i agree

Agreed Those strikers are amazing

some people might use it stock for a couple of weeks depending on were they live, like in brazil the striker is avaible in a couple of locations for cheap but most of the uprgrades parts are sent from china so 2-4 weeks delivery, that also happen with the VSR and L96, but you are correct still , 99% will not use the gun stock

+Marcos 340 - That's rather short-sighted.

Think it in this way - we upgrade the gun because they suck in reliability. Conversely, if the gun itself is good, then there is no meaning (or at least no immediate need) to upgrade the parts as well. Which means you will spend less money into upgrading. Not to mention parts are made under requirement. If the guns are popular then parts will be made for them - make the girls bend for you not bend down for them. VSR was born with (comparatively) exceptional performance and pricing when there were no reliable and cheap rifles, and it was still not serviceable at high power play stock, and AS-01 is filling that niche with steel sears.

Ya once you've dumped $1k into the fricken thing.

Given they had a $300 budget limit, I'd have liked to have seen them use the remaining money ($150 Striker, $120 VSR10, $25 L96) and upgrade/tune the guns as best they could. Then given us tests that actually matter for a sniper. Weight, noise, bolt draw weight, and performance/accuracy testing with a variety of weights of ammo. And yes, actually keeping the bench rest steady and still for the accuracy test.

You should watit till next episode when they try underwater GBB shooting with Michael Phelps

gay

Gae

@@laowu8024 Ты расист! Ты расист! Ты расист!

@@bhante1345 Ты расист?! Ты расист?! Ты расист?!

assura11 Yes please

I’ll answer, Tm hi CAPA, best upgradability. FNX for out of the box

but no one plays them stock they are all unplayeble and upgradet the alle coud have the same joule the vsr just have better aftermarket hopups and can hop hevyer bbs on distance

Range will be based on muzzle velocity. Faster, the further it can reach.

How about some Videos on this particular Upgrade anyone ? .....i like the Rifle, but would Love the Rifle if there were a Solution to the Air Volume issue.

2 ways: 1. Buy a bespoke which gives you an enlarged piston. 2. Use a shorter barrel to compensate for the lack of volume. Or hope Amoeba releases an AS03 which comes with a VSR sized cylinder.

In my honest opinion, can a gun be really considered "good" if you have to slap on many other 3rd party parts which could end up having a cost 2-3x the original price of the rifle you based on? While the system itself is good, the performance of the gun ended up having not much to do with its original build quality. Looking at your list (as well as mine), there is practically nothing left in both your and my VSR-10. The trigger is removed, the piston is replaced, the barrel group is replaced, it basically is a gun built upon an another gun. IMO that is an end result of throwing many quality parts together rather than the gun being really good. At least the Striker comes with a 90 degree sear and a pretty amazing build.

Krytac LVOA ftw!

Why? Those are like three different classes....

Jerret Green ??? This are AEG’s... classes lol

Yeah I never mind it, if I had a choice I go with the Scorpion.

assura11 so, a Long gun vs long gun vs pistol caliber carbine? Makes sense

SIR1U5 how? It's 180.

they are shit tbh. Not fully upgradable, while a mb01(90bucks btw) is the second best platform after the vsr10.

Let's be honest, what are we really buying for the VSR anyway? Chamber wise, the only chamber we use for the VSR is really the AA red chamber and the Striker has their AA blue chamber. (and add in the fact that the Striker's hop up, provided it's normal, does not leak nor curve while the VSR does with high powered springs) Cylinder wise, there are multiple steel cylinders (Maple Leaf, AA, PDI) for the VSR and it uses specific springs where their are plenty, but the Striker also has its own steel cylinders (AA, Ares, Edgi) as well as uses AEG springs (which is practically the most plentiful part type in airsoft). Both doesn't handle very powerful springs. Barrel group wise, they share buckings and barrels. Upgrade potential is identical in this aspect. Handle and external wise, VSR has support from Maple Leaf, AA and PDI, while AA has support from Edgi, (also) AA and Ares themselves. Trigger group wise, VSR has plenty while Ares is mostly reliant on Edgi, but Ares have steel sears and the Zero resistance spring guide from ML (which removes the need of a Zero trigger for reduced push/pull resistance). Striker stock is much stronger and feels tougher than the VSR. And up to stock performance, VSR-10 cannot handle heavy springs while Striker does that on the brim. VSR-10 uses pot metal for sears while Striker uses steel. VSR-10 curves at long distance and under high power while the Striker doesn't. Striker has bad QC while Marui's QC is unparalleled. All in all, VSR has upgrades but so did the AS-01. At this current age there is nothing the Striker loses out in upgrades, and a gun that is heavily reliant on upgrades might as well be considered a failure.

Haha, yes a bipod would be better...

Because the SSG24 is an upgraded VSR 10 out of the box, so it would be extremely unfair.

If it's like that out of the box i mean

All of them are OOTB, and if you upgrade them there's no meaning in comparing at all

Try putting a short outer and inner barrel on it.

+Koala Tactical yes, it requires more money, but not really more work. BUT you also have it much easier to reach high energy, because you can just throw in a stronger spring, which you wouldn't be able to pull in a VSR or L96, because of the long pull in those 2 guns. And you don't need to make the volume bigger (since that would destroy the point of buying the striker), it works without that too.

You can have a striker + scope + EdGi dual bore barrel + EdGi cylinder kit + 2 extra mags for it + Action Army Hop unit + Action Army hop adjustment screw + PDI W hold hop rubber for about £800, which is pretty good considering that's a new gun, plus a full EdGi kit, and a decent optic. Though yes, the low cylinder volume is a concern for some, it's actually not a huge issue in the experience of most Striker users. The main issue with it is that the hop chamber is associated with poor QC, so the upgrade to the Action Army hop chamber is a must.

My striker was shooting 2.38j with .36s today. Idk how much a person really needs.

having a high cylinder volume isnt just about pushing out the high joules there are other reasons to do it for instance if you want to get the best performance out of heavy bbs (which will usually travel further than a lighter bb and more accurately) it requires a higher cylinder to barrel volume ratio... well if you have a smaller cylinder to start with that limits you to making an even shorter barrel and that can affect performance in its own right since the different weight bbs require a different barrel length to accelerate to full speed.... cutting it all short having a lower cylinder volume limits your performance with heavier bbs.

nah

Not on airsoft. You might want an airgun for that kind of accuracy.

Exactly what I thought

out of production unfortunately

Shit