Excellent video - concise and to the point. I wish other builders could post videos this way, instead of wasting our time with 'Part 8' and 'Part 9', with the model still not completed. Well done all around! Thanks for posting.
@chrisb19693 жыл бұрын
I like both ways more detail for those who want to see how and all in one for those who prefer a single sitting overview.
@diazmalinkov45583 жыл бұрын
Отличная работа. Видео сборки супер. Я тоже собираюсь приобрести себе такую модель. Удачи в дальнейших проектах.
@shenawix2 жыл бұрын
Excellent video build. One of the best kits from Tamiya
@SaurianSoul2 жыл бұрын
I doubt you're still watching comments on this video, but in case you do. I'm brush painting with acrylics, do you think I'll get away with not priming the small parts like you even though I'm not using airbrushed enamel/lacquer?
@leecheon10843 жыл бұрын
I enjoyed watching from start up to last...i love tamiya😍😁
@darrenidris71363 жыл бұрын
a tip: watch series at flixzone. Been using them for watching lots of of movies during the lockdown.
@brunoricky79663 жыл бұрын
@Darren Idris Definitely, have been using Flixzone for months myself :)
@danguidone72893 жыл бұрын
An absolute joy to watch, I was captivated, even as an experienced modeller! Loved your use of wash to really makes those details pop!
@dragoonzen Жыл бұрын
Dam, looks freaking amazing.
@keithsmodelsandrcs65934 жыл бұрын
She tuened out amazing great job 👍,, Keith
@plamodelstudio4 жыл бұрын
Thanks^^
@user-ps2hu4ug8o4 жыл бұрын
what a super crazy details.. cool.
@plamodelstudio4 жыл бұрын
Thanks.
@josh786manchester4 жыл бұрын
So satisfying to watch.. attention to detail is impressive!
@plamodelstudio4 жыл бұрын
Thank you so much!
@AlbertoQuintanar3 жыл бұрын
I have that kit, I think I´ll make it now because i didn't know hot to use Tamiya Polish Compund, nice job btw!
@charliemdz74864 жыл бұрын
What a beautiful piece.
@plamodelstudio4 жыл бұрын
Thanks^^
@willychua11362 жыл бұрын
Hi, what a great build. Just to check if u use the recommended paints or u have to reformulate ur own colors
@SSecret_Hugz2 жыл бұрын
beautiful vid, hope your channel grows.
@plamodelstudio2 жыл бұрын
Thank you very much!
@Ralle19683 жыл бұрын
Love it 😍😍😍
@icemacaron5472 жыл бұрын
Nice work
@atsylor55493 жыл бұрын
My next project is going to be a motorcycle. And I’m definitely leaning towards this one. Yours came out great. Can you easily take the plastic covering on and off to display the engine. Or is it covered for eternity?
@moglly19232 жыл бұрын
Super well built !!! I just ordered it and wanted to know if there were problems with the model or something I have to look out for?
@CurvedSlightly2 жыл бұрын
I'm having the finger cot idea. That, is G E N I U S !
@mikepullen57332 жыл бұрын
Superb build and quality photography. New sub from me 😊
@mundodasminisdeduasrodas2 жыл бұрын
vERY GOOD!
@hardypingen22284 жыл бұрын
Nice
@dannyg2252 жыл бұрын
Nice. I'm currently working on the same kit. I saw however you missed three things: decal Ducati logo front fender, decal on the red stand and the two footpegs ;-) But I guess you don't have these parts anymore, after two years
@reikojons2 жыл бұрын
music sounds like an AM radio
@yoshi_winter964 жыл бұрын
It's a high level artwork
@smjyo5yo53 жыл бұрын
Good👍👍👍👍👍
@jlcotton196814 жыл бұрын
Nice.
@plamodelstudio4 жыл бұрын
Thanks^^
@Baztation3 жыл бұрын
so good
@DESVERGNES2 жыл бұрын
Very clean and interesting video. I've noticed you don't use any primer coat before painting. Can you please confirm?
@plamodelstudio2 жыл бұрын
Hi, Normally I don't use a surfacer on any parts except body parts.
@ilex_st4k__8082 жыл бұрын
Can you please tell me all necessary tools you used?
@pc44pilot943 жыл бұрын
Hi, nice work.. Did you clear coat parts before using panel liner or just straight over the paint?. Thanks
@plamodelstudio3 жыл бұрын
Hi Normally I paint in gloss color before clear coat. For matt color, I paint gloss clear on any color and then panel liner and finally matt clear coat again.
@angelasperanza54233 жыл бұрын
😃😃😃😃😃
@AnnabEthdami78133 жыл бұрын
Wow just direct spray on kit without primer
@tomdayler1953 жыл бұрын
Can i have all of your paint specific to completed this 1199s? This is my first time to built this
@chrisg960211 ай бұрын
I wish I could afford this kit
@moltomezzopiano3 жыл бұрын
Don't you prime the small parts such as engine, exhaust pipes, etc? Great stuff, by the way!
@plamodelstudio3 жыл бұрын
Nop I just painted primer on bodies and metal parts.
@moltomezzopiano3 жыл бұрын
@@plamodelstudio Nice! And apparently the paint sticks quite well, right?
@franksinatra83292 жыл бұрын
23:50 Hi ! What types and brands of laquer super clear gloss do you use? Thankyou!
@angelasperanza54233 жыл бұрын
Che. Bello
@ichbinderrizal3 жыл бұрын
Do I need to buy spray paint? Or it’s optional? Does the item comes with stock color? Thanks
@plamodelstudio3 жыл бұрын
Hi you need to buy tools and paints seperately.
@TheJamesm19802 жыл бұрын
What do you use to clean the panel line accient off with?? Always been worried about using this but that looks nice
@CurvedSlightly2 жыл бұрын
Enamel thinners
@andrewhartley73253 жыл бұрын
Hi I'm going to be building the bike you have built on the video is it ok to ask questions and get tips if it's ok many thanks Andy
@takebetterphotos29273 жыл бұрын
nice work. why didnt you drill the rotor holes?
@plamodelstudio3 жыл бұрын
Hi, I was not that skillful at this time. This was my fisrt bike model actually.
@helldevil562 жыл бұрын
Does somebody know which paint set should I buy to paint my model? All I can find are general paint sets
@satonakahalu10403 жыл бұрын
I tought tamiya come with color..just plug n play...this is ridiculous..so many color need to buy..with air spray..brush..hmm
@mandyhumphries44153 жыл бұрын
Can you get it built
@BlackghostKiller2 жыл бұрын
Would you ever sell this model?
@davidlourensz48224 жыл бұрын
That looks great. What brand of paint did you use?
@plamodelstudio4 жыл бұрын
Hi, I use Tamiya lacquer paint.
@davidlourensz48224 жыл бұрын
@@plamodelstudio ...oh ok. Great, thanks very much.
@liruizhu21464 жыл бұрын
Dulux paint, definitely!
@davidlourensz48224 жыл бұрын
@@liruizhu2146 :)
@sanavk27363 жыл бұрын
can you please give the buying link
@andrewsandoz80052 жыл бұрын
It's a shame all your beautiful attention to detail has to be covered up.
@lunkprab3 жыл бұрын
Is the suspension working?
@plamodelstudio3 жыл бұрын
Nop
@icewatercoolstudio75963 жыл бұрын
Which paint can change color on exhaust pipe?
@plamodelstudio3 жыл бұрын
Alumium color based then clear blue, clear yellow and clear red. Thanks^^
@parmindersingh99823 жыл бұрын
Purchase khaa se krna hai ye
@Clintaustin3 жыл бұрын
Donyou sell it?
@fabiangluck8334 Жыл бұрын
Hi! Would you sell your finished model? Thanks in advance!
@tjuan74 жыл бұрын
Need to try my hand building a motorcycle. never built one before.
@plamodelstudio4 жыл бұрын
I hope you make it someday soon.
@lanced.26543 жыл бұрын
Do I have to paimt them?
@plamodelstudio3 жыл бұрын
LANCE D. Yes you need to paint every single part.
@lanced.26543 жыл бұрын
@@plamodelstudio I thought it was like a gunpla
@free-flow Жыл бұрын
9:09 NG. Wrong assembly
@lucasfam21643 жыл бұрын
It so good can I have it
@mawmaya3 жыл бұрын
Do you sell it?
@edenlee77522 жыл бұрын
Hii how much did you spend in total to assemble this.model,including the paint and paint gun, basically all the required materials (and where u get them from). I am a newbie and would like to attempt building one of the motorcycle kits from tamiya!!
@plamodelstudio2 жыл бұрын
Hi, I think it would take a day to assemble and take more than twice times to paint including drying. You can easily find them at a any local hobby shop or internet like Andy's Hobby. Thanks.
@hasyadayanaazmirlina57183 жыл бұрын
can u list all the colour that need to buy..
@hasyadayanaazmirlina57183 жыл бұрын
and tools also
@angelasperanza54233 жыл бұрын
Il. Panigale
@handian73723 жыл бұрын
Salam kena ya bang alex. Mau nanya nih beli nya di mana ya tuh motor2an nya bantu jawab ya bang makasih
@Motomini123 жыл бұрын
Minat rakit motor juga Bang? 😁
@2.4wheelsNfuse Жыл бұрын
Where to buy?
@plamodelstudio Жыл бұрын
You can buy any internet hobby shop. It's Tamiya product.
@edenlee7752 Жыл бұрын
Hi did you use acrylic or enamel paint
@plamodelstudio Жыл бұрын
Hi, I used lacquer paint
@edenlee7752 Жыл бұрын
@@plamodelstudio ohhh I see. Any tips for firdt time air brushing to paint the model? Like what are the other materials needed along with paints (eg. Paint thinner, primer etc)
@plamodelstudio Жыл бұрын
First #600-800 sand paper work on a plastic part then #1000-1200 surfacer and painting.
@edenlee7752 Жыл бұрын
Is the surfacer a primer or sandpaper?
@marekstumpf3 жыл бұрын
Nice work. Why don't you sand the lacquer with sandpaper? polishing is not enough to see a fine semolina structure...
@plamodelstudio3 жыл бұрын
Hi, when I made this bike, I was just beginner and not so skillful^^
@trendcenter86342 жыл бұрын
I want one kit how can i buy it I'm from India
@dr.onn26363 жыл бұрын
Can the wheel rotate?
@plamodelstudio3 жыл бұрын
Nop
@dannyg2252 жыл бұрын
@@plamodelstudio It should
@isaacE244 жыл бұрын
does it provide you with the necessary tools?
@plamodelstudio4 жыл бұрын
Only a screw driver included. You need to buy hobby tools.
@danielhusson98753 жыл бұрын
T est trop fort ’mais ou sont les pistons ’moi j ai acheté un lego ,ducati et il sont la lalalalala!,,,!,,,,,,,,,
@user-ly6te6ye5i2 жыл бұрын
一塌糊涂
@sercazper7723 жыл бұрын
I want one of this bike but already build, can u help me with that please
@sun-fe9im3 жыл бұрын
yes , 150$
@leejinhao51574 жыл бұрын
Suspension can work or not ?
@plamodelstudio4 жыл бұрын
Jin Hao Lee It doesn’t work.
@leejinhao51574 жыл бұрын
@@plamodelstudio is all the model also can’t work?
@plamodelstudio4 жыл бұрын
Nop
@leejinhao51574 жыл бұрын
@@plamodelstudio then what model can work it?
@Motomini123 жыл бұрын
@@leejinhao5157 if you are looking for working suspension, check TSM brand for this particular model
@andrewhartley73253 жыл бұрын
Hi I'm starting to build this modal but I'm at a part where I don't know where is goes hope you an help me the part is C27 hope you can point me in the right direction many thanks Andy
@plamodelstudio3 жыл бұрын
Hi, C27 should be on before C43 and C29 are assembled. Please try it to be on one side first.
@andrewhartley73253 жыл бұрын
@@plamodelstudio thank you much appreciated
@andrewhartley73252 жыл бұрын
When you painted the forks for the bike did you go by the coulor in the book or you're own choice ?
@uyngane3 жыл бұрын
If that wasn't such a cheap display turntable, the bike would look real!