Brushing & Polishing Watches Is EASY!
Рет қаралды 4,333
Жыл бұрынIn this video I brush the centre links of the Cestrian and I also polish the Tandorio clasp and dry it out after it's dip in Herman, my water pressure tester.
Here are the links to the items featured in this video. Some links are affiliate links.
Tandorio - s.click.aliexpress.com/e/_DB1...
Cestrian - www.watchnation.com/
Sanding Pads 50 for £15 - s.click.aliexpress.com/e/_DlS...
My eBay store where I sell lightly used watches to fund the purchase of more watches to review!
www.ebay.co.uk/str/ilikewatch...
I Like Watches Patreon Page
/ ilikewatches
PERKS for as little as $1 a month
1. Monthly Watch Giveaway Competitions
2. 10% off "Buy it Now" Watches from eBay
3. 5% Discount on eBay "Auctions"
4. Access to the ILW Patreon Page
5. Access to all the channels on the ILW Discord Server
If you are interested in joining and want to know more, please email me...oldmantimegary@gmail.com
MY OTHER KZfaq CHANNEL
I Like Watches 2 - / @ilikewatches
HERE ARE SOME MORE USEFUL LINKS!
Patreon - Thank You!
/ ilikewatches
Instagram - Follow me!
ilike_watches_
James Instagram (Exciton watch designer)
JF_watches_99
Harvey at Parkland Printing & Graphics (official printer for the Exciton project)
www.ppandg.com/
Twitter - Follow me!
@ilike_watches_
DEAR KZfaq AND VIEWERS!
The watches in this video are originals or homages. These are not fakes or counterfeit. They are perfectly legal and anyone who reports this channel to KZfaq for the promotion or selling of fake or counterfeit products is doing so knowing that this channel is not breaking any of the terms and conditions stipulated by KZfaq.
Any music used in this video is owned by KZfaq and I am also legally entitled to use it. The pictures are my own or I have obtained legally with permission for commercial use.
I have been careful with my use of any trade marked terms in this video relating to any other watches. None of the watches have other brands trademarked terms displayed on them. I have not breached any trademark laws.
Homage watches are legal as long as they do not carry the name or trademarked terms or names of the original maker which no watches in this video do.
Thank you for your support!
Gary
I Like Watches
@dunderhay9169 Жыл бұрын
The brushing looked very good 👍. For the flat polished area, I would have masked the brushed areas with electrical tape and used a similar cloth but stretched over a small block of wood, that should ensure the surface stays as flat as possible. First comment ha ha!
@paulhiggins8774 Жыл бұрын
Gat a proper buffing machine and learn how to do it correctly, no more rounded edges
@dunderhay9169 Жыл бұрын
@@paulhiggins8774 a misused buffing machine is the fastest way to create rounded off edges that I know of.
@paulhiggins8774 Жыл бұрын
@@dunderhay9169 leave it to professional people
@artbanks27 Жыл бұрын
Very useful. Thanks! Maybe a sandblasting finishing tutorial next 💁♀️
@garystables8509 Жыл бұрын
Following watching this video I promptly bought the recommended sanding strips, took half an hour totally transformed the look of my Cestrian , cheers Gary 🍻
@ILikeWatches2 Жыл бұрын
Awesome….it’s easy when you have the right tools!
@ignaciopadilla5150 Жыл бұрын
Turned out great... I didn't cross my mind to use a car polish material. Great info
@terrybryant6899 Жыл бұрын
Shocked how great and easy this was. Good job that man !
@garybrown4671 Жыл бұрын
Awesome! My wife might need to order more nail files...
@AliasEveWatches Жыл бұрын
That looks so satisfying! 😮
@drwindsurf Жыл бұрын
This is a timely reminder - Thank you Gary I just got a new (to me) watch that has more wabi than I would like and I have been thinking about brushing the centre links on an Invicta bracelet I have. As far as drying out a watch - I have used rice with success in the past and I keep a ziplock bag of silica packets handy for any watch that springs a leak - just undo the case back and leave it in the bag for a few days - works great.
@ATMyller Жыл бұрын
If you more grit to choose from, sandpaper on a mousepad works as well.
@TheJaime9526 Жыл бұрын
Hagerty cloth (got it on Amazon) for stainless steel might be a decent alternative to cape cod. And for the deep desk dive scratches, you can use those same nail polish files to sort of cross hatch the polished area to basically brushed , then spend a bit of time polishing it back to a shine. Polywatch works even :)
@brianmsahin Жыл бұрын
Excellent video Gary. I did my first brushing and polishing a few weeks ago on my Mission to Uranus Pagani. The edges of the case on the side opposite the pushers was a little sharp. So I got some 600 emery paper and brought it to a nice smooth rounded condition. Completely changed the feel of it. But before I remembered to use masking tape on the brushed side I put a small scratch on it. I was very annoyed with myself. So, I got one of those kitchen scouring pads and using the green rougher side spent an hour brushing it in one direction across the whole side and the scratch is gone.. I did remember to put masking tape over the top polished surface this time!! 😁
@kobusvanrensburg4092 Жыл бұрын
Nice one Gary. Another one you should possibly address in a video is polishing out scratches on mineral crystal. Everyone has a watch with mineral, and dealing with scratches is something we all face at some point. Check out diamond paste as a method of doing that.
@darrenjones2070 Жыл бұрын
Great video!
@statlerwaldorf7130 Жыл бұрын
Great video Gary, thanks for the learning points :)
@Giuseppe_est.2008 Жыл бұрын
awesome video… tutorial, will try this in my older bracelet Thanks Gary.. regards !!!
@user-tq6gg7ln4g Жыл бұрын
Very useful! Thank you so much, Gary! I've also got some scratches on Berny Railway v2, unfortunately.
@stevenrobertson6656 Жыл бұрын
I don't know if it would work on watches but I use polishing/stropping compound on my knives to get a super sharp polished edge. It is a very fine abrasive. Might be worth a shot.
@AlexanderB. Жыл бұрын
Nice job! I've never tried brushing but my preferred method are Cape Cod cloths. I never experienced striping. It says in the instruction manual that dry buffing the oil from a Cape Cod cloth with a soft cloth is the most important part.
@briansutherland5919 Жыл бұрын
Used Cape Cod cloths in the early days of Rolex Explorer ownership to remove hairline scratches to the bracelet. I now have a very shiny (almost mirror finish) oyster bracelet 😫
@MaroMarenio Жыл бұрын
I have to send you some of my watches 😜
@karlsenula9495 Жыл бұрын
Now show us how to Zaratsu polish it Gary??? 😏
@Shri_V Жыл бұрын
Can we use a hairdryer blowing hot air instead of a puffer?
@dunderhay9169 Жыл бұрын
I would say no, you don't want to evaporate the oil in the movement. I dived into a pool in an old watch once, took the back off immediately and left it in the sun to dry. It stopped rust forming but the movement stopped as there was no oil left.
@brianmsahin Жыл бұрын
You can use the hairdryer but only on the cold setting. Two problems with hot air, it can, as the other commentor said, dry the lubricant and secondly, heat can expand and damage the internal parts including the hairspring which might also knock the accuracy off majorly.
@Shri_V Жыл бұрын
@@dunderhay9169 That makes sense, thanks.
@Shri_V Жыл бұрын
@@brianmsahin Good points!
@paulhiggins8774 Жыл бұрын
Not how the professionals do it , but okay on a cheap watch
@BAF605 Жыл бұрын
Don't do this with a Rolex unless you like throwing money away. OK for something like the Cestrian.
Teddy Baldassarre
Рет қаралды 128 М.
Immersed
Рет қаралды 91 МЛН
I Like Watches 2
Рет қаралды 15 М.
I Like Watches 2
Рет қаралды 29 М.
Red Dead Restoration
Рет қаралды 3 МЛН
WATCHing James
Рет қаралды 23 М.