The Ultimate Sealed Enclosure - 140db SPL Score - With Only 1,000 Watts

The Ultimate Sealed Enclosure - 140db SPL Score - With Only 1,000 Watts - Part 2

Рет қаралды 47,488

Күн бұрын

Watch me Design - Model - Test & Demo The Most Powerful Sealed Enclosure with NVX VCW122 and Slaps M-12 passive radiators by Earthquake sounds. Watch me achieve an SPL score or 144db at 38Hz with only a 2.5 cubic feet box. Much thanks to Sonic Electronix for providing the NVX Subwoofer in this build. You can support my channel by following the affiliate links below. Thanks in advanced.
Amazon Shopping Links (affiliate):
Passive Radiators: amzn.to/3Df7oBr
NVX VCW122 Subwoofer: amzn.to/3z21VLS
Jasper Router Jig: amzn.to/4dUh6ti
TarAmps MD8000.1 Amplifier: amzn.to/3QYLcC6
Big Jeff Audio (affiliate): bigjeffaudio.com/?ref=Lhka1FQ...
5% Discount Code - BUDGETBASSHEAD
SUBWOOFERS -
CT Sounds MESO 8 Subwoofer: amzn.to/3ZuGSfg
CT Sounds MESO 6-5 Subwoofer: amzn.to/3LZ0rr2
SUNDOWN:
Sundown Audio SA-8: amzn.to/3fa5Ryt
Sundown Audio X-8: amzn.to/3zNqyvI
SKAR AUDIO:
Skar Audio SDR-18: amzn.to/3ndFY9D
Skar Audio MA-8: amzn.to/2yj0Wus
Skar Audio ZVX-8: amzn.to/2KQf0OQ
Skar Audio VXF12 D2: amzn.to/3a5ep6e
Skar Audio SDR12: amzn.to/375fkSz
Skar Audio SVR12: amzn.to/2tB6vCd
TORO:
Toro Tech Force 12: amzn.to/37Bd3SK
Toro Tech - Fierce 12: amzn.to/3d7najB
TORO TECH - Force 8: amzn.to/3ckrIUs
AMERICAN BASS:
American Bass XFL12: amzn.to/2S8OlRX
Audiopipe TXX BDC412: amzn.to/38hRtQM
Massive Audio:
Massive Audio Hippo: amzn.to/34rG01g
Massive Audio Hippo XL12: amzn.to/34rG01g
Others:
Power Acoustik MOFO12: amzn.to/2S687xg
Resilient Sounds Gold 12: amzn.to/2KIXbEp
Subwoofer Enclosures -
Skar Audio SK2X12V: amzn.to/30lwo5R
QBomb Dual Vented Horn: amzn.to/30klUDV
Speaker Wires:
Skar 12-gauge OFC speaker wire: amzn.to/3rnPFyG
Tools -
TarAmps MD8000.1 Amplifier: amzn.to/3MprtrV
Audio control LC2i: amzn.to/3UmSpeE
SPL-Lab Mini Bass Meter: amzn.to/3FG6vDv
SMD Tools: amzn.to/3Umx8BK
Oscilloscope Multi-meter: amzn.to/2z44pgN
Audio control LC2i: amzn.to/2VGzNeh
SPL-Lab Mini Bass Meter: amzn.to/2Xu7vU0
Chapters
0:00 - Intro
2:00 - Purpose of This Build
3:15 - Unboxing VCW12
3:45 - Unboxing Slaps M-12
4:30 - Model Your Box - Sketchup
6:16 - Building Subwoofer Box
13:30- Installing Subwoofers & Radiators
17:08 - How To Inspect Sealed Enclosures
20:35 - Thanks To Big Jeff Audio
21:15 - SPL Test - Non-Weighted Passive Radiator
28:48 - Music Demo - Non-Weighted Passive Radiator
Play Lists -
Learn More About Band-Pass Builds: • Band Pass Builds
12”Competitions: • 12 Inch Subwoofer Comp...
Skar Audio: • Skar Audio
American Bass: • Skar Audio
Power Acoustik: • Power Acoustik
AudioPipe: • Audiopipe
Impala Sound System: • Impala System
Learn How To Count Acoustic Orders: • Counting Acoustic Orders
DISCLAIMER: This video description contains affiliate links, which means that making a purchase, after following the links, supports the content of this channel. Thanks in advance.
Links to all the products featured in this video can be found in the description section below. All purchases do support the channel; enabling us to bring you more valued content such as this. Thanks in advanced and happy shopping.
#nvx #bigjeffaudio #budgetbasshead #caraudio #subwoofer #passiveradiator

Пікірлер: 226

@robertmontalvo597 Ай бұрын

This is one of the best basehead channels

@joshholden8561 Ай бұрын

It really is I just wish he had time to make more videos.

@dammdaniel9953 Ай бұрын

Yup a B A S E H E A D for sure 😂

@vcente671 Ай бұрын

Wish I had some good *_BASE_* in my car

@trab5933 Ай бұрын

That's cold for nvx v3.... GREAT VIDEO

@BudgetBassHead Ай бұрын

@@joshholden8561 you and I both!

@PRINYATIP Ай бұрын

OMG.... Presentation....editing...MUSIC selection. SUPERB!! I Had to grab the popcorn 10 seconds into the video... 👊 ✊️ 🤛 🤜 👊 ✊️

@BudgetBassHead Ай бұрын

Thank you so much 👍

@pirvirts Ай бұрын

@@BudgetBassHead думаю если пассивные радиаторы повернуть в сторону водителя, или в сторону крыла, а динамики в сторону крышки багажника то можно сломать лобовое стекло)

@meade916 Ай бұрын

a PR setup should always have double the cone area of the actual sub being used. If you doubled those PR's it would actually perform a lot better than it does. Just one of those subs with both those PR's would be Ideal. Just a little tip for next time...looks cool though! Looks like it's slapping hard as well. edit: just noticed the AMM-1, hell ya! badass!

@BudgetBassHead Ай бұрын

The AMM1 has been one of the best investments for my channel. Love your creativity. Keep inspiring us. 👍

@keithhaynes5348 Ай бұрын

Steve Meade; so flipping humble he just drops a little gem in the KZfaq comment. Thank you Sir for your knowledge, experience, and all around (bad, lol) attitude.

@TimpBizkit Ай бұрын

He did a single sub with two radiators in another video (140 dB with 1000 watts), but two subs with 4 radiators would be ideal. And of course your shop system was slapping hard!

@jaz97 Ай бұрын

I thought was double the displacement of the woofer not so much the cone area. So if I PR can move x2 the air of the sub it's fine.

@drrckhamilton Ай бұрын

@@jaz97 Yep, that's what I have always read as well.

@richarddonkoh8978 Ай бұрын

You nailed it this time bro.there is no passive radiator video on KZfaq comes closer to it. Very educative and the sub sounds very amazing. Keep up the good work bro.

@kennydaddy100 Ай бұрын

Great job with this presentation! Very informative.

@BudgetBassHead Ай бұрын

👍

@jakebsowders357 Ай бұрын

Thank You for everything you do for us Bassheads

@BudgetBassHead Ай бұрын

Is my pleasure!

@allthingsaudio4610 Ай бұрын

Man you deserve a certificate of appreciation. You're video editing skills are immaculatant.

@BudgetBassHead Ай бұрын

Accepted. 💯

@HardKnoxAudio Ай бұрын

That into was epic bro!!!!!

@evilinside5984 Ай бұрын

@BudgetBassHead- Im so glad you took my suggestion, and used a pair of active subwoofers, with a pair of these Earthquake Slaps units! These Slaps passives are unlike any other passive radiators i have seen. 99% of most people think you need to have 2x the cone area, as a passive radiator= false, the passive needs to have @ least 2x the Total displacement. So 1 of these Earthquake Slaps passives will work, as long as the 1 active woofers Total X Max, is 50 Mms or Less. These babys perform Awesome, and in such a tiny space! Great video, and Awesome Db score 🎉, plus bandwidth seems great as well!

@BudgetBassHead Ай бұрын

I was absolutely amazed at how small the box can be. I do plan to get this further, so stay tuned.

@evilinside5984 Ай бұрын

@@BudgetBassHead -Oh, i can't wait❤️!

@fd1596 Ай бұрын

25mm not 50mm. I also did a similar design last year with two VCW122v3s in 1.5cf each, and while everyone was saying I would need two WinISD and, Bass Box Pro was saying otherwise. 👍

@evilinside5984 Ай бұрын

@@fd1596 - No, i meant what i said, 50 mm Total X Max= Both ways. If i would have said 1 way X Max, then i would have been wrong, but i said Total. How well did your setup perform, with 2-12" v3s, in 3 cu. Ft. Net, and 2- Earth Quake Slaps? How much power/what amp, and impedance? Did you meter it? What size vehicle?

@fd1596 Ай бұрын

@evilinside5984 50mm would be peak to peak excursion. 25mm would be Xmax which is measured one-way. I have them running on a JP23 in the same orientation (Subs up, PRs back) with an AC Epicenter on a 25Hz filter. They play deep, and the sound amazing on every type of music I throw at them. It's one of my favorite setups. I would definitely like to try them in a 2.25 net per sub like my first VCW single ported design, but with two PRs per sub, and compare the output to the smaller box. It's in a Civic that has a tiny trunk. Never cared to meter it, but it's definitely loud, deep. 👍

@bassbomb3 5 күн бұрын

Your knowledge and ability to explain and teach is unmatched. I highly appreciate the videos man.

@mrreggiej85 Ай бұрын

I really appreciate the work you are doing with the video quality and science of sound.. Please never stop!

@BudgetBassHead Ай бұрын

I appreciate that!

@frothyshoes Ай бұрын

I love that setup dude.

@DavidCakl1 Ай бұрын

Great video again! Passive radiators are amazing. Bought myself Slaps m10 paired with Alpine R2. Best combo i ever had. And i even had JL 12W7 :D

@brockmarquis8511 Ай бұрын

Always love to see your videos. You make great content. Addressing important issues such as the pr. Thank you.

@BudgetBassHead Ай бұрын

I appreciate that!

@rndmlogin Ай бұрын

Have always loved your format. You present in a very informative way even for newcomers without sounding condescending while presenting basic things. I like the tips and tricks you give too. Even if I knew some of them already, it is great form to include them and also good reminders (oh yeah I forgot that). The biggest thing is your composition and editing skills are growing in every video! Skills! I hope you are having as much fun making these as we are watching them.

@BudgetBassHead Ай бұрын

Glad it was helpful!

@fd1596 Ай бұрын

I did a similar design with two VCW 122v3s. Its a 1.5cf net per chamber with 150 grams of weight on each Passive Radiator. Everyone was saying that you have to run two passive Radiators per driver, but with 2" of xmax I knew the one would be sufficient. Good video. 👍

@SnubBarracuda 22 күн бұрын

This is truly an epic moment! One day we will look back on this video and say this is the moment EVERYTHING CHANGED!

@midbass.maestro Ай бұрын

Happy ur posting vids again. Been waiting on this like my next paycheck

@BudgetBassHead Ай бұрын

I injured my back a few months ago. Is glad to be back

@midbass.maestro Ай бұрын

@@BudgetBassHead take care of yourself the culture need u 💪

@gowayneshipman Ай бұрын

Killn' it BB! hope ya back gets better quick!

@homerbuntin4751 Ай бұрын

I just bought myself a pair of the radiators after watching this. I might pick up the NVX's next.

@ThomasNygard-my9jt Ай бұрын

A good alternative to the NVX is the Dayton max-x driver's. The Dayton max-x driver's have great cone area excellent x max. And fantastic motor force. Built a 2 10 box for them and they work amazingly well and they are taking easily double rated RMS. I am lucky to ride share with the guy that I built them for. He sends them to limit often and they sound great. And they are very affordable.$110for the 10. $150 for the the 12 and $180 for the 15. I had the 15. Very good driver. Needed space back. So went to 2 CT sounds xl 12s sealed also sound great. And they require a fairly small box also.

@arthurhughlett2292 Ай бұрын

Bro! 😮 Great vid man!

@dripcheghxulium4545 Ай бұрын

Ngl It Sounds Like Steve Harvey Narrating This Video😂😂😂😂 But This Is A Nice Build

@TheBoofGod Ай бұрын

That's why I laughed lol man I swear he sounds like him

@dripcheghxulium4545 Ай бұрын

@@TheBoofGod 😂😂😂

@olbakerman1672 Ай бұрын

I've been wanting to do this for years or at least see it done. I told my boss at the audio shop we should be building these a year before kicker launched their passive radiator line.

@1sickfiestast618 Ай бұрын

I’m currently building a single 15” and 2 15” passives in a behind the seat truck box. Cant wait till it’s done. Yours is badass

@chokechange Ай бұрын

Passive Radiators are slept on big time. Same with Infinite Baffle.

@TimpBizkit Ай бұрын

@@chokechange they have value in smaller boxes where port compression would rob the max SPL. Also Steve Meade used some 18" Ascendant Audio drivers with two 18" passive radiators each box and that system was slamming his entire garage.

@j-dub8558 Ай бұрын

Superb 👏 Vid - Wonderful System 🎉

@Tekatogokuta Ай бұрын

looks great

@ApEsXiT Ай бұрын

Nice setup in the garage homie!❤

@BudgetBassHead Ай бұрын

💯🔊

@SmalltimR Ай бұрын

Daaaaamned that is impressive!

@jonathongaleano2893 Ай бұрын

Amazing video! Love you content

@BudgetBassHead Ай бұрын

Glad you enjoy it!

@randyorton7044 Ай бұрын

Amazing video thank you

@BudgetBassHead Ай бұрын

💯

@edjackson4389 Ай бұрын

Great video!!

@BudgetBassHead Ай бұрын

Glad you enjoyed it

@jeffreyabercrombie Ай бұрын

Awesome

@mrsmith2475 Ай бұрын

Great video, you should do a comparison without the passive radiators.

@BudgetBassHead Ай бұрын

Great suggestion!

@soundguy1031 Ай бұрын

Respect for using passive radiators. It really is unused potential in a lot of set ups

@christopherkerr2254 Ай бұрын

Sealed,,,, high power,,,,accurate,,,powerful

@TommyGunn2208 5 күн бұрын

Dude you somebody now having S.M. commenting 😂😂..Love your channel brother

@randyman78596 Ай бұрын

stealing this build for my accord!

@BudgetBassHead Ай бұрын

Enjoy!

@adammarsden2643 Ай бұрын

I'd like to try the 15"s same line in this configuration altho fs looked a bit higher at 31 ish only issue

@MrCitizenKaned Ай бұрын

NIce, I have a Slaps 15" and a Dayton Audio ultimax UM15, in a 3.2 cubic feet box also have a home cinema sub(css sdx15 xbl2) with an fs of 19.2hz to try if the Dayton don't play too well. Some great tips for the box too and that Jasper cutting jig is the shiz, I got one a few months ago and all my cutouts are perfect now.

@dreci3001 Ай бұрын

You've stayed consistent and upped your game, congrats. I'm so jealous of that Jasper jig. First run 129dB @ 126W draw, I call that total victory. Please get that meter out of the footwell and closer to head high. You don't listen in the car with your head on the floor, might as well minimize some unwanted vibrations. Very nice build and nice drivers. How would you personally compare Sealed vs. Ported vs. Pass Rads in terms of sound? It might be an interesting series to see those subs in different configs. All in all a very nice video, keep up the work. ;)

@BudgetBassHead Ай бұрын

💯

@claybob7729 Ай бұрын

Yeah I agree. Would be interesting to see the performance in difference enclosure types, even though the driver is better suited to one over the other

@Macross580 Ай бұрын

Maaaan was just talking to one of my boys about PRs then I see your video pop up saying 'uploaded an hour ago'. The universe works in some mysterious ways cause I was looking for your update😂 I gave my bud 2 of my EQ PRs yesterday👌I highly recommend you try the V2s or the Pump12s. The Pumps cone and surround look slightly different inside the horn . I just upgraded to Pride M12s and still curious how they would sound in a PR box though the Qts is higher than the M9s 15s in my video. Hmmmm shall we build and find out? 🤣

@BudgetBassHead Ай бұрын

I say go for it!

@efondamontgomery3390 Ай бұрын

Deff love the box build.. What's the last song test played?

@joshuakemp1439 Ай бұрын

I habe two skar vxf 12s after displacement 2 cuft per sub. If i wanted to add a single radiator sub how much room would i need to add. Its share the chamber and center port. Im curious to see what it would do in my setup but my know how ends at the passive radiator

@nighttow8780 Ай бұрын

I loovvee NVX

@iamgriff Ай бұрын

Can we see how a shallow mount, with a PR would perform? I am still searching for more DB’s in my single cab F250.

@louisstennis8413 Ай бұрын

Hey i want to know if you can try sundown sav2s 12s in that box?

@williamblackwell9558 Ай бұрын

The Slaps M-12 are hidden gems. There is no better passive radiator. I use 2 of them with one Savard HI-Q 12 in a 1.6 ft box at 31HZ.. I am building the 2nd box now. With a DATS v2 PR systems are easy to tune using an Impedance Sweep. I am positive you can add 2 more Slaps M-12 and get better results. Great work.

@BenHeien Ай бұрын

i was looking at them, wanted to try 2 with 2 12" Stereo Integrity SQLs... they want to be tuned down to 24hz in 1.6 cuft each and need a LOT of port area with the 28mm 1 way xmax. theres no info out there on these PRs!

@williamblackwell9558 Ай бұрын

@@BenHeienI used the sealed box size or a little smaller for my woofer. When the box is built use a DATSv3 or any way you have to run an impedance sweep. It's best to use 2 slaps for 1 sub. When you run the sweep you will see 2 hump or 3 humps depending on the number of PR's you use. The trick is to get all the humps to the same level by adding weight to the slaps. Turn the bolt around so you can add weight from the outside then when you get the sweep- right turn the bolt back around. The more weight the lower the tuning but also the lower the spl, you can fix that with more power.

@kristoffslovijk9637 Ай бұрын

I have 6 cheapo Kenwood Road Series 250 watt RMS subs in a sealed enclosure on a "500 watt" Rockford Fosgate amp and it does 145db. Each sub has its own chamber in the enclosure. Can't wait to run em at their rated power. 😆 NVX subs are pretty cool. I love the chassis on em. I've got two that are blown that I'm going to make into a couple of monsters when I rebuild em. Anyway, I'm just babbling.

@BudgetBassHead Ай бұрын

That's a nice setup. Keep us posted on the upgrade.

@scottbe1 Ай бұрын

🧢 🤣

@chokechange Ай бұрын

You can probably make a knot on each side of the hole you made in the divider and caulk it up if your priority is to seal it more.

@Laserred01 10 күн бұрын

Recently I created sort of an experiment sub box. At the time, the slaps were super expensive (they've been going from $40-100). So I bought 2 cheap 12s and removed the magnets. Created my own mount (2"pvc) to the voice coils and weighted them properly with metal washers. Did some testing to get the frequency where I wanted it. This setup of an Alpine type R 12", the 2 12" radiators, and 400W really surprised me! And the low frequency response is crazy with the Epicenter! Out of curiosity, same setup but with a much cheaper Kenwood budget 12" sub. Still amazing results! Next experiment was the Alpine 12" type R in a larger vented box (1.5cuft) vs the kenwood 12"/radiator setup. The radiator box wins no contest! So the

@Brandencarroll1 Ай бұрын

Can passive radiator builds get windy like ported builds do?

@kyleburnfin2504 Ай бұрын

So, do we have A/B testing on SPL, w/ and w/o the radiators?

@timstarnes8587 Ай бұрын

Pretty sure you know already, but those passive radiators are tunable. You can add washers to that bolt in the center and lower the Fs.

@kimballlewis5030 Ай бұрын

Recently found your channel again yeah I took notice of that situation I've been into cardio for a number of years and I've tried many different things passive radiators back in the day I would have two subwoofers in a box and unhook one of them and I found just by having that other woofer in the box and would allow me to hit lower. I was very interested I was wanting to do something similarly what I originally wanted to do was like one 10-inch sub and then I was going to get like two of the radiators the earthquakes. But I ended up not going through with it and I'm running a single 10 skar DDX

@patrickwaterman4959 5 күн бұрын

link to the battery you are using in your trunk plz ?

@ChrisAudette Ай бұрын

What if you shared the airspace without the dividing wall with the resonance be bigger and deeper

@bellajay713 Ай бұрын

Can u do another video with them tuned lower? Maybe 28hz

@obiwon7650 24 күн бұрын

Sweet build Bruh👍🏾

@mrvg35 Ай бұрын

What lithium battery r u running, and is your alternator stock?

@biggklown7644 Ай бұрын

Very informative. I was wondering if I could correspond with u and possibly either get sum help or at the very least, sum pointers. Lol. I need help with designing a box, help with my lithium battery. I'm hoping u can help me out bro. I'm an old school basshead/newbie...lol

@charlesreedy9330 Ай бұрын

You should try to add 2 more passive radiators

@BudgetBassHead Ай бұрын

video coming soon.

@RyanBassForLife Ай бұрын

Nice but you got to buy the newer NVX vcw v3 1500rms watts and a better cooling system by adding rear perimeter coil vents. My dad has a newer 15" NVX in a 2.25 cf box on a 2000rms watt amplifier. It hits ✔️ it out everyone.

@BudgetBassHead Ай бұрын

Thanks for the info

@rynev3392 Ай бұрын

Passive radiators are interesting because not many people use them, yet you get similar performance to ported boxes without the possibility of port noise (which is just distortion)

@BudgetBassHead Ай бұрын

And to add to that, you save a tremendous amount of space. For example, 4 12-inch subwoofers usually required a minimum of 4 cubic feet of space. Yet this setup is nearly half of that

@rynev3392 Ай бұрын

@@BudgetBassHead exactly…. I’ve noticed when modeling boxes in winISD that at 30hz it’ll take generally 4 subs sealed to get similar SPL output that a single ported sub. Passive radiators are really the best all around setup for size/output/sound quality. I’m wondering if you could give even more output if you added 2 more passive radiators on the other side of the box 🤔

@RandoManFPV Ай бұрын

It's cuz they cost as much as the subwoofers people use them with. Like you said similar output to ported except you pay more money to avoid the chance of port noise

@TimpBizkit Ай бұрын

Glad to see you've doubled up your last enclosure, though would have thought 4 passive radiators would be better. You'll have to stick the weights on though or the tuning will go way up. Though with 100mm Xmax (is that peak to peak?) the single passive radiator might suffice.

@jaz97 Ай бұрын

Always wanted to do a PR build. I should have got them when they was $50!! Lol

@davidwalton2410 Ай бұрын

This is such a great channel. Keep up the excellent work bro 💪!

@BudgetBassHead Ай бұрын

Thanks! Will do!

@BassFace1776 Ай бұрын

How would you compare this box vs a regular ported box? I've had 100s of systems, this might be what I've been looking for. Sealed SQ with porter output

@BudgetBassHead Ай бұрын

I see it as the best of both worlds

@bgondron Ай бұрын

not sure if I missed it, but what is the name of the music? great intro btw, gave me goosebumps

@user-hn1cs1bp5y Ай бұрын

I wonder what it would sound like if the passive radiators were tightened up a bit so they don't move more than accept themselves.I wonder if it would get louder than one forty four

@JoshuaBarrio Ай бұрын

Think we need a full video. Use weights on those passive subs

@jodesiboyd4848 Ай бұрын

🔥🔥🔥

@joshuakemp1439 Ай бұрын

Also just gor giggles trying firing the active off back and radiator off top of trunk. Run same test

@timstarnes8587 Ай бұрын

I was thinking the same thing!

@TimpBizkit Ай бұрын

Well the higher frequencies are amplified more closer to boundaries. The passive radiator has the lower frequencies so can be further away and still considered boundary loaded, so this makes sense.

@BudgetBassHead Ай бұрын

Good tip

@1ohmwrecker Ай бұрын

I use same hydraulic lift to hold my box lol.

@garywillis7253 Ай бұрын

Off topic here how did you hookup all the power at your battery with that fuse/junction box..I have a malibu which is basically the same as your car..They didn't make it easy

@BudgetBassHead Ай бұрын

Never run any wire after a fuse from that junction box. Make your connections before the fuse junction box. And use your own fuses for any additional positive wire.

@dannycreech4177 21 күн бұрын

Waaaaaangin!!! 💪🏼👊🏼💯

@tkc_datopkat901 Ай бұрын

love your content bro I'm experience in sealed enclosure yourself 20 yrs of it messing around with sealed enclosure

@BudgetBassHead Ай бұрын

Thanks for watching!

@user-ro3uf6ji7u Ай бұрын

تجربه مع sub ام دونهم ايه افضل مع 4 ام 2 subwoofer

@ricktroxell6448 4 күн бұрын

I was really surprised by these subs I bought 2 off of marketplace in a triangle ported box man them subs were bangin they will take 1500 watts all day long even though there RMS is rated at 800 to 1000

@josephsaucedo8691 Ай бұрын

I was wondering were you got the passive radiator from. To bad you couldn't do 2 cylinder type boxes with a sub on one end and the passive on the other end of the cylinder. Similar to the old bazooka tubes or the jbl Bluetooth speakers wich sound pretty good for the size.💯👍✌️💪

@BudgetBassHead Ай бұрын

Shopping links are in the description. Passive Radiators: amzn.to/3Df7oBr NVX VCW122 Subwoofer: amzn.to/3z21VLS Jasper Router Jig: amzn.to/4dUh6ti TarAmps MD8000.1 Amplifier: amzn.to/3QYLcC6

@theegreatest9322 Ай бұрын

How much for a box like this ?

@gbresaleking 12 күн бұрын

Couldnt you seal the wire hole with some caulk or does it not matter since its so small ?

@BudgetBassHead 12 күн бұрын

It matters. And yes, but wasn't necessary

@PooNinja Ай бұрын

17:06 I was mixing some music one day and couldn’t figure out what this certain noise was… I kept muting tracks to see which one it was coming from. I turned off the monitors and… there was an ice cream truck outside. I guess I need better acoustic treatment in that room 😂

@georgepearsall1817 Ай бұрын

Hey budgetbashead I'd love to know your thoughts on equal passive radiator cone area to activate versus double passive cone area to activate like in the other video. Thank you for your videos.

@BudgetBassHead Ай бұрын

A plan to do a follow-up video and test that theory.

@evilinside5984 Ай бұрын

@georgepearsall1817- Most people think you need 2x the active cone area, for the passive radiators to work right. Its not 2x cone area, its @ least 2x the Total displacement. These Earthquake Slaps are unique, because they have over 100 mm of Total X Max! So as long as the same diameter active speaker, has a Total X Max of 50 mm, or less, 1 per active, will work great. Other companies ive seen that make passive radiators, have such little Total X Max, that they require 2 passives per 1 active driver. This is where the Earthquake Slaps units are leaps and bounds ahead of other passives! As far as sound/preference goes, Passives perform= higher Db scores, but sound like sealed enclosures, you pick the tuning freq. with the combo., of air space provided, and the amount of Mass put on the Slaps units. Smaller airspace= more boom, less low freq. extension, bigger airspace= Less boom, but more Low freq. Extension.

@twinkyunouwantmycreamfilli8297 Ай бұрын

Ive always heard that the passive radiator works well being one size larger . Like, 10 inch sub with 12” radiator, or 12" sub with a 15" radiator.

@milesbachelor8747 Ай бұрын

Nice. Actually two separate enclosures. Did air space become an issue with four 12” radiating surfaces?

@BudgetBassHead Ай бұрын

The entire interior shakes. Needs treatment

@milesbachelor8747 Ай бұрын

@@BudgetBassHead Oh I’m sure it does shake. I have dual 10s ported because 12s would not have enough air space to hit the lows I wanted. Wondering if this box outperformed the previous box you built.

@drrckhamilton Ай бұрын

Hey, thanks for the video, bro. Good work and good build. If you could please answer a question for me, I would really appreciate it. Earlier in the video, you showed the inside of the box, and it appeared that you removed the "TUNING WEIGHTS."" Maybe it was just the angle of the video shot. I watched it again, and I can't tell. Can you confirm this and possibly speak to this briefly. Thanks, and keep up the good work

@BudgetBassHead Ай бұрын

The passive radiators come with large weights that drops the tuning to around 25Hz. Thats too low for daily music, so I removed them; tuning now is around 35Hz.

@drrckhamilton Ай бұрын

@@BudgetBassHead Did you put a smaller washer or simply remove it altogether?

@AceBase5 Ай бұрын

You should review the American Bass XR

@Macross580 19 күн бұрын

Yoooo....Working on another PR box my man. Just uploaded a video of it👍👍👍

@BudgetBassHead 19 күн бұрын

I will check it out

@TechnikToni-Overtribe Ай бұрын

Overall great to see such informative videos with PRs but on thing, technically a Box with PRs is not actually a sealed box cause it performs quit diffrent frome a sealed box to clarify it it performs like a Ported box but the bonus you get there is no port which could be noisy or takes away box volume so you can build more compact than a same tuned ported box

@scamchan Ай бұрын

Where you storing all of these builds you do?

@BudgetBassHead Ай бұрын

😁 everywhere.

@sS-wx7tc Ай бұрын

Im sure you folks can feel that in your head phones

@gib919 12 күн бұрын

So, if you wouldv've used 2 terminals, you would have the "Seal" for each chamber, right?

@BudgetBassHead 12 күн бұрын

Exactly

@DIYAudioGuy Ай бұрын

🔥🔥🔥🔥

@BudgetBassHead Ай бұрын

Glad you like it. Thanks for stopping by 💯

@SoberBassHead Ай бұрын

Amazing video!!! I’m not sure if this has been said or not but if you added another passive per side you should gain some volume (you are supposed to use 2x the passive for each woofer)

@Dingleberry1856 Ай бұрын

Two times the displacement. Not two times the number of cones.

@SoberBassHead Ай бұрын

@@Dingleberry1856 this is correct, only one passive has 113.1 cubic inches of space wile it’s recommended to have 226.2 of passive per 12” sub. It would be much more impressive with the proper amount. This is actually shown in the first video.

@michaelhollon5332 18 күн бұрын

Those PRs look exactly like the first generation Magma subwoofer from the late 90s except the bolt in middle. The first generation was only made for a couple of years before they changed the basket, the cone, and switched to dual 2 ohms instead of dual 3 ohms. I've been using the same subwoofer since 1999. Earthquake made in the usa

@BudgetBassHead 15 күн бұрын

Thanks for sharing!

@tighttdasbino2928 Ай бұрын

All I know is during the frequency sweep my van was singing those sweet sweet tones of bass from 35hz to 28hz. 😂

@SnubBarracuda 22 күн бұрын

Some day we will dynamic enclosures that can change size and shape to match output frequency on demand.

@robertmartinezjr8413 Ай бұрын

This is fk’n great , enjoy the video for sure impressive but “19:08 now I hurt my back” and then box leaks 😂😂 bro forgive me I’m stoned 😂😂 ., I’m going to forward this to a few friends 🤙🏽🤙🏽

@gib919 4 күн бұрын

🤔, So if I go with lets say 4 slim line 8's and 4 Earthquick slaps, in a custom trunk build should go well then...

@ZoeyR86 Ай бұрын

With passive rads, the rule is an 8-second minimum your losing efficency if you press a rad it should take a minimum of seconds for the woofer to drop back down this is maximum leakage recommended to prevent the rads from over extended during long bass runs. You seal up the box properly and your going to see .1-.3db gain and a slight drop in fb3. I had 3 of those eq rads on a 3.2³ft box with an avatar stu 1546 d2 and did 147.3 at 39hz. With the rads invert mounted for tuning weights. You really want to tune the box so you can use as little weight as possible as the more you add, the less power handling they have at lower frequencies. Also I compound 6th order with a small sub and large rads and be insanely efficency. I used 2 6.5in subs in a 6th order with 2 of the eq 10in raids 1 on each chamber with a 2/3 ratio and tuned to a 58-28hz bandwidth and is was stupid 142db on 980w rise to 1.74ohm

@TimpBizkit Ай бұрын

I was thinking about 6th order with passive radiators, but using a slot port for the high tuning and a radiator for the low tuning, so from the outside it looks like a ported box.

@kimballlewis5030 Ай бұрын

But yeah I did not have the top of the line in the X like you have I have the one the next one down I think it says that it handles I think it says it handles like 500 W or something around there and let me say that is that's subwoofer sounds good like I said I didn't get the ones that you have I got the next level down and I didn't keep it because I was trying to run a little too much bass through it and it was bottoming out but I mean I could have just got like two of them. But yes they sound really well the sound quality cuz I think one of them is sound quality subwoofer and then the ones that you have are supposed to be more for SPL