Brushless RC Motor Bearing Replacement - Spektrum 3200kv (spmxsm2000

Brushless RC Motor Bearing Replacement - Spektrum 3200kv (spmxsm2000 - Armma Granite 3S)

Рет қаралды 34,705

Күн бұрын

After spending more time than I want to admit, I finally figured out how to remove, correctly size for purchase, and re-install the bearing and parts of a brushless rc motor from my Granite 3S V3. It is a non-sensored, 4-pole, brushless motor from Spektrum labeled as spmxsm2000 and has a can size of 3660. The entire process can be done in as little as 15 minutes, or less, depending on how much difficulty you have removing the worn bearing. If you have any issues or questions, feel free to ask below in the comment section and I will do my best to respond quickly.
TRB 5x16x5 Bearings (10) on Amazon: amzn.to/3hiz2my
TRB 5x13x4 Bearings (10) on Amazon: amzn.to/2Q5GWV8
Motor in this video (Spektrum 3200kv) on Amazon: amzn.to/3vrEirk
RC in this video (Arrma Granite 3S V3) on Amazon: amzn.to/3xkaC0L
Please like this video if you got something from it so that others may find this information.
Thanks for watching!

Пікірлер: 458

@rcleesd 3 жыл бұрын

I bought these bearings on Amazon. Here are the links to both bearing sizes: TRB 5x16x5 Bearings (10) on Amazon: amzn.to/3hiz2my TRB 5x13x4 Bearings (10) on Amazon: amzn.to/2Q5GWV8

@MonkeyGun77 3 жыл бұрын

You guys are awesome thank you

@kenjinadres5806 3 жыл бұрын

Thank you

@carolynhitt1916 3 жыл бұрын

Okay well when I tried to put the 5*16*5 in it was bigger

@rcleesd 3 жыл бұрын

@@carolynhitt1916 V3 has the big and small bearing....V1 and V2 have two of the smaller bearings.

@carolynhitt1916 3 жыл бұрын

@@rcleesd okay so I must have a piece of bearing stuck in the end of the motor how do I get it out

@keijimorita1849 2 жыл бұрын

Thank you! I almost never like videos but your's deserves it. Only place to find this info!

@rcleesd 2 жыл бұрын

Thank you so much! That is the main reason I made this video was because I couldn't find any information out there on it anywhere. Thank you so much for the like and comment, it means a lot to me.

@REPORODGE 7 ай бұрын

YOU EXPLAIN THINGS EXTRAORDINARY WELL and I don’t care about my caps I want everyone to see this comment!

@rcleesd 7 ай бұрын

Thank you so much, I really appreciate it!

@jamest1723 3 жыл бұрын

Man your video helped me avoid such a headache! You explained everything in perfect detail! Thank you!!

@rcleesd 3 жыл бұрын

I'm so glad that it helped, thank you for watching!

@HarleyForMayor 3 жыл бұрын

You have given me information on everything I cant find and delivered it in the most helpful manner! Much obliged partner!

@rcleesd 3 жыл бұрын

I'm glad I could help!

@MarkDaams Жыл бұрын

I replaced the front bearing using your guide. I bought the bearings that you linked to. Guess what happened. The new bearings broke within 30 seconds of driving. 😮 I bought a new motor, hopefully that one lasts longer.

@rcleesd Жыл бұрын

What a bummer! These rcs tend to get a lot of dirt and sand in them quickly. Can I ask what you were running on? Clay, grass, asphalt, dirt, sand?

@justinnagle4937 Жыл бұрын

Great video man! No B.S. just straight technical data to help get the job done. Really appreciate this

@rcleesd Жыл бұрын

Thank you 🙏

@rudysrc6652 3 жыл бұрын

Great information Lee!! Thanks for taking the time to lay it out in detail. All this information is critical to doing this hobby without just throwing money at your problems. Besides, there is a level of satisfaction knowing you were able to fix your own parts!! You the man Dogg!! Keep doing it don’t stop!!

@rcleesd 3 жыл бұрын

Thank you so much!!

@shiftx1579 3 жыл бұрын

Great video mate, saved me the time looking for bearing sizes and part numbers etc props👌

@rcleesd 3 жыл бұрын

Thank you for watching!

@davefehr1386 2 жыл бұрын

Great video! I do repairs for a local hobby shop and ran into this bearing issue with one of the repairs. You saved me doing a lot of research. Thanks!

@rcleesd 2 жыл бұрын

Glad it helped!!

@blackmamba1870 Жыл бұрын

Helpful video.. rc shop was pushing new motor but all I needed was a new shaft side bearing

@rcleesd Жыл бұрын

Awesome! Glad it helped!!

@Mr.NiceGuy80 2 жыл бұрын

thank you for this video. saved me $90 instead of buying a new motor, I already have it taken apart and ready for the new bearing! I appreciate you! new subscriber!

@rcleesd 2 жыл бұрын

Thanks for subscribing, I'm glad it helper! Stay tuned for more!

@ock105 Жыл бұрын

Man I wish I would've found this in the summer...but I can now save that old motor. Thank You

@rcleesd Жыл бұрын

You're welcome!!

@1lunifyd 2 жыл бұрын

Absolutely extremely helpful thank you for taking your time to find the information and share it with us just ordered my bearings thank you👍👍👍

@rcleesd 2 жыл бұрын

I'm glad it helped, thanks for watching Luni!

@BigCheese85 3 жыл бұрын

Thanks for your video. I no longer have a headache about my busted RC Big Rock lol. Subscribed!!

@rcleesd 3 жыл бұрын

I'm glad that it helped!!

@stolencherry48 2 жыл бұрын

Thanks for the video! Just had the motor completely lock up on my big rock from what I assume was heat or dirt. One new ceramic bearing and we’re back in business.

@rcleesd 2 жыл бұрын

Good to hear you got it back up and running! Thanks for watching!

@georgeadragna5625 2 жыл бұрын

Huge help in replacing my motor bearings! Thank you!

@rcleesd 2 жыл бұрын

You're welcome!!

@morganyates6598 3 жыл бұрын

Thanks man!! Awesomeness.. I really do appreciate this video and your time that it took to figure all this out And to make the video!! Thanks for the link for the bearings!! Your a lifesaver my man!! Just ordered me a set ✅

@rcleesd 3 жыл бұрын

Awesome! I'm so glad it helped, thanks for watching and letting me know that you liked it! 👍

@thefriendlyteenager726 2 жыл бұрын

Thank you soo much! I really didn’t want to pay 104.99 for a new one. You’ve earned a new subscriber

@rcleesd 2 жыл бұрын

I'm glad it helped, thanks for watching!

@natedawg5150 3 жыл бұрын

Thank you man I just bought arrma v3 when I do need to replace those now I know how so I appreaciate your knowledge.👍

@rcleesd 3 жыл бұрын

Thanks for watching!

@markmccullough6873 2 жыл бұрын

Great stuff new to your channel.I found answers thank so much.I was having a hard time myself,then i found this channel.Thanks for taking time to do the research and sharing it with us.See you on the next on.Stay Safe Stay Healthy

@rcleesd Жыл бұрын

Thank you so much, that's why I make these videos and I appreciate the feedback!

@ericpeterson9676 3 жыл бұрын

Thank you my man! Video helped out alot. Ended up pulling my motor back out.

@rcleesd 3 жыл бұрын

Glad it helped!!

@benlandrum75 6 ай бұрын

I have the same V3 Granite and never thought about doing that. Great job on your research. I'm definitely subscribing. 👍

@rcleesd 6 ай бұрын

Thank you!!

@benlandrum75 6 ай бұрын

@rclee6 You're welcome sir.

@joeshow750 3 жыл бұрын

Thanks man. Even though it's pretty simple it's still nice to have a vid to watch.

@rcleesd 3 жыл бұрын

You are very welcome, thanks for watching!

@TechWizMaster 2 жыл бұрын

Cant thank you enough for this video...thanks a BUNCH for all these precious informations now made easily available...arrma and spectrum should send a new truck your way just for this video...

@rcleesd 2 жыл бұрын

You are very welcome!!

@heavymetalrc7520 3 жыл бұрын

Awesome video bud. This is great info to have when the time comes. Definitely saving this one.

@rcleesd 3 жыл бұрын

For sure!

@phillipgardner5836 3 жыл бұрын

You did great explaining everything, my new bearings from trb rc just came in, so I'm about to tackle the rebuild

@rcleesd 3 жыл бұрын

Awesome! Good luck!!

@phillipgardner5836 3 жыл бұрын

@@rcleesd turned out flawless, much quieter and probably 10% faster

@rcleesd 3 жыл бұрын

@@phillipgardner5836 Glad to hear it!

@buddahGump 3 жыл бұрын

Love the details. Thanks for taking the time ✌

@rcleesd 3 жыл бұрын

You are absolutely welcome!!

@trappizze22 2 жыл бұрын

This is such a valuable video. Tnx so much I just bought my bearings.

@rcleesd 2 жыл бұрын

Awesome! I'm glad it helped!!

@rossprice8586 8 ай бұрын

Sound research and how to, clearly explained. Thanks!

@rcleesd 8 ай бұрын

🙏 Thank you!

@wade7959 3 жыл бұрын

A smiley face down is a frown 🙁. Excellent video! It was VERY helpful! I don't have this exact motor, but I think this will help.

@rcleesd 3 жыл бұрын

I'm glad it helped!! Thanks for watching!

@SuppleBun 11 ай бұрын

you are singlehandedly doing the rc god's work for us bless u

@rcleesd 11 ай бұрын

🙏 Thank you!

@corymra 3 жыл бұрын

My Big Rock stopped moving yesterday and I thought I was going to have to replace the motor but after watching your video I was able to determine my bearings are shot. You just saved me from having to buy a new motor. Thank you and just clicked that sub button.

@rcleesd 3 жыл бұрын

Awesome!! If you ever lose steering, check the plug from the radio to the esc...I had that come loose one day and it was an easy fix, but almost overlooked it! Also, if you ever lose throttle after big jumps, check the 3 motor wires at the bullet connection, those sometimes come loose. Thanks for watching!

@corymra 3 жыл бұрын

@@rcleesd Great information! I love how fun this hobby is, and I love the willingness of the community to help others. Wish I would of gotten into this sport years ago.

@rcleesd 3 жыл бұрын

@@corymra Me too. It really has been an awesome way to connect to others in thee hobby during this virus stuff.

@crisjj2 3 жыл бұрын

Great video sir. Appreciate the time and effort that went into making this video. Saved me 100 pounds so will defo subscribe.

@rcleesd 3 жыл бұрын

I'm glad it helped, thanks for watching and subscribing!

@tyrellcorp2118 3 жыл бұрын

Thank you. I never knew about the beveled side of the spacer. I recently checked my motor and the spacer was slightly chipped. I think it's because it was backwards. Replaced it the correct way with a spacer from another motor.

@rcleesd 3 жыл бұрын

Awesome, glad it helped!!

@colinleonard2541 3 жыл бұрын

Thanks for the video man! The same thing happened to my big rock v3 on the 4th run. Unfortunately half of the bearing is still in the motor and I can’t get it out but luckily horizon is sending me a new motor when they get off of back order 👍

@rcleesd 3 жыл бұрын

Nice!! They just sent me the V2 motor made by Arrma and said they might not be able to get that spektrum one anymore (probably because the bearings keep failing would be my guess).

@colinleonard2541 3 жыл бұрын

@@rcleesd yeah they might send me one as well because it’s been a month since it’s happened

@robertobassi1843 3 жыл бұрын

Very intresting!!thanks a lot .davvero interessante ed istruttivo un corso breve di meccanica

@rcleesd 3 жыл бұрын

Grazie mille!

@doubleaaaron 3 жыл бұрын

I bought a v3 big rock as soon as they came out and a week later the bearing ( large side ) exploded and locked the motor up. At the time I didnt know what the issue was. Arrma sent me a new motor same spec so I installed that and the old motor is sitting in my parts box. I did and would reccomend putting a small o ring on the shaft behind the pinion gear. It will keep dirt out. Just dont put more than one as it will cause the motor to drag against the end cap and will eventually burn up. I did this with the new motor and it has been perfect since. Thanks for the video! Great info.

@rcleesd 3 жыл бұрын

Thats a great idea about the o ring! Thanks for commenting and sharing.

@DMsReptiles 2 жыл бұрын

Excellent video my friend!! My senton is locked up and I didn't know why. This video was incredibly helpful. You got my sub and the like man ❤️🤘

@rcleesd 2 жыл бұрын

Thank you so much!!

@bjornenglund905 Ай бұрын

Awesome video, just what I was looking for!

@rcleesd Ай бұрын

You're welcome!

@voyaddit5509 3 жыл бұрын

Thank you for the bearing dimensions.. greatly appreciated

@rcleesd 3 жыл бұрын

You are welcome, glad it helped!

@kevinchambers4219 3 жыл бұрын

I appreciate this. My Typhon 3S V3 quit on me after a couple weeks with a failed bearing in the motor just as you have shown and replaced. I will be ordering these bearings as well for my new motor when it finally arrives. The original motor was so locked up, I couldn't remove the failed bearing. It was in shards.

@rcleesd 3 жыл бұрын

Man, that's a bummer! I'm glad you found my video...keep an eye on that exposed bearing and replace when it gets worn and your new motor will last forever! Thanks for watching.

@colinleonard2541 3 жыл бұрын

Same thing happened to my big rock!

@BETTERTECH824 3 жыл бұрын

thanks man you made my bad day a little better....

@rcleesd 3 жыл бұрын

Glad I could help!!

@jasongregory3950 3 жыл бұрын

Thank you. I have my senton blx v3 apart cleaning, relube and inspection. I was wondering about this.

@rcleesd 3 жыл бұрын

You're welcome, thanks for watching!

@rustylamphear8699 3 жыл бұрын

Same boat for me I have 2 both same issue great video thank you for sharing

@rcleesd 3 жыл бұрын

I'm glad it helped, thanks for watching!

@BenXcubes 3 жыл бұрын

Great vid... after reading some comments on FB groups saying that this bearing change was difficult and then seeing this vid has me feeling great on how easy it is.. Great job man

@rcleesd 3 жыл бұрын

Thank you!

@limeisrichard 3 жыл бұрын

head on crash for the second time on my typhon and just found that rattle in the motor shaft, motor doesn't sound smooth and quite anymore, thanks for the video now i gotta wait for the bearings!

@rcleesd 3 жыл бұрын

Thanks for watching!

@studio4fifteen 3 жыл бұрын

Very helpful post. My typhon motor froze up and horizon is shipping a replacement but I took my old motor apart And the same bearing was obliterated. Just balls and shards of metal...and grease of course 🙄. Can't get the race of the dead bearing to budge though.

@rcleesd 3 жыл бұрын

It is very difficult. I believe the housing and cap are aluminum, so maybe try to heat it up and the steel bearing shouldn't expand as much as the aluminum, and you might be able to get the rest out. Good luck and thanks for watching!

@jasonridgeway4541 2 жыл бұрын

An excellent and informative video! Thank you!!

@rcleesd 2 жыл бұрын

Thank you!! I appreciate it 👍

@ChrisB-ub5ix 3 жыл бұрын

Thanks dude I appreciate the attention to detail

@rcleesd 3 жыл бұрын

You're welcome. Thanks for watching!

@ernoberkhout5749 2 жыл бұрын

Very clear video. Much appreciated, thanks

@rcleesd 2 жыл бұрын

You are very welcome!

@dpc-bski343 3 жыл бұрын

It drives me crazy that they don’t give basic information like that, knowing we’re going to need it at some point. How hard is it for company’s to let us know the bearing sizes? I’ve spent hours looking up basic, easy for manufactures to let us know, information. Especially, new people like myself that know how to fix thing, just need a stupid size. Thank you for going through all that to save me and all of us time. Btw I hear lots of bad reviews because of the bearing issue on that motor, that’s why I looked before it happened. Super super appreciated!!!!

@rcleesd 3 жыл бұрын

I felt the exact same way and was the main reason I decided to make the video as I couldn't find much on it, even here on KZfaq. Thank you so much for watching and commenting...I'm glad it helped!!

@jamiewellman6986 2 жыл бұрын

I made them send me another motor for free they got a 2 year warranty..I'm fixing to see if new bearings fixes the original motor

@68sixgun 2 жыл бұрын

Just did mine in a new typhon v3 as a preventative measure as there are lots of reports of them disintegrating pretty fast although I suspect a tight mesh from factory is contributing a lot. Mine had a black rubber seal on and seemed perfect but hey ho it's done now, I put an SKF one in so hopefully that'll last a good while. TOP TIP- to get the old bearing out easily use the t bar from the wheel wrench and tap it down while holding the motor, comes out easy.

@rcleesd 2 жыл бұрын

Awesome! Thanks for the tip to get the old bearing out!

@smokeganyavk 3 жыл бұрын

Amazing video! This info is gold !!

@rcleesd 3 жыл бұрын

Thank you!!

@jeremycravens6973 3 жыл бұрын

I have 3 arrma 3s motors with the bearings locked up. I'm waiting for my new bearings from Ebay. I paid 20$ for 4 bearings! Wish I saw your video sooner. Can't imagine how many people bought a new motor because of a 2$ bearing!

@rcleesd 3 жыл бұрын

Those dang motors! That's why I decided to make this video, it seems to be a very common issue!

@xiong2moua 2 жыл бұрын

Awesome video. My motor seized up. The pulled the rotor out and all the bearings just fell out. Now the hard part is taking out the outer ring of the bearing. Thanks for the video.

@rcleesd 2 жыл бұрын

Good luck with that outer ring of the bearing. Try to heat up the casing (it's aluminum so should change shape quickly) by either leaving it in the sun for a while or a blow dryer. Then, try to cool only the bearing (ice, frozen nail/screwdriver) by touching it with the cold item. Let me know how it goes!!

@xiong2moua 2 жыл бұрын

Thanks for the tip. I will give it a try and let you know.

@xiong2moua 2 жыл бұрын

I got it out. It was pretty simple. I used a 1/2-13 flat bottom tap. Screw in the tap like I was going to thread a hole. Made sure it bottom out. Flipped the motor 180 and hit it out with a punch. I'm not a guy who likes making videos but might try to post something up to help others too.

@rcleesd 2 жыл бұрын

@@xiong2moua Awesome!!

@nicksdroid63 2 жыл бұрын

I like your little plant container...

@rcleesd 2 жыл бұрын

Thanks!!

@bassmek21 3 жыл бұрын

@RC Lee hey thanx for the link to bearings. My bearings were so bad well just the one in the nose that i couldn't get any numbers off of it , i got the number from the rear bearing and it ended up being to small when i took the race out and matched it up im in the process of repairing my motor only after about 9 or 10 runs and the bearing is blown out

@rcleesd 3 жыл бұрын

No problem! Bummer it went out after only 10 runs. Thanks for watching!

@chadriddle3517 Жыл бұрын

Excellent information here . Thanks

@rcleesd Жыл бұрын

My pleasure. Thank you for watching!

@thejpnoel 3 жыл бұрын

Good job. Really nice video. Two thumbs up Thank you

@rcleesd 3 жыл бұрын

Thank you!

@jesse8875 2 жыл бұрын

I appreciate this video so much. thank you!

@rcleesd 2 жыл бұрын

I'm glad it helped, thank you for watching!

@Wotup72 3 жыл бұрын

Great information, keep it up!

@rcleesd 3 жыл бұрын

Thank you!

@charleswayne7221 2 жыл бұрын

Thanks for this! Great info!!

@rcleesd 2 жыл бұрын

You are very welcome, I hope it helped!!

@mosindesire 3 жыл бұрын

Fantastic video and very helpful.

@rcleesd 3 жыл бұрын

Thanks for watching, I'm glad it helped!

@lilrhodyrc6806 3 жыл бұрын

Good stuff man, great info!

@rcleesd 3 жыл бұрын

Thank you!

@jimleconte1969 3 жыл бұрын

Thanks for the info mine just went out and I also couldn't find anything on the motor .

@rcleesd 3 жыл бұрын

No problem, hope this helped!

@timjacobs1600 6 ай бұрын

I am waiting on my replacement bearings. I had to make a Hook from a Small blade Screw Driver as a tool to remove the Rear Bearing.. Used a propane torch to heat the rear cap held by the Pliers.. Then I slowly pride the bearing out.. It was not easy.. I would love to see Bread Crumbs remove Yours...😂 I personally don't believe that at All..

@rcleesd 6 ай бұрын

I definitely didn't do the bread crumb method, haha.

@DarthSeanious 3 жыл бұрын

Super helpful video. Thanks!

@rcleesd 3 жыл бұрын

I'm glad it helped!!

@paulcook8316 2 жыл бұрын

RC LEE, THANK YOU....👍

@rcleesd 2 жыл бұрын

You are welcome!

@vincer8691 2 жыл бұрын

Thank you for your help.

@rcleesd 2 жыл бұрын

You're welcome!

@fatchunk3678 3 жыл бұрын

Exactly what I needed help with, you Legend

@rcleesd 3 жыл бұрын

Thank you!

@Icehso140 2 жыл бұрын

Nothing online...you ain't joking. I plugged the p/n into ARRMA and got no listing for this motor. Thanks for the research and the video.

@rcleesd 2 жыл бұрын

Thanks for watching and commenting! I appreciate it and glad if it helped in any way!

@codyclinton619 3 жыл бұрын

Definitely a great video ,thanks

@rcleesd 3 жыл бұрын

Thanks for watching!

@edgartorres6602 3 жыл бұрын

Thank you you were a lot of help once again thank you

@rcleesd 3 жыл бұрын

No problem, glad it helped!

@rcholic7720 3 жыл бұрын

thank you for this video. it's very helpful.

@rcleesd 3 жыл бұрын

You are very welcome, glad it helped!

@peteg7446 3 жыл бұрын

Thanks for this video. My brand new Vorteks burned out the bearing after 4full 3s packs.

@rcleesd 3 жыл бұрын

That's a bummer, glad the video helped. Thanks for watching!

@peteg7446 3 жыл бұрын

Great info... subscribed now

@rcleesd 3 жыл бұрын

Awesome!

@pugs1377 3 жыл бұрын

You can use a thick grease also instead of bread crumbs. It's an old trick for removing pilot bearings from a crank shaft. Thanks for the good vid!

@rcleesd 3 жыл бұрын

Good idea! Thanks for watching!

@miasam9666 Жыл бұрын

Very informative thanks bro

@rcleesd Жыл бұрын

You're very welcome!

@norcalrc 2 жыл бұрын

Good knowledge, that’s for sharing

@rcleesd 2 жыл бұрын

You're welcome, thanks for watching!

@Funcentric 3 жыл бұрын

Wow! Thanks so much for sharing your discoveries! and explaining it so clearly and with such detail. A lot of videos are a "hey, look I did something amazing" and doesn't really cover how to do it yourself, so thanks for taking the time to explain it so other people can do it too. Guess who has a new subscriber? Who's the idiot who disliked this? Gosh, such disrespect for your hard work.

@rcleesd 3 жыл бұрын

Thank you so much! After not finding any information about it here on KZfaq, I figured it would be worth the time to share the info. I am humbled and appreciate you taking the time to thank me for it. Thanks for watching!

@Funcentric 3 жыл бұрын

@@rcleesd totally. Good info and well put together. Audio was good too. No complaints. Gotta give credit where its due.

@danstew100 3 жыл бұрын

Great video and very well narrated. Thanks for taking the time to make and post this video. It is really helpful as I'm in the process of rebuilding a motor and wasn't aware of the order and orientation of the rear washers.👍👍

@rcleesd 3 жыл бұрын

@@danstew100 Thanks for watching!

@anselrod5699 3 жыл бұрын

very well done !

@rcleesd 3 жыл бұрын

Thank you!

@visionevo 2 жыл бұрын

Great video!! Thank you!!

@rcleesd 2 жыл бұрын

Thanks for watching!!

@bapasrcadventures3619 3 жыл бұрын

Very helpful thank you.

@rcleesd 3 жыл бұрын

Glad it helped, thanks for watching!

@MegaDieseldriver 3 жыл бұрын

Great!!! Thank you so much !!

@rcleesd 3 жыл бұрын

Thanks for watching!

@caspfornia 2 жыл бұрын

Pretty cool thanks for the info 🤘😬🍻

@rcleesd 2 жыл бұрын

You're welcome, thanks for watching!

@Nonya828r74 Жыл бұрын

Thank you so much

@rcleesd Жыл бұрын

You are very welcome!

@hemiboy3923 3 жыл бұрын

Great video thanks for making it .I know for sure it will help many people. I've been stripping my pinoin gear from my v5 typhon since the vary first run .my mesh is correct with my new pinion gear but I'm already noticing wear on it again I will take a look at my bearings because the car is brand new and I'm not sure what els could be causing this

@rcleesd 3 жыл бұрын

I think it is movement in the adjustable motor mount, but not sure that's what it is...definitely annoying!

@hemiboy3923 3 жыл бұрын

@@rcleesd I'll keep a close eye on that thanks for the info

@Killa_b_rc 3 жыл бұрын

Thanks. I appreciate this vid. I’m going to subscribe

@rcleesd 3 жыл бұрын

Thanks for watching and substring!

@g.bjumpsbashing3062 3 жыл бұрын

Nice vid due...helpful👌👌👌

@rcleesd 3 жыл бұрын

You're welcome!

@khaiselhassadi5361 Жыл бұрын

I see you did a wonderful work for changing the motor bearings especially the big one 5x16x5. For me I am still suffering from that. And I couldn’t fit it , so if you don’t mind to show me an easier way

@rcleesd Жыл бұрын

Try heat and cold (freezer or sunshine) to expand the aluminum housing and try putting the bearing in a sealed zip lock bag into the fridge or freezer for an hour.

@dappolajon7008 3 жыл бұрын

Thanks super helpful even tho horizon sending over a new one

@rcleesd 3 жыл бұрын

Awesome! Thanks for watching!

@mikaelkosayan4516 2 жыл бұрын

Thank. You!

@rcleesd 2 жыл бұрын

You are very welcome!

@jackofallmasterofone8940 2 жыл бұрын

Great Content🤛🏾

@rcleesd 2 жыл бұрын

Thank you!!

@jackofallmasterofone8940 2 жыл бұрын

@@rcleesd I Opened My Motor And The Bearings Was Good But The Rotor Was Busted So I Just Ordered A New Motor Cause I Couldn't Find That Part To Fit

@rcleesd 2 жыл бұрын

@@jackofallmasterofone8940 thanks for the update, hope it's going well!

@vincevirina425 3 жыл бұрын

thanjks for sharing

@rcleesd 3 жыл бұрын

Thanks for watching!

@johnnyhaberfield721 3 жыл бұрын

Thanks man.my bearing on my old 4s motor blx just bust.was puzzled until I saw this.hard to find these bearings in England. peace

@rcleesd 3 жыл бұрын

You're welcome! Best of luck finding the bearings, hopefully soon!

@3dconceptsofutah757 2 жыл бұрын

Cheers mate!

@rcleesd 2 жыл бұрын

Thanks for watching!!

@TashaTulipJoeMama 2 жыл бұрын

Thanks so much, I was going to buy a new engine. Thanks

@rcleesd 2 жыл бұрын

I'm glad you found the video!

@skybugproductions7527 3 жыл бұрын

Good video, thanks.

@rcleesd 3 жыл бұрын

Thanks for watching!

@skeletorrc2583 3 жыл бұрын

Very helpful. Thank you!! 🧟

@rcleesd 3 жыл бұрын

Thanks for watching, glad it helped!

@skeletorrc2583 3 жыл бұрын

No worries thank you so much. Got a question too ask? Where do you get those shims on back of the motor. You know the sad face things. I have another motor I'm fixing and now know why it broke on me. Thanks to your video. But I must have lost those when I took the motor apart a year ago. If could tell me what or part number would be great. Thank you!! ☠️💯🥃

@rcleesd 3 жыл бұрын

@@skeletorrc2583 Honestly, I don't know where to buy them. My best guess would be to try to source something similar to those at a hobby shop or Home Depot. I doubt that Amazon would carry them, but possibly on Ebay. Maybe you could try to contact Spektrum directly, but I think you have to go through Horizon. Their solution would be to send a new motor though. Good luck and let me know if you find a solution!

@skeletorrc2583 3 жыл бұрын

I have found some on Amazon that come in a kit. 200+ different sizes. From 3mm too 30mm so we will see. Thank you for responding if they are it I will gladly sure the info with you. ☠️🧟