Budget Spray Gun Shoot Out

Рет қаралды 54,825

3 жыл бұрын

This video is a budget spray gun review. I chose 3 budget spray guns to put head to head.
Merch Link:
www.spraygunsdirect.co.uk/ind...
For loads of Paint & Panel articles and Gunman Merchandise, see my website through this link thegunman.net.au/
To keep up to date with all my latest work Subscribe to my Channel
If you would like to see some unedited raw footage of my work then visit my other channel The Gunman RAW / @thegunmanraw
Here's a link to another channel called Gunman's World where I post lifestyle videos.
/ @gunmansworld4314
Social Media Links.
Parler isn't anywhere near as bad as the Lamestream Media would have you think, let's create a positive Spray Painting community there. parler.com/profile/TheGunmanG...
I was banned from FaceBook for no reason so I recommend following me on BitChute through this link.
www.bitchute.com/accounts/ref...
Instagram
/ the__gunman
Twitter
/ gunmanthe
COLAD BLADE LINK:
After having a lot of questions about the blade I use while masking a car I decided it easier to include a link to the product here.
www.spraygunsdirect.co.uk/ind...
Health & Safety Notice:
All of my videos are made in good faith for
entertainment & to help people learn my methods.
Many of the materials I use in my videos are
highly toxic & can be harmful to the human body.
If you are unsure of the health risks of any products
please refer to the MSDS (Material Safety Data Sheet)
or TDS (Technical Data Sheet) all products have one,
available online these days but your supplier should print
on request, follow outlined precautions or you may be putting
your health at risk. After watching this video
"Get out there and Paint Some SH!T"
Music from NCS
Follow NCS
Spotify → bit.ly/SpotifyNCS
Twitter → / ncsounds
Google+ → google.com/+nocopyrightsounds
Facebook → / nocopyrightsounds
Soundcloud → / nocopyrightsounds

Пікірлер: 138

@detailedautodiagnostics 3 жыл бұрын

Being an enthusiast and not a professional in the paint world, I absolutely love the more economical equipment videos… the pros may not agree but I like the videos that show a professional result with an affordable tool!

@ysr789 Жыл бұрын

I got 50 litre compressor, has 14cfm. Should I use slg5(9.8 cfm) or f160(7.7cfm) because video says flg5 is more suitable for home use even though has high cfm requirements

@bosshawg7427 11 ай бұрын

@ysr789 the cfm rating on the ANI guns is misleading. They rate them at lower PSI, but they don't atomize all until you crank the pressure up. The FLG5 keeps composure from 18-29, but can handle up to 35 without blowing out the fan pattern. It's also pretty efficient on paint use. The ANI isn't

@Luckydan996sps Жыл бұрын

Bought an FLG5 in the U.K. on the strength of this video. I’m a hobbyist but like to make a decent job. Did a base and clear red side skirt this morning to try it, really even spray pattern and the clear went on like glass 👌

@stephenbello1081 3 жыл бұрын

I did a home crash repair and spray job and am happy with the result. Thanks Gunny for the time you put into the channel, without it, I probably wouldn't have tried. The one lesson I hadn't learnt was how far to pull down and clean my gun (Ani150). I was taking the pot, Air cap, needle, spring and knob out to clean separately and then reassemble, flush and test spray gun cleaner. But I didn't realise that the air nozzle itself needs to be spanner'd out to clean the chamber behind it as well. The supplied instructions were an exploded diagram and parts list and most utube's show just the "hand screw out" items being cleaned. Its a detail that might have been obvious to everyone else, but I missed it.

@BearBudgetTurbine Жыл бұрын

I have gone from diy on my own cars to "semi-pro/minor league" taking on projects for others. I love making something old look nice again. In addition to books and just getting out and painting stuff, I watch hours of paint video in the evening when i'm done working. So thanks for all the videos and motivation

@kingvtec100 3 жыл бұрын

Another great video 👍 i have all 3 of them, flg5 1.8 for primer work, AZ3 1.3 for basic base jobs and ANI R160q 1.0 for small stuff all good guns for the price but cant beat the higher end guns

@302sobriety6 3 жыл бұрын

Thank you for all your videos. Great information. Thank you from Texas

@the_fomoco_man5160 3 жыл бұрын

Thanks Gunny, glad to see the FLG5 you turned me on to still ranks high on your list.

@canadianpainter8344 3 жыл бұрын

Nice to see your video again. Thanks Gunny. Vinesh from Edmonton, Alberta, Canada

@akira5982 3 жыл бұрын

Also have a FLG5 recommended by gunny, more than good enough for my skill, painted my 180sx & came out pretty sick could not be happier with my purchase 🙂👍

@johnclark1925 Жыл бұрын

This helped as these were the guns I was considering for home. Thanks! 😎👍

@AndrewBitza 3 жыл бұрын

I have sprayed my car in acrylic with my FLG5, no problems, agree it's a great DUI gun.

@brianowens2073 3 жыл бұрын

Another great video giving people budget guns that are really good for the money plus i love watching your videos

@timklein4884 3 жыл бұрын

Awesome video gunny, its great to hear the different views and benefits of each gun for different purposes, and doing entry level guns is awesome, this is probably the sweet spot for your viewers watching, can we have a mid range gun test soon, good, better best, would be awesome, thanks again from rAdelaide :-)

@slash100588 3 жыл бұрын

Another video idea: show us how a good clear sprays vs a cheap one and show us how they each spray through say a budget gun vs a pro gun. redo video idea for primer, base, sealer. It would be cool to know what you look for in a quality product. Also straight up safety tips episode or series. Honestly with all the chemicals that come with this job/hobby I’m sure you’ve came up with some genius ideas on keeping yourself safe that would benefit us newbooties. Keep up the good work

@slash100588 3 жыл бұрын

I’ve been trying to compare these for a couple days. I’m super glad you did this. Thanx from Los Angeles CA. USA. We should make a Gunman Krew btw🤘😎 spray guns and heavy metal 🎸 hah

@guyedwards1507 3 жыл бұрын

Great video as always gunny.

@marinmarinov6922 2 жыл бұрын

Top man helped me out today of making quite a few decisions without spending hours reading

@JohnWD40TC02 3 жыл бұрын

Good review Gunny, I got both my FLG5 guns a year or so back after watching your vids on them and have to say they lay down primer, WOW and base just fine, these days they are just used for primer and WOW (sealer) as my GTI Pro is my base gun, after using the DV1S I've got myself a DV1 C1 clear gun which arrived today so looking forward to tying this out 😎👍 John UK.

@jagmanpannu7072 3 жыл бұрын

Hey gunny, I watched your all videos, you doing very good job. I just want to ask you that, what psi should be set for basecoat solid paint (paint+hardner) where no clear need ? What distance should be from panel to gun ? How many turns of fuid ? Specially for devilbiss gti pro ? I would be very thankful if you would reply Thanks

@m1sterj237 3 жыл бұрын

20 year vet painter Nothing but sata for me. Iwata are water guns. Would make good trim out or primer guns

@Imfastergarage 3 жыл бұрын

Thanks gunny

@pandacoupe 3 жыл бұрын

Love your videos mate…I live in Perth and would love to know we’re you work. As I am currently looking for a respray of my s13 and love your work??

@graeme6054 3 жыл бұрын

I’d be interested to know your opinion on the Star S106 1.4mm. These guns are available from most of the big tool shops in Australia (Total tools, Sydney tools etc) for $190, being so readily available it’s more likely the type of gun a beginner/hobbiest would pick up.

@wlodown 3 жыл бұрын

Went ahead and ordered a FLG 5. Arrived today.

@mitchellferre1652 3 жыл бұрын

I like the Flg5. I love the Bellaria. They will have to pry the GPI from my cold dead hands ! 😁👍

@1..883 2 жыл бұрын

recommend Iwata's raven will be there Yes, spray lacquer, small work, KATANA-13C A3z W101 Which one is the most suitable

@watchthisspacecarchannel6523 3 жыл бұрын

Great comparison video I think you summed them up very objectively. I’ve been contemplating buying the ANI F160 in a 1.9 to replace my AZ3 as a primer gun, I’m just really disappointed in the AZ 3 which sucks because I do generally like Iwata’s

@aurktman1106 3 жыл бұрын

I have a F160 and love it! I haven’t used it a ton, but it’s been great every time I use it.

@watchthisspacecarchannel6523 3 жыл бұрын

I've seen it used in a few videos and I think it's strong point is good atomization, I think I'll be getting one as soon as I'm able to

@6xcchamber971 2 жыл бұрын

Hello from Canada! I own the FLG5 gun and need to change out the Seals in it. I do have a kit to fix it. Would you be willing to do a Seal replacement Video???? It would be greatly appreciated.

@josephrebholtz6388 3 жыл бұрын

Just ordered FLG 5. Thanks for all your hard work and great information.

@todornakov 3 жыл бұрын

Great gun, I love it.

@jones_1996 3 жыл бұрын

Does it only have the 1,4mm nozzle?

@todornakov 3 жыл бұрын

@@jones_1996 there is 1,3 and 1,8 also.

@SLYDIT 3 жыл бұрын

m.facebook.com/story.php?story_fbid=479528773414950&id=105117464189418

@todornakov 3 жыл бұрын

@@SLYDIT great job!

@kentyarng409 3 жыл бұрын

hey gunman a part of the video you said cheap callenger clear coat, i been spraying axalta challenger clear, what is your perspective on the clear? i realize the clear like to die back and shrink a lot have you had similar issue? gloss is okay but seem to shrink more than others

@kr2513 3 жыл бұрын

I bought the ani r150 based on your reviews and I loved it. After 2.5 years It needed a rebuild as the tiny white o ring behind the nozzle keeps moving. If ani simply offered support [maybe videos on how to do this] they could make a viable product even with their current quality.

@jaykrom852 3 жыл бұрын

Look at the Spray guns direct website. They probably sell the seals in a 5 pack for cheap. Parts are listed in the section with the gun you look up. And I've seen Gunny show this seal in one of his videos,too.

@juansalinas3963 6 ай бұрын

Hola amigo consulta cual de estas 3 pistolas recomiendas para usar imprimacion 2k en un automovil ?

@martinwaples7330 3 жыл бұрын

Hey Gunny, MAN, YES I BOUGHT THAT ANI 170 SILVER AND LOVE It. I AM CONFUSED THOUGH ON SPEAY GUNS DIRECT WHICH 3M PPS ADAPTOR TO GET PLEASE ADVISE..forgive the caps just excited bro...next is the FLG5, THE PANELS I usually spray are motorcycle fairings that I build, mostly fiber glass requires painting or primer/ CARBON FIBER, USUALLY CLEAR ONLY AND MAYBE SOME GRAPHICS.. YOU REPLY WOULD BE AWESOME BRO.....THANKS A MILLION, I LOVE ANYTHING YOU DO... AS A MATTER OF FACT YOUR CHANNEL TAUGHT ME HOW TO SHOOT.....WISH I COULD SHOW YA SOME SOME OF THE WORK...!!

@shinigami1265 3 жыл бұрын

Devilbiss Gravity Spray Gun, 0.059In/1.5mm - FLG-CNG-115 vs Iwa-9276? This are my choices at the moment because I can't ship here the flg-5. I just need the gun for my welding projects(doors, furniture, gates, etc) business signs, and a few car parts

@frontlinecustom 3 жыл бұрын

Cheers Gunny, excellent finish on the last part, if my job comes out half as good I'll be stoked....👍

@TheGunmanChannel 3 жыл бұрын

Do me proud mate!! That gun is going back to WA 🤣

@frontlinecustom 3 жыл бұрын

@@TheGunmanChannel I've got another HQ wagon to do and a mustang waiting after my van, it'll be well used..👍

@hasnainejaz2611 3 жыл бұрын

tell me whts the paint brand and clear coat you are using.looks shinny

@madbazRC Жыл бұрын

Which gun would u recommend for a home garage with the odd use?

@nenadstanojevic1427 3 жыл бұрын

What is the paint thickness guage you use to measure paint thickness?

@aurktman1106 3 жыл бұрын

I have the F160, R150, and FLG5 all on your recommendation and I must say I’m absolutely satisfied!

@sean7193 2 жыл бұрын

I just got the f160, but now sounds like the flg5 is also good to have...which one do you prefer? should I just stick with the f160? thanks :)

@aurktman1106 2 жыл бұрын

@@sean7193 what are you spraying? Base, clear, or single stage? I’ve used both for all 3 and for me, the F160 works fine for single stage and base, the FLG5 works fine for clear and base. The F160 seems to need a bit more pressure than the FLG5, but I’ve heard it both ways. The ANI guns are also a bit easier for me to clean, but I’m just strange in how I clean my guns.

@sean7193 2 жыл бұрын

@@aurktman1106 thanks for getting back. I plan on spraying base and clear with it (got the 1.3) . From what I hear you can reduce the material, and narrow the fan slightly if you want to reduce the pressure required by the f160. I'm.sure with a little playing around I'll get it to work for my scenario....also do you k ow of you can spary epoxy sealer with it or should I get a dedicated primer gun for that? Like a 1.8?

@aurktman1106 2 жыл бұрын

@@sean7193 depends on the epoxy primer. The epoxy I use needs the smaller tip. I use the 1.3 or I use the big pot on my ANI R150 to spray epoxy. It has the 1.0 tip.

@sean7193 2 жыл бұрын

@@aurktman1106 gotcha. I was told to maybe use a different cheaper spray gun as the epoxy is hard on the tip.

@stonecold2433 3 жыл бұрын

flg is underrated gun..i'm gonna buy it..

@sergioferreyra3095 Жыл бұрын

what do you think of europro HE or Anest Iwata Kiwami 4

@dodgecummin24v 2 жыл бұрын

What is your thoughts on the new iwata wider 4?

@PnwOnTour 3 жыл бұрын

I have the gunsa 2.0 and flg5 1.4, diy occasional use, reliable, flg5 can be dialed down to paint small pieces and I’ve ran nearly everything through it. BOND out 🕵🏻‍♂️🍸0️⃣0️⃣7️⃣

@EChunter Жыл бұрын

What clears do you consider high end ?

@EChunter 2 жыл бұрын

Bought an f160 on your recommendation.

@freddylaurens6098 2 жыл бұрын

I picked up an airgunza 1.8 for primer and was terribly dissatisfied with the fan and overall performance

@slash100588 3 жыл бұрын

Hey gunny here’s a video idea LPH400 vs supernova. Lph400 always made think it was the working mans supernova and the supernova was like a pimped out rockstar version of the lph400 but I only have an lph400 so I’ve never been able to compare them. Anyways I would love to see your professional opinion. Spray on bro

@ronaldpeterson1538 3 жыл бұрын

You will never find a better gun than the LPH 400... Period!

@brainwashingdetergent4128 2 жыл бұрын

@@ronaldpeterson1538 until you spray a new wet on wet base system you will never find a better gun.. there i fixed it for you.

@brainwashingdetergent4128 2 жыл бұрын

Oh and to the original comment i had both lph400 and supernova the lph400 is way better i traded my supernova in on another lph400 in just a few weeks.

@Mechaniclyfe 3 жыл бұрын

Good shootout gunny 👍🏻

@asksteevies4941 2 жыл бұрын

Nice

@ANIMATORHAPPY 2 жыл бұрын

Что лучше купить,flg5 или pro lait t110?

@maxs6775 3 жыл бұрын

Just bought the flg5 few weeks ago ..cheap spray gun for £100

@r1crazy100 3 жыл бұрын

His Back 🏆

@legyngerii265 2 жыл бұрын

FLG5 1.3..shoplink sir..share..tx..

@joselinosilva1974 3 жыл бұрын

Ola Atirador! Essa arma FLG DeVilbiss FLG5 FLG-G5 preferencialmente bico 1.4 não vende aqui no Brasil, como faria para adquirir uma arma dessa aí? Vc tem loja para venda? Sou seguidor do seu canal a muito tempo e admiro demais seu trabalho perfeito e muito obrigado pelas dicas de sempre....

@royosborn7869 3 жыл бұрын

Thank you for this budget spray gun shoot out - that helps me make a decision.

@jesusalbertogomezgaragorri118 3 жыл бұрын

Good evening friend, your videos are very good, I want to ask you a question, I am about to buy one of these two pistols, Devilbiss FLG5, or Anest Iwata AZ3HT2, both 1.8, I will use it for white primer,

@TheGunmanChannel 3 жыл бұрын

FLG5 would be the better gun.

@tonydanelli7140 2 жыл бұрын

Secondo me il miglior ventaglio è quello Ani concordi?

@oscarontiveros5117 3 жыл бұрын

I'll take my prolite any day of the week

@reverseuniverse2559 3 жыл бұрын

My old boss use to come out of the office after the painters went home and always sprayed polly undercoat and left the gun and had a brand new $200 star instead of cleaning it out it went in the bin 😳 office people stick to your paper and pen

@nerome619 3 жыл бұрын

I will have four cars to paint over the next three years. Given paint and spray booth hire is expensive, is it worth trying to economize with an FLG5 or should spend the extra and just buy the Prolite with a TE20 and 1.3mm?

@jaykrom852 3 жыл бұрын

I LOVE my Prolites. Scaled back to a 1.2 fluid tip and a TE10 air cap for both base and clear. Nice even flat finishes. Have an FLG3 and FLG4 and much harder to get a good flat finish- the Prolite is a dream come true and worth the extra bucks which you save in sanding and buffing time!

@user-di5ep9bm7l 3 жыл бұрын

Very good job I like it ❤❤❤❤❤❤❤❤❤❤❤❤❤❤ thank you

@szalaj86 Жыл бұрын

Who wins in your opinion? Can you write in order first second third

@otwaylight350 3 жыл бұрын

Gunman can you please do a video for painting upside down like undercarriage. Is it better to use a suction gun?

@barrysmith5466 3 жыл бұрын

You’re better off using a separate pressure pot so you can twist the gun in any direction.

@ronaldpeterson1538 3 жыл бұрын

Gunny... you swear by DeVilbiss....Ryan Evans {Counts Customs} swears by Iwata! Who is the better painter? Ryan Evans... HANDS DOWN! But I love you too man!

@TheGunmanChannel 3 жыл бұрын

It's not a competition

@ivanlebron2003 2 жыл бұрын

Hello Gunman , what is the part number for the PPS adapter that you have for the ANI 160 spray gun

@TheGunmanChannel 2 жыл бұрын

S15 PPS2 adaptor or 15 for the original PPS

@ivanlebron2003 2 жыл бұрын

@@TheGunmanChannel thank you

@sezginusta1391 3 жыл бұрын

Neden bu flg tanitiyorsun surekli.bu alt model bir tabanca ve cok iyi degil

@fredjones1238 3 жыл бұрын

CAN YOU SHOOT BASE AND CLEAR WITH FLG5 1.3 TIP

@jaykrom852 3 жыл бұрын

Look for Gunny's video where he did just that.

@alaskanmancave5301 3 жыл бұрын

I got the FLG 5 on your recommendation, and have not been disappointed. Could you possibly compair the FLG 5 to the FLG 693.

@MrBigwilk 3 жыл бұрын

They are literally the same gun. Just different name depending on which state you buy them from

@alaskanmancave5301 3 жыл бұрын

@@MrBigwilk yeah same gun different air caps

@brendon8702 3 жыл бұрын

i have an FLG5 1.3 and AZ3 1.8 I like the AZ3 feel more

@TheGunmanChannel 3 жыл бұрын

Do you agree the AZ3 has a bit of a small fan for the larger panels?

@brendon8702 3 жыл бұрын

@@TheGunmanChannel The only thing I've ever painted are 1 set of wheels. I used my FLG5 to primer first but then I realised I needed a highbuild to fill in the dips on my flaking chrome wheels so I bought the AZ3, I didn't want to use highbuild in my paint gun. But I did like the way the AZ3 sprayed the primer when I did a re prime after sanding through in some spots. The feel in hand and less weight is what I really like about the AZ3, I'm sure the FLG5 would have sprayed more like the AZ3 if it had a 1.8 tip. The guns are way overkill for me but I like your channel so I wanted something you would recommend. I also got roughly 2meters length of clear urethane hose I conect to my 20 meter main airline for better control and a water seperator between them. I remember one of your videos talking about waiting time between coats, and realised how important that was when doing my wheels.. So I sanded and repainted them to fix the runs :P

@mechanoid5739 3 жыл бұрын

When you say the Ani 160 failed, what actually fails?

@TheGunmanChannel 3 жыл бұрын

I couldn't even say, one just stopped working. I think it was the air valve.

@jones_1996 3 жыл бұрын

Ani f160 1,3 or Iwata w400 bellaria 1,3 for base and clearcoat guys? Which is better and why? Can anyone help

@pedoubek 3 жыл бұрын

what did you buy

@jones_1996 3 жыл бұрын

@@pedoubek I bought the F160 and I'm very happy with it. I'll buy the Iwata bellaria for Clearcoat and use F160 only for Basecoat

@boogznickels4166 3 жыл бұрын

Man this is killing me trying to find a flg5 or a ANI F160 in the USA.. any help will be appreciated

@jaykrom852 3 жыл бұрын

Spraygunsdirect.com in UK. Order on Monday and have it easily by Thursday. Mention Gunman for a free cleaning kit! They are blazing fast.

@nenadstanojevic1427 3 жыл бұрын

Get out there and paint something, and do it well. I think that is going to be my phrase.

@mreightytwenty8709 3 жыл бұрын

Good one mate...from Kiwi

@fredjones1238 3 жыл бұрын

THIS KIWI IS GOING TO GET ONE

@mreightytwenty8709 3 жыл бұрын

@@fredjones1238 I have the ANI great gun

@jasonnash2691 2 жыл бұрын

You're starting to confuse me, another video U did on cheap gun's U say the flg5 is the best & you use it alot. In this video U say the ani 160 is the best & the flg5 is good for at home

@ysr789 Жыл бұрын

Flg5 requires 9.8cfm whereas ani f160 requires only 7.7 . So shouldn’t f160 be more suitable for smaller compressors

@TheGunmanChannel Жыл бұрын

If that's the case I'm very surprised. I use the ani at 45psi so I guess I just assumed it would need more CFM. But I still wouldn't use the ANi at home because the excess pressure required makes a lot of overspray

@alexanderostertag9999 3 жыл бұрын

Hi! Teste Anest Iwata Kieami4.👍

@skeffelss 3 жыл бұрын

Have you ever had a gun grow on you, like when you 1st used it and you were like this gun is rubbish and then the more you use it its like you know what this gun isn't that bad😅😂

@TheGunmanChannel 3 жыл бұрын

That happened with the Supernova, partly because it's a prick to set up.

@skeffelss 3 жыл бұрын

@@TheGunmanChannel 😂

@paulhopkins1905 3 жыл бұрын

I have an Iwatta W400 non bellaria that I bought new for $200. I don't think you could possibly do better for the money

@Kaabosurron 3 жыл бұрын

Same but they went up in price like 350

@paulhopkins1905 3 жыл бұрын

@@Kaabosurron The Bellaria is 350 the W400 is 217 right now on amazon

@Kaabosurron 3 жыл бұрын

@@paulhopkins1905 oh yea but the balleria was at 230 like a few months ago when I bought it

@paulhopkins1905 3 жыл бұрын

@@Kaabosurron damn, thats a steal

@krzysztofwiniarz5653 3 жыл бұрын

👍

@autorepairfaidate4673 3 жыл бұрын

Gunny why do you use the pressure so high ?, I speak for the ani f160 just know the trick and you can lower the pressure a little bit and close the fan a little from half to one turn and close the material a little and can spray at 2 bar max 2.5 bar without problems also lowering the overspray because at that pressure it makes too much cloud for someone who uses it in the garage or do it yourself and does not have the right suction cannot work with these parameters

@sean7193 2 жыл бұрын

I just got the f160 and plan to use it at home...good idea.

@furqatavtoservis1297 3 жыл бұрын

Klass👌

@killamanbro 3 жыл бұрын

Has anyone tried the atom x16 hvlp mini?

@kevgreathead1886 3 жыл бұрын

Got the flg, painted some shit an it's all 👍

@mickholgate3347 3 жыл бұрын

Not surprising the Air Gunza didn't fare well, you are using an older model. I'm certain there are body shop range models now, ie blue flash

@chuckstewart9375 Жыл бұрын

My pic....ANI...F160

@sarahblackburn1 3 жыл бұрын

You need to leave the gun make on the videos longer as we are trying to listen to you then having to backtrack hoping to find the on video comments

@adahoadaho5902 3 жыл бұрын

Ani 160👍👍👍👍👍

@brendanmccarthy7336 Жыл бұрын

FlG 5 nice gun but no parts if it goes wrong. Mine needed a new Spreader valve. Contacted Devilbiss who confirmed no part available. Budget gun they said so basically throw away if it goes wrong. Very disappointed.