Рет қаралды 1,385
NOTE! You can build your 24v and 16 cells only with one BMS !! See our new video :
• Build your own 24v Lif...
Build 16 Lifepo4 cells to 24v wiring, installing and use for 3Kw PV system - 24 volts battery bank JK BMS
Build 16 Lifepo4 cells to 24v 4.4Kw battery with 2x JK BMS Step by step wiring installing and use it
From 16 Lifepo4 cells to 8sP2 24v wiring, installing and use for 3Kw PV system - 24 volts battery bank JK BMS
1. We connect the cables from the bms to each individual cell.
2. We start the first bms.
3. We start the 2nd bms.
Everything seems to work normally.
We'll see right away if we didn't make a mistake.
4. Now we have to connect the bms in parallel.
The cable is not enough, so we make a cable and connect the black cables from the bms.
5. We mount the temperature sensors, I put one on a terminal and the other somewhere on the batteries.
6. But first let's enter the application and set the batteries and then unlock them, because yes at that moment, they are locked.
7. A modification I made !! I cut in half the red wire used to paralel banks and i made a y connection to distribute the current equally.
It is very important to install a fuse or circuit breaker!
In this way you will protect the system.
Everything is going normally, at least I think so.
I need an electrical panel for fuses and thick cables.
After a few days of use, the system works normally.
Soon I will wire everything properly and I will make a video to show you if this video will get enough views.
If you like this video,
Please: leave a comment.
And, if you want, subscribe to the channel.
Thank you.
--SAVING OUR HOME--
Green Energy Section bellow: Saving nature saving our home, the earh!
Website: pvsolarsim.com for more details
--My ocuppation--
Our Android Games and apps:
play.google.co...
Apps:
PV Workshop Calculator
PV Solar Sim
Driving Secrets
List with Android Games:
The Savior from Sky (helicopters)
Truck Driver Job (obviously)
Neuro IQ Increaser (Test your general knowledge)
JumpoMania (jump to survive)
How to build a 4Kw battery with 2X Series JK BMS for 24 volts pv system ! by Mr. Artisan S.
#jkbms
#diy
#homemade
#24v