The display that the ebike has comes with locked very important parameters such as PAS sensitive and PAS strength. The company does not mention this anywhere, and the solution it suggests is to buy a new, same display that is unlocked of course. Unacceptable. All ebike parameters can be adjusted, even the other models of the Samebike company, only this one is locked. I think it's information that all prospective buyers should learn.

very informative videos, nice channel i have an eleglide F1, it is the same bike more or less, you can do the same "hack" for your controller as you did for the battery, in my case was rattling a bit

Could you please tell me what the PAS Strength is, on the advanced menu on the NEW controller you got? As my PAS only does 250W but throttle does 500W thank you.

What wire did you change first ?

Thanks for the video... I've got the exact same issue. I wasn't sure it if was me or a setting or a fault with the bike. Throttle works fine but the PAS has almost no power, contacted the seller and waiting for reply.

Hi there, great informative video. I was wondering my friends Samebike LO26 just recently appears to just losing power. Initially we thought it might be a battery issue but on switching the battery with another Samebike, battery was performing reasonably well or normal. Also we noticed that he could not change a lot of the programmes, for example P05, P07, P09, P10, etc. So he thought it might be the controller unit. The ebike was bought in July 2021, so unsure if this might be under warranty still. Any advice would be welcome

Hello, I only get 5 amps on peddle assist on the pass 5 setting, and I only get 10 amps on the throttle for 3 seconds before it drops to 8 amps. Additionally, I've noticed that the throttle is not constant; if I hold it down, power comes on briefly before stopping. If there is a problem with my bike, could you kindly assist me in fixing it? Also, have you been able to unlock the settings on the display? It only allows me to change the unit of measurement and the speed setting

Hello can you give me a link for a replacement wheel and motor for this bike.Cheers

My samebike lo26 shows 100% and turns on, yet only stays on for a few minutes then shuts off completely and will not turn back on untill I plug it into the charger. I can immediately unplug it and it turns right back on. Anything like this happen to you or any idea what I should do for a fix. It's my first ebike, I got it at the end of April. Any info is much appreciated. Thank you.

Buddy I hope you can help, my bike over the last few days turns off mid journey on a full battery & won't come on untill I plug it in for 10 mins, worked perfectly before that & have only had it for 2 months.. Any help or knowledge you might have would be appreciated

the PAS on mine is kinda sloppy, it's not smooth, but its like intermittent. What could fix?

My L026-11 is not even a year old, whilst out cycling today it cut out with 45 volt charge still in the battery and now it wont turn on ,only done 300 mile since new. any ideas how to fix ?

Hi friend, how many amps can your samebike motor go maximum? Is it the 750W version?? Because mine (500W version) can go up to 11A.... Thanks

Hi Wayne From Australia here I think I have the same problem. I have tried to contact the supplier and samebike with no response. How did you contact them By the way, I like your videos Cheers

Pronounced Sammy bike