Way to jump in with both feet. Nice table. If I could make a suggestion...the edge of your welding table invariably gets used to bend, hammer and form the metal pieces you're fabricating, so it has to be very strong at the edge. You might want to flip it over and add another piece of square stock perfectly even with the edge, then add two straight pieces connecting it to the legs (flat) and finally reinforcing with 45 degree supports from the edge to the legs as well. This way you wont bend or curl the edge of your table when you're beating the shit out of a piece of metal.

welcome to the brotherhood of welding. You did great for the first project. Wear you safety glasses. Will use this for my welding class.

Classic music and welding definitely matches to each other. Nice project

This is one of the best videos for a beginner by a beginner! I really liked your honesty and fearlessness, not going to lie, you really scared me with the angle grinder. Awesome!

Cool table, I've also just purchased my first welder, I got the LE 140 too. I think I might add a shelf at the bottom of mine to stiffen things up that much more plus provide a spot for my welder as I don't have a cart yet. Love how you didn't let a few troublesome welds at the beginning stop you. You just kept going and focused on the progress and improvements you made, then went back and fixed the first ones. You've an inspired another beginner to start their first big project!

What an excellent project. The condition of your workspace speaks volumes about your meticulous attention to detail. Of course...nice project car you have, as well! I actually learned to weld so I could work on restoration of my barn-find ‘65 Fastback Mustang. I think I will use your plans for a welding table too.

I've been given a mig and did my first ever weld yesterday, I love your honesty and have a go attitude. My first project will be your table. Subscribed 😎

Really got inspired by this; definitely going to try this myself as I got a mig welder from a friend. Ps Nice to hear classic music for a change 🙂. Thanks!

Very good video, enjoyed the process. I'm amazed how many people are picking up welding. I also appreciated your segment on buying the metal.

Fantastic breakdown of design, buy, and build! Thank you.

This was a fantastic introduction. I appreciate how organized and easy to follow your presentation was. I gave me - a noob - tons of insight into each stage of the process (particularly your experience buying the metal). Thanks and great job!

Good job dude! This video popped up at the perfect moment as I'm in the throes of adding more table space to my micro workshop, and the intention for the add is for welding, among other things. Thanks for going through the trouble giving us viewers an easy way out of figuring out the amount of each component of the build. Again nice work :)

Well done! Both informative and entertaining. This will be my first project for the new welder I just bought. Thanks for doing this video!

Fantastic! This gives me hope that maybe I can tackle a project like this. Well done!

Thanks man - I'm about ready to give this a try. Already installed my 50 AMP service to garage, bought a mig welder and 75/25 tank, acquired an evolution 15" saw and some steel! TABLE TIME!

Well done! Lovely choice of music too, thanks!

Very nice video, table and welder! Love the simple directions and music . . . good job Sir!

Damn. Thank you! Love the segments and flow of your vid. And the classical music is a nice non distracting touch.

Bloody nice work, with a bit of confidence and the right tools people can do or create anything, keep up the good work! 👍🏽

I love the simplicity of your design. It looks very clean and functional.

I love how you always envision what you want, then go and do it, even if you have never done it before. Not everyone wants to tackle welding, let alone restore their own car. Its awesome what you're doing. Very inspiring and motivating, even when things go wrong, forcing you to seek a better solution. I always look forward to this build and your videos. I can't wait to get back to NC and work on my own Z again. Keep safe and away from the damn virus. God Bless

Cool project. Thanks for letting us watch.

What a great video. I have had my eye on a truck that has a Flintstones floor pan and have been considering going down the path to learn welding so that won't be a deterrent in the future.

Really cool to see someone local (I’m near the Raleigh area) getting started! I’m about to build my first table to hold my forge.

Well done in both explanation and execution. Im giving that a go. Many thanks

Just found your channel while looking in to making a welding table. I think you did a great job on the video and table and I think I will try and build a similar one to use for my projects. 👍

Awesome. That was GREAT. Thoroughly enjoyed all of it, and leaned much. 👍🏻😊

I used Dillion Supply often when I worked in Raleigh. Always great service.

Great video. That was a good idea for a learning project and something you will need. That is a nice table

Great video. Made my day. I’m a beginner, ur video gave me confidence. Thank you

Your mindset and style seem nearly identical to mine my man. Great build. I just got a steal on the supplies for my table today from the semi-local shop. Picked up a sheet of 49inx29in 3/8 plate along with approx 30ft of 2in square tube FOR 50 BUCKS! I was lucky enough to find what I needed in their cutoff bins.

Thank you for this. I will use this as my first project as well 😎

Very first thing I saw was the Z dash on the shelves! Great video!

Cool video. Im always excited to see your progress. A few pointers. Control your heat. Bounce around. Always tack in a place that can easily be removed if you mess up. Be comfortable. You can also do a series of tacks if the piece gets too hot. Off and on with the trigger, to control the heat. Good fit up goes a long way. Its amazing how you wont blow holes if your fit up is good. Flat welds are always recommended, specially if your new. Overheads are a bitch only cause of the sparks raining down.

wow ..just wow ..just the video i needed before my 1st project! good job

Wow that's awesome explanation. Precise that i easily understood.. thanks for the instructions.

Good to see you switched from a short sleeve shirt to a long sleeve shirt - that will help protect from UV exposure and melanoma down the road

Great job for a beginner, I enjoyed the video. Thanks!

You did great man!!!! Gotta say welcome to welding. Its awesome.

Great job! On first project! Keep up the good work! 🤙🏻

That was awesome dude, and great sense of humour

Loved this video. Well done and I hope to build my own soon.

Thanks for breaking down the details. I really appreciate it.

Great video, thanks for taking the time to make this

I turn 66 today and have yet to throw my first bead, but I will be getting into that before fall. I'm sure my first welds will look a lot worse. Nice job young man!

Welcome to welding!! Tip: have your garage door open just a little bit or wear a respirator.

I'm a newb as well. Gonna do something like this as my first project. You might consider putting links for all the tools you're using; might help pay for your channel!

Great video, wonderful story telling. Fun

very nice job and just the right size for home use or a garage. I think i will build one as I just bought a Hobart 140 welder but the shelf tubing will be half the size as it dose not that much strength, again very nice job and the video was well detailed.

Glad to see you are getting better. For your settings you can download the Miller app. I welded very little before for I decided to take a welding class. I wanted to learn the proper technique as to not get too many bad habits. I took my classes at a vo tech school at night for 40 hours 2 nights a week. Cost was $400. I liked it so much I decided to take the intermediate class.

Great table man im also gonna soon start welding

Thanks for this! Glad you weren’t ashamed to show your mistakes! Some don’t realize in order to learn and grown mistakes have yo be made. Now I’m gonna go and make my ton of mistakes on my beginner table.😂

Sorry to hear you had a bad experience at the metal store. I've been very fortunate when it came to dealing with welding suppliers. My very close friend of mine owns a very large welding business in our state. He has six different locations and service trucks that run into other states. Whenever that he needed to pick up supplies when one of his shops would run out I would go with him to the different suppliers. When I started welding myself my friend was more than happy to go with me to the store. By that time a lot of the places knew who I was since my friend is one of their big customers. So I was fortunate enough not to have to deal with ignorant people. I'm glad you left there in front of yourself a better place. I really like how your table came out. I really like the height. I'm pretty tall and most store-bought welding benches are a little short. When you were finishing up I was thinking to myself that you should cut out her grind out those first welds and redo them. When I saw you doing it I couldn't help but to laugh that you had the same idea that I did. I look forward to seeing other videos I definitely made sure to hit the like and subscribe. I don't mind supporting others.

Great job looks very good

Lol nice video, I literally just picked up welding, definitely going to do something like this.

Wow, first video I've seen by a beginner welder for beginners like me! I bet you didn't know how to walk before you learned how, either, and it looks like you do pretty well at that. Keep on learning always and remember , thank God for grinders(I have four), flap discs, etc. Don't be afraid to make mistakes, keep going, you can't get anywhere following a parked car.

I love that Evolution chop saw I hope to one day be able to afford one.

Excellent, informative, entertaining video. Good job!

Dude I love this! Great job

well done mate, from shit welds to nice welds in your first project, that's awesome. You've inspired me to make my own welding table, thanks for sharing.

Good job! Kudos on just going for it. I bought a brand new Lincoln welder just like yours 2 months ago that I haven't even taken out of the box! I didn't realize I've been too anxious about getting started so I've been procrastinating; you just gave me the motivation. One newbie observation though, being that I'm obsessed with safety while working... at 15:50 you are just blasting your bare ankle with glowing shavings! Did you notice? Maybe work boots would be safer 😉

Awesome garage bro

Great video man. Good work.

Loved your choice of music!

I actually came up with the idea to build a weld table for my first project myself. but yeah it really is a great idea. main thing is you don't want to catch your wooden table on fire lol. and what you built is kind of like in my mind what i want to do. I will make a vid on it too lol but it will be my own design.

I'm just starting too. I had two 280ZX's a long time ago. Great choice. Great video. (I thought you had to listen to heavy metal to weld.)

A good effort, well done.

Enjoyed the welding project. I'm about to make a welding table and am going to use your blueprint diagram if that's alright. I never welded in my life and this is going to be my first project. I too am in NC and don't need or like rude vendors. Heck, you're giving them your business and money. If anything, you'd think they'd be all over that. Enjoyed the video; full-watch. Gave a big thumbs-up. 👍🏽🙂

Great Video! Well done!

Mate, good job there. Safety first especialy when working alone. I know that wearing PPE could be annoying, but after time you will get use to it and it might safe your eyes one day and your hearing as well. Keep on grinding ;)

Enjoyed the video. Great voice.

Pretty much loved everything about this except no safety glasses and other safety stuff. Although I must admit i tend to be bad and not do things the safe way. Might be one of my first beginner projects.

LOL at 19 mins, love it that you left that in..

For first time flux core welding I think you did fine. I noticed you went from thin gloves and short sleeves to long sleeves and long heavy gloves on the first day. Good move. This is as much table as I need. I may build one. Thanks.

This was awesome!

Well Done!!!!

Great stuff. Cheers.

I'm oly 7min into this video and I like the table, I would make mine about 40in.x 28in. I have a pretty small space!

Wow, br8 job in diy welding table. Gr8 job in making blueprints, which is important. Most plans starts in a coffee shop & on a pc of napkin. Next time U weld, turn a fan 2 circulate fresh air. R U considered drilling 5/8 hole 4 welding clamps. Thx 4 sharing on Utube.

Thank I will do mine !!

Very nice,. Thanks

Only because your a Milwaukee fan I decided to like your video

Thanks for the tip regarding Metal Supermarkets vs. Dillon Supply. I'm in the Raleigh area and am looking to do my first project as well. I'd found Metal Supermarkets, but not Dillon and I'd rather drive a bit further to support a business with a decent newbie customer experience.

Nice job. I've not found a need for a welding table so far (did tons of welding on my '73 Lancia, '72 VW and'69 Mercedes, and my son's '72 240Z)

Great video! Nice shop setup too! Quick question; I love the look of the raw metal table. Will it rust like that or how did you prevent that from happening? Looks awesome

Very nice project, your welding is progressing nicely, nothing like practice. If I might add a suggestion; I would cut those legs off about 12" and put your wheels onto square tubing that will slide over the legs. You can then drill holes every few inches and use a pin to adjust the height of the table for your needs. The height you have the table now is fine and a good idea for comfort and accessibility but when you have a larger project you will find yourself putting it on the floor or you will need a stool, etc. Trust me, this welding, metal fabbing gets out of hand quickly and you will find yourself making more and more. Just a suggestion, again, job well done.

Nice job

Awesome job, mate! And, btw, your first welds look better than some welds on earlier Tesla production vehicles. So, u did better, than a multi billion dollar company. I call it success.

Great video, but you missed the main reason (imo)in the first section for making your own table, that is the total satisfaction of diy projects, when you stand back and say I did that, yeeaahh. Don't buy, when you can diy. Happy welding. ps I love that you showed the mistakes too, when welding 'new to you' metal get a small piece of that 'new metal' that is leftover or scrap and dial in your settings, it's easier to start low and turn it up than start high and blow holes in your work, been there done that lol.

Flux core is really hot. I am welding my car right now and it takes patience. Good luck on yours.

btw...well done on the table!!!

glad that you did this. i watched a bit of the first datsun rebuild video and you mentioned being scared about getting started. that's so normal, isn't it? but so rewarding...not so much through creating something perfect, but rather through persevering through the doubts you have. inspiring and encouraging! by the way, what kind of chop saw and blade are you using?

Good stuff

Great design , my one suggestion would to make the top to be able to screw on . That way you can take it off to make it lighter to move , if you have to take it to another site :) Impressive design though !

The welds were pretty bad but the table turned out nice. You got heart for taking on something so difficult with no training.

Really nice table bro. May I segest that in a future build of a table you could design a holder or cage for the actual welder itself as it will then be much less of a hassle to move around. Still loved the build.

Great job kid, I subbed

Just saw this video, Nice beginner table! Sorry to hear your experience was "not that good" at Raleigh Metal supermarket. I have to say, the way you said they treated you in the metal supermarket is the exact reason why I would not return to Dillion Supplies for metal or for their great tool choices. I went there going further out of my way not knowing a bunch about metals either, but I was glad that they at Dillion were so rude to me because it forced me to go to the place I love dealing with now. Raleigh Metal Supermarket in Durham. I can get and pay for only the amount of materials I need, all cut perfectly to my specs while I wait or not if ordered in advance, all while being treated very respectful and very nice by everyone there.... I would say give them another chance as they don't charge you for materials you don't need and didn't get.

Just got to the car in the background. Im doing it lol. I figured a way to get bottom of the tire about 16" off ground. Im gonna spend a LOT of time under there with a welder

Cool vid. Seem intelligent. Bit to learn. Quite entertaining. Thanks.