Рет қаралды 62,379
This is arguably the best modification you can make to any 7x14 mini lathe to increase the depth-of-cut, decrease tool chatter and improve dimensional tolerances and improve surface finishes!.
Before this modification, I was turning a max D.O.C of 0.030", which is okay for this caliber of lathe, but it was not without chatter, galling and loads of other surface imperfections.
Another huge benefit from this mod is the ability to easily do parting operations, especially in difficult to part materials like steel and titanium. It's such an easy modification, I don't know why it took me so long to do it!
Accessing those two socket head cap screws to rotate the cross slide is as easy as loosening and rotating the QCTP to 45 degrees to expose the mounting holes.
If you like the content I produce, you can help support the channel here:
buymeacoffee.c...
Affiliate links to stuff used in the video:
TOOLS:
Quick Change Tool Post - amzn.to/3yt5r4w
Evolution Rage Metal Cutting Miter Saw - amzn.to/3QXENXN
3/8" Lathe Turning Tools - amzn.to/3UOonSL
Mitutoyo Digital Calipers - amzn.to/44RJhEZ
similar 7X14 mini lathe - amzn.to/3K8PtPp
Camera Gear and Audio:
Fujifilm XT-4 with FUJINON XF16-80mm F4 Lens - amzn.to/4brxr71
Rode Video Microphone - amzn.to/3WPVQ1D
K & F Tripod - amzn.to/44X9Wk4
Gaming Laptop for editing:
ASUS Zephyrus Laptop - amzn.to/3WKfxbl