрын

A brilliant result! The whole painting and weathering technique was masterful. Thanks for sharing with us!

@smc-2 2 жыл бұрын

You're welcome. Thank you for your comment👍

@beateclausen4312 Жыл бұрын

Lovely work and the use of camo netting make the tank very alive.

@smc-2 Жыл бұрын

It's great that you like it. Thank you for your comment.🍎😄✋

@MESOSHOKENDESU 2 жыл бұрын

しばらく、プラモ製作から離れてましたが、動画を拝見させて頂き、再び始めてみました。主様のようなセンス良い塗装を目指してるつもりですが、上手く出来ない😵 色々参考にさせてもらってます。

@smc-2 2 жыл бұрын

少しでもお役に立てれば幸いです。これからもよろしくお願いします。😄

@mattmoore1100 2 жыл бұрын

Superb modeling! The use of pastels was incredibly displayed in an interesting way! Weathering techniques also killer! Thanks for sharing!!!

@smc-2 2 жыл бұрын

I'm glad you enjoyed it. Thank you for your comment.👍

@ianjackson7515 2 жыл бұрын

Easily the best build series so far. Looking forward to more projects & videos. All the best from New Zealand.

@smc-2 2 жыл бұрын

I'm glad you enjoyed it. Thank you for your comment.🇯🇵👍

@darrylcarpenter903 2 жыл бұрын

Awesome work. It looks so convincing I have a Tamiya Brumbar sitting in a box and your work has inspired me to start it. Thanks!

@smc-2 2 жыл бұрын

I hope I can be of some help, thanks for your comment.👍

@tladrt48 Жыл бұрын

Totally completely stunning in all aspects-WOW

@smc-2 Жыл бұрын

Thank you.👍🍎😄

@scalemodelpursuit 2 жыл бұрын

Inspiring work. Seeing models turn out this good motivates me to keep practicing and trying new techniques. I really like how the figures turned out too. Thanks for the awesome video!

@smc-2 2 жыл бұрын

I am glad that you enjoyed it. Thank you for your comment.👍

@nzdigital 2 жыл бұрын

Stunning work. Incredible result. Amazing.

@smc-2 2 жыл бұрын

Thank you for praising me. It will be encouraging.👍

@maverick1013 2 жыл бұрын

Lovely work,,i especially like the chiping ,camo net and the infantry ,,top class modeling 👌

@smc-2 2 жыл бұрын

I am glad that you liked it. Thank you for your comment.🍰

@josecesar8657 2 жыл бұрын

Wonderful job in all aspects, model, accessories and figure

@smc-2 2 жыл бұрын

It may be a bit too much of a compliment, but thank you.🍎

@miiuorekamiki162 Жыл бұрын

You can feel the horrors of war. Well done👍❤️

@smc-2 Жыл бұрын

Thank you.🍰🍰🍰

@officierpolonais2367 Жыл бұрын

I used to built models (1/72) when I was a teen. Most were planes but there were tanks, guns and several vehicules too. It's over for me now. But congratulations and more for your talent and your patience ! Huge job !!

@smc-2 Жыл бұрын

Thank you for your compliment comment.🍰

@steeliron8246 2 жыл бұрын

Great Work, fantastic weathering and chipping - Really Nice Brumbär !!

@smc-2 2 жыл бұрын

Ein vollwertiges Diorama wie Sie ist schwer für mich herzustellen, also habe ich ein Figurenmodell verwendet, um eine begrenzte kleine Welt auf dem hinteren Deck eines Panzers zu erschaffen. es war lustig.😄

@steeliron8246 2 жыл бұрын

@@smc-2 das mit dem platz geht wohl vielen so :-( trotzdem sieht dein ergebnis sehr toll aus,mir gefällt es sehr sehr gut!!

@smc-2 2 жыл бұрын

@@steeliron8246 Thank you🇯🇵☀👍

@jessewatkins1338 Жыл бұрын

Very cool!!! Great detail.

@smc-2 Жыл бұрын

Thank you.👍😄🍎

@brianfoley4328 Жыл бұрын

Great video...a wonderfully done tutorial of "How to Do It Right". I'm a ship modeler but this has motivated me to try an armor kit.

@smc-2 Жыл бұрын

I used to enjoy making airplane models, but one day I suddenly became absorbed in making tank models. This is because there is a wide and deep tolerance for modeling that allows you to freely modify your own ideas and inspirations. But if you enjoy it as a hobby, it's all fun to build ships, planes, and tanks. Thanks for your comment.🍺

@RobertMcCall1313 Жыл бұрын

Exceptionnel ! Bravo ! Superbe technique ! Plus vrai que vrai !!!!

@smc-2 Жыл бұрын

Merci.🍰

@thedamienharveygroup7014 Жыл бұрын

Very well made and easy to follow videos. Thanks for sharing.

@smc-2 Жыл бұрын

You're welcome, thank you for your comment.👍

@hectorsandoval6817 Жыл бұрын

Un verdadero realismo! Felicitaciones! Adelante 🍀☘️👌

@smc-2 Жыл бұрын

Gracias.✋🍎👍

@SteveJonesScaleModellingSite Жыл бұрын

Just discovered you channel and subscribed. Looking forward to seeing more of your work.

@smc-2 Жыл бұрын

This is a video post for my own enjoyment. However, I think it would be wonderful if the viewers could also enjoy it at the same time. Thank you for your continued support.😄🍎👍

@JG-uv5vt 5 ай бұрын

この動画を参考に、何度も何度も見返して私もブルムベア、最近ようやく完成しました初めてのエアブラシの迷彩塗装やネット作製でしたがなんとか納得できるものが出来ましたありがとうございました🍀 これからもちょくちょく寄らせてください🙇‍♂️

@smc-2 5 ай бұрын

そうでしたか。それは良かった。少しでもお役に立てたなら幸いです。こちらこそ、これからもよろしくです。コメントありがとう。🍜🍣🍢🍥🍺

@gerardopatriciovidalvargas3508 2 жыл бұрын

Eres Genial y muy Realista, como también Detallista, te Felicito por tu trabajo y preocupación, Saludos desde 🇨🇱

@smc-2 2 жыл бұрын

Gracias por tu cumplido.🇯🇵👍

@tonyperez4791 2 жыл бұрын

Just discovered your channel, great builds ! Hope you have a good/safe weekend.

@smc-2 2 жыл бұрын

Thank you for finding it. I'm glad you like it.🇯🇵

@orladeering7256 Жыл бұрын

Simply spectacular, genius,best l've seen, thanks for posting ❤☘

@smc-2 Жыл бұрын

I don't think I'm a genius, but thanks for the compliment.😄🍰👍

@user-sk7pt7or5h 2 жыл бұрын

毎回、毎回うますぎだってww これからも頑張ってください！

@smc-2 2 жыл бұрын

ありがとう、マイペースで頑張よう心掛けまっす。🍎🍰👍

@ptasi0r860 Жыл бұрын

it looks very realistic.. you did it really well! :D

@smc-2 Жыл бұрын

Thank you.🍎

@user-lh8en2sd3b Жыл бұрын

Да это же произведение искусств!!!👍👍👍👏👏👏😊😊😊

@smc-2 Жыл бұрын

Большое спасибо.🍺👍

@billgriffin7346 10 ай бұрын

Very nice, a true work of art.

@smc-2 10 ай бұрын

Thank you.🍔🍔🍔🍺

@Rainers_Modellbau Жыл бұрын

Great Paintjob :)

@smc-2 Жыл бұрын

Thank you.👍😄🍎

@americanpatriot2422 2 жыл бұрын

Outstanding video and presentation.

@smc-2 2 жыл бұрын

Thank you👍

@silvestersze9968 4 ай бұрын

Amazing work! 🎉

@smc-2 4 ай бұрын

Thank you.🍎🍏🍎

@ArmorStudioNYC 2 жыл бұрын

Really amazing work!!

@smc-2 2 жыл бұрын

Thank you🍰🍎👍

@antonybullock2240 Жыл бұрын

That is pretty f’kin ninja. Absolute legend.

@smc-2 Жыл бұрын

I don't understand what you mean, but thanks for your comment.👍

@albertoroldan354 Жыл бұрын

Quedo perfecto. Muy realista. Felicidades !!!!

@smc-2 Жыл бұрын

Gracias.👍

@alainleborgne9804 2 жыл бұрын

Une très belle réussite et un beau résultat de peintures et un vieillissement parfait , chapeau l'artiste 👍👍👍👍👍👍

@smc-2 2 жыл бұрын

Thank you very much🇯🇵👍

@ModeliteDiorama 2 жыл бұрын

Spectacular in any aspect!

@smc-2 2 жыл бұрын

Thank you🇯🇵👍

@yossyyoshioyamamoto Жыл бұрын

素晴らしい！！まるで敗戦末期のドイツ市街戦が目に浮かぶようです！背景無しでもある世界感があって良いです。

@smc-2 Жыл бұрын

ありがとうございます。🍺

@jerryjeromehawkins1712 Жыл бұрын

Love this! Monogram made a very nice Brummbär kit back in the day... Sturmpanzer 43. Complete with two crew members... 1/32nd scale. Btw... Subscribed my friend! 👍🏽🇺🇸

@smc-2 Жыл бұрын

Thank you.✋👍🇯🇵

@philRminiatures 2 жыл бұрын

Outstanding attention to details!😍😍

@smc-2 2 жыл бұрын

Thank you😆🍎👍

@detlevwalter7495 2 жыл бұрын

very well built and painted

@smc-2 2 жыл бұрын

Thank you. 👍

@Caesare9223 Жыл бұрын

Great work!

@smc-2 Жыл бұрын

Thank you.👍

@user-mr2jj3jd7w Жыл бұрын

エンジンルーム上の歩兵が躍動感あってかっこいい！やはりタミヤは作りやすいですよね～

@smc-2 Жыл бұрын

近年の田宮は特にですが、デテールアップと組み立てやすさのバランスが絶妙な塩梅でバランスしてて、とてもいいです。コメントありがとう。👍

@johnmcmullen7358 2 жыл бұрын

beautiful work, was a great learning tool thank you, i hope my Brummbar looks half as good as yours

@smc-2 2 жыл бұрын

I would appreciate it if you could help me with making a plastic model. Thank you for your comments.✋

@kevinwood5005 Жыл бұрын

Hope mine does too. Though, realistically, i haven't got a cat in hell's chance. 😗

@sergiobarbosavieira6676 2 жыл бұрын

Espetacular!! Parabéns! 😀👍

@smc-2 2 жыл бұрын

Obrigada.🇯🇵👍

@richardgasson7283 Жыл бұрын

Awesome mate

@smc-2 Жыл бұрын

Thank you👍

@abigailirvine3414 Жыл бұрын

Outstanding

@smc-2 Жыл бұрын

Thank you.👍

@isaac61200 Жыл бұрын

Stunning!

@smc-2 Жыл бұрын

Thank you.👍

@panzer-meister 2 жыл бұрын

お疲れ様でした。いい仕上がりですね～。積載、むっちゃリアルです。

@smc-2 2 жыл бұрын

一度にフィギアー3体の塗装は結構大変でした。仕上がりはジャンクなフィギアー達もいるので100点満点とは行かないですが、とりあえずギリギリ合格点という事で・・・いつもコメントありがとうございます。🍰

@CJ-qv7oo 2 жыл бұрын

Fantastic looking 👌 👏

@smc-2 2 жыл бұрын

Thank you🍰🍎🇯🇵

@bubbapipe 2 жыл бұрын

That looks awesome 👌

@smc-2 2 жыл бұрын

Thank you🍎

@Bryan-cs9to Жыл бұрын

Nice work!

@smc-2 Жыл бұрын

Thank you.✋

@Mis729Ha Жыл бұрын

Here's a tip for painting armored vehicles models that I used for years, and, used semi-professionally: instead of using paint to simulate wear & tear, use very fine sandpaper to "polish" the model paint to inflict actual wear. This gives a particular sheen that cannot be duplicated by painting to imply distress. It makes it appear like actual steel. Try it on areas that people would walk on, etc. Another: when painting figures, the clothing must be done with absolutely flat paint with zero sheen, otherwise it looks like shiny rubber or something other than wool. Final tip: putting ammo cans, panzerfausts, etc on the engine exhausts would be a real-world, bad idea. Heat & explosives just don't mix....

@smc-2 Жыл бұрын

Thank you for your comment.🍺

@ultravioletsus Жыл бұрын

Although we cannot tell that it wasn't done.

@smc-2 Жыл бұрын

@@ultravioletsus 👍

@alfonsocardenas4118 2 жыл бұрын

Excelent work congratulations good Chanel

@smc-2 2 жыл бұрын

Thank you 👍

@skip-jack632 Жыл бұрын

お.....ブルムベア（Sd.Kfz.166）ですね、子供の頃に作った記憶が甦りました。子供にエアブラシなど買うお金もなくて、全部筆で下手くそな塗装してましたけど...。　😅 さすが動画に載せるだけあって、細部にまで緻密にこだわったハイクオリティーな仕上がりです。　👏👏👏 buravo !

@smc-2 Жыл бұрын

お褒めの、お言葉、ありがとうございます。🍰

@djchrismorgan6011 2 жыл бұрын

I cant be the only one who was watching you do the post-shading on the camo and freaking out as it looked like you'd gone way too light.... great job mate, well done, looks great at the end.

@smc-2 2 жыл бұрын

I was a little surprised to read your comment. I always proceed with painting in such a manner. I thought again that each person has a lot of perspectives. Thank you for your comments.👍

@djchrismorgan6011 2 жыл бұрын

@@smc-2 wasn't a dig mate :) - the video made the highlights look lighter than they were - some of the green post shading looked almost white on the video. It looked scary at the time but then the paint dried and looked really nicely faded and desaturated - really nice job. I wasn't trying to criticize mate!

@smc-2 2 жыл бұрын

@@djchrismorgan6011 Don't worry about anything. Various opinions and impressions may lead to better results in various parts of future production. Thank you for your comment.😆✋

@ideiben3190 Жыл бұрын

Nice job! ...I'm working on the Academy Brumbar 'mid' version kit right now 1/35 sclae. Comes with Zimerit and is a nice kit.

@smc-2 Жыл бұрын

It's an expensive and precise kit. Please take your time and enjoy yourself to the fullest. Thanks for your comment.🍺

@cDcDcDcD470 Жыл бұрын

Magnifique, très réaliste...

@smc-2 Жыл бұрын

Merci beaucoup.👍🍎👍

@user-vk9lo8xq5z 2 жыл бұрын

素晴らしいです。

@smc-2 2 жыл бұрын

ありがとう👍

@normangebhardt 2 жыл бұрын

Great work

@smc-2 2 жыл бұрын

Thank you✋🍎👍

@thedamienharveygroup7014 Жыл бұрын

PS: Beautiful work!

@smc-2 Жыл бұрын

Thank you😄

@user-vk9lo8xq5z Жыл бұрын

クルスクの市街でサイロに立て籠る敵に150mmを今にも発射するようなブルムベア緊張の模型最高です。

@smc-2 Жыл бұрын

いいですね〜。そんな感じでイマジネーションを膨らませ、ストーリーを想像していただけるのならば、私としては大いに満足！！！大成功と言えるでしょう。コメントありがとう。👍👍👍

@HappyDog-f2l Жыл бұрын

すげええええ　かっこいいい手先器用でいいなあああ✨

@smc-2 Жыл бұрын

手先は器用かも知れないけれど、心は不器用な私です。🍎🍎🍎

@jimmylight4866 Жыл бұрын

Amazing

@smc-2 Жыл бұрын

🍎👍😄

@tilomommert8212 Жыл бұрын

It looks very cool 👍👍👍

@smc-2 Жыл бұрын

Thank you🍰😄✋

@barrycabbageM34 Жыл бұрын

I was kinda curious, is there any particular reason to remove all the tid bits in the beginning with the tweezers in the beginning? I cant see an obvious reason is there is, to my knowledge no to soil paint yet.

@smc-2 Жыл бұрын

I'm sorry. I don't quite understand your question. But in videos it's my style. Thanks for your comment.🍰

@left8137 Жыл бұрын

Not really. Mainly just for the video.

@creightonleerose582 Жыл бұрын

Hey SMC2, on Christmas Eve, I'd just received BORDER models StuG III Aus-G- w/interior-crew & extras present.... -I'd placed the pre-order through Andys Hobby HQ-(Think hes got a review vid on the kit?)- like 6-8 months ago, I just wrote it off thinking I'd never get it, then came the Long Beach CA shipping port/boat unloading debacle, but MAN!...It was WELL worth the wait!!! -Its an >IMPRESSIVE KIT< indeed!... -Just looking @ the detail present & parts count on the sprues w/o starting the build process, its a kit I'd HIGHLY recommend-(my 1st Border Model build BTW;)- Ill prob build the Ryefield StuG IIIG w/interior kit as a comparison, as I LOVE Ryefields kits w/full interiors! -GORGEOUS build BTW, I just cant get over how close our build/painting styles are!...Ha! -Instead of pre/post shading, I follow a similar paint path: 1-Usually apply ATAK Zimmerit if needed, then prime w/rattle can grey... 2-Spray Tamiya XF84 Dark Iron together w/"model master" red oxide/rust... 3-Hair spray... 4-Spray TAM Dark yellow & camo colors... 5-Chip it up... 6-Apply pin washes with TAM black & brown panel liners.. 7-Then I build up layers dry brushing lighter shades of paint from darkest shade to lightest on all the colors used-(For instance: To do so for TAM XF60 Dark Yellow, I mix XF60 with common white latex paint in tubes, which provides for a THICK, highly dry-brushable mix. I use 2-3 differing shades for this. The thicker latex/acrylic DB paint catches on the previously exposed/chipped edges wonderfully, then providing DEPTH & faded paint wear areas that resemble the real thing in high use, wear & tear areas, as the red primer still shows underneath it... 8-Then Ill pin wash again & repeat the process, building depth... 9-Then use the "sponge chipping" technique on all high-wear corner areas of the steel... 10-Then dull coat it/apply dry transfers or decals...;)

@creightonleerose582 Жыл бұрын

Dont mind my highly dedicated line-crossing YT censor. That wasnt my work/hand...Uggggh...

@smc-2 Жыл бұрын

Let's fully enjoy the world of wonderful hobbies each other. Thank you for your long comment.😄

@jimmylight4866 Жыл бұрын

Could you build the coliseum behind it like in the famous Brummbär reel.

@smc-2 Жыл бұрын

Thank you for the interesting comment.🍺

@williamkuhns2387 Жыл бұрын

Is the "zimmerit" factory molded into the model plastic?

@smc-2 Жыл бұрын

It is an optional part of Tamiya and it is a specification to stick like a sticker.🍎

@dantisthemantis2186 Жыл бұрын

interesting technique I personally would use a black surface primer instead of german red brown to cast realistic shadows but great job!

@smc-2 Жыл бұрын

Thank you.👍😄🍎

@mikethebike2456 Жыл бұрын

🏍️ The Germans used a red oxide primer.

@kevinwood5005 Жыл бұрын

A true work of art. Wonder if this guy does tattooing as well.

@smc-2 Жыл бұрын

I didn't get a tattoo.✋

@survivalgabriel7716 9 ай бұрын

Can you please send the tutorial for the figures in the next videos?? Awesome work!

@smc-2 9 ай бұрын

Thank you for your comment.🍎🍎🍎

@handokobambang9585 Жыл бұрын

what kind of material camouflage nett ?

@smc-2 Жыл бұрын

It's a tablecloth. It's like a slightly coarse gauze.😄

@Eekhorn 2 жыл бұрын

Great video again! I was not brave enough yet to try camo lining without camo-putty 😄 What size needle do you use?

@smc-2 2 жыл бұрын

I use 0.2mm size. It's a Tamiya product. Thank you for your comment.

@lotus4405 2 жыл бұрын

멋지고 최곱니다. 👍👍👍👍👍👍👍👍👍👍👍👍

@smc-2 2 жыл бұрын

감사합니다.✋

@WW2GERMANMILITARIA123 Жыл бұрын

What size needle you use in your air brush my friend top build great man you are truly talented guy 😮🏴󠁧󠁢󠁷󠁬󠁳󠁿greetings from wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿

@smc-2 Жыл бұрын

The airbrush size is 0.2mm. Thanks for your comment.🍺🍺🍺

@WW2GERMANMILITARIA123 Жыл бұрын

You deserve every bit of respect 😁👍

@davidb6183 Жыл бұрын

Потрясно

@smc-2 Жыл бұрын

Спасибо.👍

@calcite.belemnite Жыл бұрын

It's like u travelled to 1944, miniaturized a tank, and brought it back.

@smc-2 Жыл бұрын

I'm glad you enjoyed it. Thanks for your comment.☀️

@calcite.belemnite Жыл бұрын

@@smc-2 I've learned lots of techniques from you and Plasmo

@smc-2 Жыл бұрын

@@calcite.belemnite I also admired Plasmo and learned a lot from it. he is a great pioneer.👍

@silvestersze9968 4 ай бұрын

How do you control your airbrush to the minimum air and paint flow after the oxide red surfacer on the dark grey?

@smc-2 4 ай бұрын

I don't really understand the meaning of the question. I'm sorry.🍉🥝🫐

@silvestersze9968 4 ай бұрын

@@smc-2 Oh, I’m sorry. I mean how to make the airbrush less power of spray for small areas application? I never set or adjust pressure on air compressor. Do I need to do that? 😅

@smc-2 4 ай бұрын

@@silvestersze9968 If you can adjust the pressure of the compressor, lower it. You can do detailed work with ease. If you can't adjust the pressure, you'll have to work carefully and slowly.🥝🍑🫐

@silvestersze9968 4 ай бұрын

@@smc-2 Okay, okay… let me try that. 👍🏻🙏🏻

@georgelopez9488 Жыл бұрын

Who's the music by very relaxing?

@smc-2 Жыл бұрын

In the description column of each video, information about the music used in the video is written. Please take a look. Thanks for your comment.🍰

@uropepe 2 жыл бұрын

Great video and nice model. But, is it realistic to put canvas on the engineroom air-ventilation openings? I am convinced that no german tank commander would allow this as it could start burning or even influence the efficiency of the engine below.

@smc-2 2 жыл бұрын

Well, it might be. Thank you for your comment.

@Cherb123456 Жыл бұрын

Wow!

@smc-2 Жыл бұрын

🍎✋😄

@gillesdumas3609 Жыл бұрын

Magnifique! bravo. Très belle maquette. Juste un détail, une petite erreur, le Brummar est sorti en 1942 et les insignes de casques ont été retirés en 1941. D'autant plus que la maquette est couverte de Zimmerite posé à partir de décembre 1943. Un simple coup de peinture sur les casques serait judicieux.

@smc-2 Жыл бұрын

This is a point that many people have already pointed out. As much as I am ashamed. Thanks for your comment.👍

@ivoferin8176 Жыл бұрын

Could you tell what is the zimmerit? PE? resin sheet? TY

@smc-2 Жыл бұрын

Are you referring to the Zimmerit Coating Sheet used in this model? I don't know the details of the material itself.✋

@ivoferin8176 Жыл бұрын

@@smc-2 thank you.

@smc-2 Жыл бұрын

@@ivoferin8176 You're welcome, sorry I couldn't help you.😄

@ivoferin8176 Жыл бұрын

@@smc-2 no problem. It seems resin, was it malleable? The "damaged" areas were already there or did you do it yourself?

@smc-2 Жыл бұрын

@@ivoferin8176 I think there will be no problem. The reason why it is damaged in the video is because I intentionally peeled it off and left it as a damage mark.👍

@josemariazaeraheranz7973 Жыл бұрын

Gran trabajo. Sólo quitaría las calcas de los cascos. Al final de la guerra ya no se ponían.

@smc-2 Жыл бұрын

Gracias por tu comentario.🍺

@albertozagallo7105 Жыл бұрын

great job, what color did you use for the miniatures? Helmet and uniform?

@smc-2 Жыл бұрын

I mix and use colors with a ratio of 85% field gray (XF-65) + 15% buff (XF-57). Thank you for your comment.👍

@albertozagallo7105 Жыл бұрын

thank you, very kind ... wonderful work, congratulations

@smc-2 Жыл бұрын

you're welcome. I look forward to working with you.😄

@albertozagallo7105 Жыл бұрын

ooh thanks, but i'm a novice, when i finish the work I'll show you the result, definitely not your level 😅

@smc-2 Жыл бұрын

@@albertozagallo7105 It's a hobby world, so it's best to enjoy it casually, not the result. Well then.👍

@uraigroves7898 Жыл бұрын

Great job!! But you made one mistake- after 1940 the Germans didn't use the black white and red TRI-shield decal on their helmets...aside from that you work is amazing!!!

@smc-2 Жыл бұрын

I agree. We've had a lot of comments pointing out that. As a result, my lack of knowledge was proven. However, there is no change in my attitude of casually enjoying modeling as a hobby. Thank you for your continued support. Thanks for your comment.😅

@michelecatozzi6856 2 жыл бұрын

Bello!!!!

@smc-2 2 жыл бұрын

Grazie.😄👍

@sierrahobbys1883 2 жыл бұрын

Beautiful work my friend 👏 ❤. Are they also Tamiya figures?

@smc-2 2 жыл бұрын

The two figures are from Tamiya's kit [German Infantry Set (French Front)]. But in the end, the two have replaced their heads. The head used is also from Tamiya's kit [German Defense Force Tank Soldier Set].😅

@thecreblacorda6935 Жыл бұрын

Sturm tiger next?

@smc-2 Жыл бұрын

What do you think? I'll leave it to your imagination.🍰

@user-ur5wd9vr2o Жыл бұрын

めちゃくちゃ素晴らしい作品でした！感動しました！最近プラモデを始めた初心者ですが、いくつかお伺いしたいことがあります。１、2:33「チッピングのためのヘアースプレー」についてですが、こちらは普通に髪型をセットする時に使うものって合ってますでしょうか。これを代替するプラモデル専用のものはありますか。２、9:01「...カラーモジュレーションを軽く掛けます」、こちらのカラーモジュレーションのメーカーや商品の名前を教えていただけますでしょうか。色々聞いてしまい申し訳ありません！よろしければ、ご回答お願いします！

@smc-2 Жыл бұрын

1.普通の350円くらいの安いヘアーセット用のヘアースプレーです。プラモデル専用のものではAKインタラクティブ WORN EFFECTS（剥がれ表現液）と言うものがあります。検索してみてください、結構お高いです。 2.カラーモジュレーションはそれを適用する色、例えば緑としましょうか。緑に白やバフ（明るベージュ系の色）を混ぜて明るい緑を作り、それを使ってカラーモジュレーションをかけます。人に聞くのは簡単ですが、自分で調べて研究しないと、おそらく全く身に付きません。でもコメント下さってありがとう。🍰

@user-ur5wd9vr2o Жыл бұрын

@@smc-2 ご丁寧に回答いただき、ありがとうございます！確かにおっしゃる通りですね、、今後色々調べておきます！