Just what I needed to see regarding the seats, just replaced the heater core in my 97 tacoma 3 days ago, and had to pull everything out of the cab. Now I know which seats that will fit. Awesome job. Guy Speight

This is a great idea. I just picked up a 1991 4 Runner and am building a parts / mod list. The seats reek of smoke and the springs are shot. I never considered a non-OEM seat replacement, but those ones look great. I also love the idea of replacing the center console.

Yep, been thinking about these TC seats for my 89 4Runner. Like the slide and flip forward on both of them vs just the pass seat as stock.

This is giving me some interior ideas it looks great!

Down here in Arizona those seats and console would have been easily $250. Prices here in AZ are just going insane which makes it hard to do a budget build. Those look awesome in your truck and thank you for giving the year, make and model.

What I love about your channel is you have a project and finish it all the way. Other car channels on here only show pieces or have multiple projects and never complete one. Keep up your dedication and focus!

Love the console. I can't believe that the seats were that clean. Nice work!

You could pull the matching fabric off the tc rear seats and use it to recover the rear fold down seats to match maybe, Ive done something similar.

Thanks soooo much! I planned to swap my 60/40 for buckets. Awesome to know of a no weld, almost direct bolt-in option. The search for some nice examples begins...

nice job my man.. i have a 94 toyota 4 wheel drive with an old bench seat.. you inspired me to get some nice used buckets for my old rig! thanks a bunch.

You have a shop, a Toyota pickup and a ford diesel? Living the dream mate. Keep up the good work. 👍

Looking even better, love the seats

Nice build. Beautiful work on the center console brackets. Been thinking about getting some stiffer buckets for me Taco. Thanks for the info. Gr8 video!

I love the Tc seats. They’re pretty sporty and support just right

I got here by looking to build a flatbed for my truck. 3 hours later I watched a total transformation, great work man for real.

Looking good! Hey, I bought one of those Eastwood mini steel circular saw you told me about. Works like a charm! I was scared of the full size one I have and dropping it on my leg-s. I don't do a lot of car stuff anymore but I restored a JD 430 Diesel garden tractor last winter and just built a 60" box blade with scarifiers. Finished it last night and from a seated position in my wheel chair I could see everything and the saw was light, I wasn't scared of dropping it in my lap because it was easy to hold out to the side. So glad I saw that video and appreciate your lead! My next project is a front end loader for the tractor. That will all be cut with my evolution chop saw except the 3/16 plate for the bucket and that little saw will get it done! Thanks again! You helped me keep going and safer!

Thanks for the idea on the Scion seats, they look great, I had to fab brackets but I'm happy with the results, still haven't found center console yet.

Awesome job amazing how you sourced the console and seats from different vehicles.

That interior is just perfectly done, merry Christmas mate.

Wow man, those fit perfect, lowkey thinking about getting those seats for my tacoma. Interior coming together real nice, good work!!

Great idea for the seats, I've been looking for a set of buckets, for my 89 yota, once again great Job, they look great!

Love the seats and center console. Need to go find some for my truck now. Been worried about getting some that line up that nice. Too bad sr5 seats are so hard to come by, I love the map pockets

Very nice. Awesome how well that center consul fit in there

Great work on the bucket seats and console!! Thank you!

Watching your videos brings back memories. I almost want to go to a junkyard just to wonder around.

Dude, those are the exact same Scion TC seats that I put in my '68 Dodge Dart a few years ago. Great seats, love em.

i know a little late, but the parts you cut off the seat rails you could have drilled holes into the ridge in the floor board. helps to center the seats. but looks good. the seats look great and the center console matches perfect.

Nice work,you made it look easy.Now I have an idea on what to look for as far as buckets.Wish I could just send my truck to ya,lol.

2006 jetta seats fit really good and are nice, low and go far back for tall people. im 6 foot 6 and fit great now lol... also have a great bucket shape to them. i rewound my toyota seat belt winders with the webbing from the same jetta so the vw buckles would work. looks factory and the buckle is attached to the seat, not flopping about lol.... the bracket is fairly simple to make too. the vw seat tracks are flat. the toyota pickup floor has about 1/2 or 3/4 of an inch difference from the inboard to outboard bolts. the bracket levels the seat back out....

Nice job. That truck is looking awesome.

Nice work mate. Coming together nicely

I'm really impressed on the Scion seats, might as well do that. Thanks for the video!

Console and seats turned out great brother...was glad to see you get some Toyota branded (Scion) seats for it 💥

Seat n everything looks awesome! Can't wait to see the next video

Awesome upgrade and I love the center console! Great channel look forward to your uploads!

Scion TC seats are super comfortable. Great score, man!

Очень круто) Мечтаю побывать на таких автомобильных кладбищах . У нас такого нет (

Looks great man seems like the perfect package🤙

Pretty good man! I've got WRX Subaru seats in my pickup, in fact 3 out of 4 bolt holes line up perfectly and you just modify the one mount (front inside)

Amazing what $50.00 will get you at the salvage yard! 👍🏼

I just picked up same seats hopefully they set in as smooth.

Seats and console were made for this truck. Nice retrofit.

Sweet! Crazy how well it all fit! Wish you showed yourself sitting in it! :)

Looks amazing well done!

I have an 05 tc and have wanted better seats for my 98 tacoma. snagged some clean 09 tc seats for $50 at the upull. looks like the inside bracket is perfect and the outside bracket will need holes front and back. thanks for the idea, the tC seats are comfy. can tell they are better than the taco seats just by their weight.

Sweet, looks Great !!!

Curious on the verdict of the 4th bolt, did you need to through bolt or did everything line up after bending the front brackets? Awesome video the truck is looking good!

Scion seats look great! Cup holders where they should be..... Great job!

Build is coming along great.

Just found your channel last night. Watched your bumper builds & love the interior project!

Great job, just found your channel and really loving your videos. Keep up the excellent work.

I pulled same seats out of an 05 Scion xB. Glad they are able to install with ease. still have to get to that end in the project by truck, 83 pickup

That is sweet good job

I am contemplating swapping out my bucket seats for a bench (maybe a 60/40??? if I can find one). Currently, its kind of rough squeezing a 3rd or 4th large adult into the back seats and I thought the bench seat might be a more comfortable solution. What didn't you like about your bench seats? I kind of wish I had seen this sooner... and we could have swapped seats and console. Though, those other seats are probably 5x more comfortable with the lumbar support and other adjustments.

Sweeeet! I have been looking for seats but the price tag on the PRP’s I want have been holding me back. These look pretty good man!

It's coming along nice mate 👍

Outstanding working you're doing. I enjoy watching & learning from all of your videos. I have a question. I have a 1995 Toyota Pickup DX Model with the Extended Cab. And I've found a set of 50/50 Bucket Seat that came off of a 2004 Toyota 4Runner. Will those work with my truck? Thanks

The center console was a good score. Looks like it was made for it.

Thanks for the video bud! Bought my '93 Hilux brand new and is still my DD. That's no surprise considering the reputation of the 22RE am I right?! This project inspired me to do the same. Thanks once again.

looks really good

putting buckets in my 82 Toyota pickup tomorrow. Nice job.

Again…above and beyond. Great vids!!

The seats and the console worked out great, looks factory ☮️

Awesome job 👍👍

That center console fits perfectly in there.

My 85 had geo storm seats 92 ish I think. They worked great. Fit almost perfectly.

I like this design will do it myself

Great reuse of other car parts to make the truck!!! These yotas your doing are my favorite!!

Hi! I want to congratulate you, because you are a Great Genius of transformation and restoration !!! In my quest to restore a 92 4x2 Toyota Hilux Pickup, looking for information I found your channel, which has given me new ideas. and what really surprised me is your ability to manufacture everything that comes to mind, bravo! you are a genious!!! I saw how you made a "Bumper", you look fabulous ... my respects !!! What if I have not seen is the rear bumper, so if you have the plans you could go up to the page and thus be able to buy it. I greet you from Chile, hope you keep uploading Videos for all of us who are your followers. A strong hug in the distance!!!

Just saying you need a million views on this vid. Can't believe that all fit as well as it did great job!

I'm glad I found your video I've been looking for a set of seats for my 99 Tacoma thank you

great job, you are an amazing worker, regard from the words ass, Argentina

Is the "pillar" or ridge across the floor where the mounting points of the seats touch, level left to right? Unlike the tacoma where one side is an inch higher? Installing same seats right now in my truck. Thanks for the vids!

Saludos desde México city!!!!!

Brilliant job

Nice work 👍🏻

Looking good. Are you going to recover the rear seat pads to match the front?

Dude your the man

Wished we had a pull n save junk yard here in Alaska

Hey, any Running Boards recommendation for this truck? Still original !?

Looking good!

Awesome!

I’m getting so inspired to have some fun with my 1998 4runner

I put some 2004 Subaru Impreza seats in mine looks mint

I love the new seats they look really comfy also the center consul especially since the center consul will give the passengers if you ever have passengers in the back cupholders since the stock one doesn’t have cupholders in the back which I don’t believe it does but then again I only have a single cab first Tacoma . Have you ever thought of instead of making brackets in such for the new seats could you just take the ones off of the stock Toyota seats and just put them on the new seats unless that’s too much of a hassle to do and not really worth it

Awesome informational video! I found those exact seats online at a salvage yard; what size socket did you need to remove them?

I just went to junk yard after watching this. Found an Xterra center consol and the Scion tC seats. It looks and feel so much better

Great channel, great work. Videos are coming frequently. Nice

Seat look good👍🇲🇦

Bought some 07 tc seats for 03 extra cab and the mounts are an inch apart in width and length. Can’t decided if I wanna drill all new holes

Definitely going to look into doing this in my truck i also don't like the 60/40 seats

Great video!

I would have sent the seat on the back set of holes and made a little l-bracket to bolt in the position of the front mount with a welded bolt sticking vertical and bend the bracket up in flat and bolt it down and then you're able to game a couple inches backwards for legroom by using the Back original holes

This is exactly what I was looking for and couldn’t find for months because I hate the old interior on the 96

Nice bro 💥👏🏻

Great video mate, nothing like a bargain from the junk yard!

Your patience and attention to detail is incredible. Everyone is in such a rush that they half ass the work but not you. Maybe you have Japanese ancestry.

Gotta tell you, I was going in my dads shop and there is a 88 auto rear end and a solid axle from the year that was most gusseted. They need a home. The front axle has no 3rd member. To bad you are not closer I would give them to you.

so the rear bolt holes on the Tc seats didn't need any modification? Did they line up perfectly?

NICE!