build a $20 bender

Рет қаралды 853,501

5 жыл бұрын

In this video I build a cheep bender for RHS (square steel tube) it should be able to bend up to 20mm with a 1.6mm wall but will need to be bolted down with a stronger handle bar before I try that, the former's are available in many sizes so with extra holes the bar will be able to be used on different former's so the cost will not go up by much per size
follow on social media at
/ juscozcustoms
/ juscozcustoms
/ juscoz
Track: Last Heroes - Dimensions [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Last Heroes - Dimensio...
Free Download / Stream: ncs.io/DimensionsYO

Пікірлер: 941

@TheBigShow902 2 жыл бұрын

I misread the title as "build a $20 blender" and was halfway through the video wondering where this was going lol

@dandavis8300 2 жыл бұрын

That's probably what the dog was thinking; he looked kind of dubious.

@juscozcustoms 2 жыл бұрын

Yeah from my experience a $20 bender normally starts with tequila not a weight plate

@skylark4901 2 жыл бұрын

How the hell am I supposed to make a frozen vodka drink with this?!!!😖

@alexrhodes6732 2 жыл бұрын

I'm dyslexic so I misread the whole title

@zachchenoweth6622 2 жыл бұрын

Same, and when he stated "bar bender" I still heard bar blender. Not at all disappointed in the video as this is still something useful.

@walterkersting6238 2 жыл бұрын

The dog never quits with those sideways looks...

@juscozcustoms 2 жыл бұрын

He is funny like that.

@jacobkern4922 2 жыл бұрын

😂

@leoantonio 3 жыл бұрын

Finally a DIY video with music that isn’t horrible.

@juscozcustoms 3 жыл бұрын

I tried hard for not horrible.

@vipertoothpaintball5724 2 ай бұрын

I dig the lobby music

@AmericoNeves-bo4xt 3 жыл бұрын

The most easyest, cheaper and practical bender i have saw, great job.

@juscozcustoms 3 жыл бұрын

It could use a stronger handle and to be bolted down to make it work better

@trevinskiking2165 2 жыл бұрын

@@juscozcustoms & have different dia weights.Cheers Mate Trev New Zealand

@juscozcustoms 2 жыл бұрын

@@trevinskiking2165 being able to use different size weights for different bend diameters is the main idea behind this machine. I also want to visit NZ to do some research on mini jet boats 😁

@trevinskiking2165 2 жыл бұрын

@@juscozcustoms Minijet boats ? small world I designed & built my own ply one in my teens...for best bang for buck use an old jetski motor & outdrive but hang on !

@juscozcustoms 2 жыл бұрын

@@trevinskiking2165 I have an old "jet sprite" jetboat that was built by doen waterjets in melbourne Australia probabbly late 80's or early 90's I brought in 2008 it is a 12 foot fiberglass that was built with a toyota 18Rgu engine but I want to rebuild with a honda k20 or k24

@tomortman4850 2 жыл бұрын

Love the simplicity and the low cost. Thanks for posting.

@juscozcustoms 2 жыл бұрын

I think it is a good starting point to get fabricating small projects. I used it to make my own power wheels if your interested

@windmill10 3 жыл бұрын

Love the manager keeping an eye on the progress in the background.

@juscozcustoms 3 жыл бұрын

I slip him some treats so he leaves the workshop whenever I do something dodgy.

@jogrant3851 2 жыл бұрын

@@juscozcustoms haha.

@insanehobo01 3 жыл бұрын

great build, i was going to comment about the lack of ppe for the corgi, but the pooch used common sense and looked away at the right time, smart breed Corgies

@juscozcustoms 3 жыл бұрын

he is the good boy. plenty of shed smarts pity he sheds in the shed and I have the floof to prove it if you see my more recent videos

@nlo114 2 жыл бұрын

Pooch Protection Equipment ?

@ProleDaddy 2 жыл бұрын

Fire hazard?

@trevinskiking2165 2 жыл бұрын

@@ProleDaddy Stop Trolling him - he's experienced Enough.Trev New Zealand

@recyclebills 3 жыл бұрын

Best homemade bender I've seen yet.

@juscozcustoms 3 жыл бұрын

Just wait till I make version 2 😁

@recyclebills 3 жыл бұрын

@@juscozcustoms What I love most about this one is the ease with which one can acquire and change out the wheels.

@juscozcustoms 3 жыл бұрын

That was the idea @@recyclebills the next version will retain the option to use different size weight plates but also the forming dies from the suprising good $200 Amazon/ebay bender that I tested last year.

@LuisHernandez-he53 Жыл бұрын

My favorite part of the video, "I built mine, you bought yours."

@juscozcustoms Жыл бұрын

Thanks. I have a different phrase or quote at the end of every video. So there might be a few others you find amusing

@michaelpendleton6725 3 жыл бұрын

I love the dogs expressions 🤣

@juscozcustoms 3 жыл бұрын

#shedcorgi is a very intelligent doggo so it only seems right that he would question my actions. :)

@ryandavis930 2 жыл бұрын

@@juscozcustoms 👆

@brucecampbellforpresident1393 3 жыл бұрын

Working on a project have no idea how much this has helped thanks to you hope your dog is well .

@juscozcustoms 3 жыл бұрын

Thanks for letting me know. Im about to make a new and better version of this bender if your interested and shedcorgi is doing well and celebrated his 10th birthday just over a month ago

@JackieRice Жыл бұрын

The best part of this video... your trusty companion who never leaves your side. 🥰

@juscozcustoms Жыл бұрын

Shedcorgi. He makes an appearance in almost every video but sometimes it's a bit like a where's wally because he is just in the background for a few seconds

@markfryer9880 2 жыл бұрын

As soon as I saw you buying a weight from Kmart I knew that I was going to like this video. Scored yourself a new subscriber.

@juscozcustoms 2 жыл бұрын

Lol K mart customs Thanks for joining the channel Mark

@BL-hk4bk 2 жыл бұрын

I love how the dog looks away during the drill press part.

@juscozcustoms 2 жыл бұрын

yeah he is a good little worker. knows when to use the safety squints.

@joelblea4992 4 ай бұрын

Agree. I was worried he would get metal shavings in his eyes.

@misterkelley9740 2 жыл бұрын

First time seeing your videos, love the patient pouchy sitting waiting for dad to finish the project. Facial coat and pattern is gorgeous.

@juscozcustoms 2 жыл бұрын

I agree he is gorgeous and patient he also appears in almost every video I make if you are interested I playing spot the #shedcorgi

@SuperNorthsea 3 жыл бұрын

WOW, great video. Thank you for sharing your creative work. Love the simplicity and cost for getting the job done.

@juscozcustoms 3 жыл бұрын

Thanks.

@Maxxis1941 2 жыл бұрын

If you were to stack two or three same sized plates this idea could bend some pretty thick wall and large diameter tube with a longer leverage bar. The bends could be made smaller or bigger depending on what diameter the plate is. Brilliant idea. Thanks for sharing this.

@juscozcustoms 2 жыл бұрын

That was exactly the idea behind this bender and using a weight plate. They seem to be available almost anywhere on the planet either new or second hand. Also yes with it mounted to something solid and attaching a longer and stronger handle you should be able to bend bigger sections of steel

@1nvisible1 9 ай бұрын

*@**1:26** Your dog: ("Hey, even I could make that thing!")*

@scottm5425 3 жыл бұрын

Really good, I'll be making one of those. Thanks for uploading.

@juscozcustoms 3 жыл бұрын

Keep in mind this is only suited to light wall rhs the way I built it with a hollow handle and not bolted down to something solid but address these two things and it will work a lot better. I am also planning to build a better bender in the next month using tube dies from the $200 ebay bender I tested a few months back and making it really practical.

@ricksanchez3176 2 жыл бұрын

Nice. Leaving that little overbend fix in there was good because it's gonna happen. I like that measuring setup, no guessing, no caculating.

@juscozcustoms 2 жыл бұрын

Glad you like it. Another good trick if your bend is in slightly in the wrong place you can over bend it then roll the bend along the steel to the right place but that gets hard if your using larger sections.

@jacksonvillereclaimedwood6709 3 жыл бұрын

Nice build! Finally I’ll use the weights I bought!

@juscozcustoms 3 жыл бұрын

Its good if you have different sizes. Then you can just chose the radius you want

@lantzeerie2481 2 жыл бұрын

Thats amazing. I never thought of doing it like that. So simple! Good stuff.

@juscozcustoms 2 жыл бұрын

Thanks.

@gianfrancofronzi8368 3 жыл бұрын

You can see the intelligence of the dog, it wanted to watch every move.

@juscozcustoms 3 жыл бұрын

He is a very smart little friend, I can talk to him like my child but he actually does what I ask him to do. He does watch what I do intently learning everything, I'm sure that he could even cook breakfast because he has watched me do it enough times but I feel the lack of opposable thumbs holds him back.

@ejcastro9518 2 жыл бұрын

The dog is the very best part of this video! 🥰🥰🥰🐕

@vinny2957 2 ай бұрын

I spent hours trying to work out how to bend aluminium boxing and your video solved my issues. Great job.

@juscozcustoms 2 ай бұрын

Glad it helped

@ApprenticeGM 2 жыл бұрын

That's a great, simple, cost-effective solution for a DIY'er like me - thanks for sharing!

@juscozcustoms 2 жыл бұрын

Thats good because DIYers and hobbyist where my target audience with many of my videos

@fonhollohan2908 3 жыл бұрын

That's freaking Brilliant and cheap too.

@juscozcustoms 3 жыл бұрын

The next version will cost a little bit more but will be a lot more capable. Hopefully I will get it built this month

@artstudio9673 3 жыл бұрын

Great idea! Note: if you reduce the diameter of the Bering that goes in the weight then the tool can use in different size weights for different radiuses. Back in the day I just used a vertical sander to thin down the OD of a race for a bearing to make it fit ( was for a boat trailer). Nice Job!

@juscozcustoms 3 жыл бұрын

That was one of the ideas behind this build to be able to use other size plates. It will be better when I finish the next version of the cheap bender that will be much more capable and do larger sizes of RHS and tube.

@paulraymond1804 Жыл бұрын

But he's used a standard weight plate - "1 inch" hole. All of the "standard" weight plates use this diameter. It's only the olympic plates that use a different hole diameter, and that is 2 inch.

@waltertrejo2534 Жыл бұрын

This is awesome! Nice job. I need a metal bender so looks like this will be my next project.

@GetRealwithMike 11 ай бұрын

@@paulraymond1804 so we should get what size OD bearing for the 1" plates? Thanks

@thebob3712 10 ай бұрын

if you use different size plates then you have to have multiple holes in the shs tube for the outer bearings to accommodate for different diameters, weakens the shs if you have to put a bit of force to pull it. unless you make a bar for each size plate

@blitzerrrrrrr 2 жыл бұрын

If anyone owns a C5 corvette they know what driveways can do to the lower rad support, but your video just saved me $985 cdn!! Im going to make my own thanks to your video.

@juscozcustoms 2 жыл бұрын

That's cool. I recommend bolting it down and using a stronger handle something like 50x25mm. goodluck and have fun fabricating.

@louisomalley1394 2 жыл бұрын

Well done. It is very afordable. I think the QA inspector is a nice touch.

@juscozcustoms 2 жыл бұрын

Thanks. The inspector is good to have around

@gfbasagre 3 жыл бұрын

awesome idea mate!!! thank you for uploading

@juscozcustoms 3 жыл бұрын

All good. Glad you liked it.

@philgoogle1535 3 жыл бұрын

Great idea. Love the dog🐾👍

@juscozcustoms 3 жыл бұрын

Me too!!! 😁

@chrisgenovese8188 2 жыл бұрын

Love the simplicity! Thanks

@juscozcustoms 2 жыл бұрын

Simple and effective.

@haraldlonn898 9 ай бұрын

Geeat idea. Love it. Thanks.

@juscozcustoms 9 ай бұрын

No problem.

@peternikolis1476 3 жыл бұрын

Love the Ingenuity I've made similar in the past but I never thought of using a weight would have saved the time it took me to plasma cut it and machine it down on the lathe. Nice work champ

@juscozcustoms 3 жыл бұрын

Thanks. I decided to use a weight plate because they are cheap plentiful and available all over the world so anyone with a drill can make one. Also If your lucky you can get a whole set on facebook marketplace cheap.

@danielpilon3472 3 жыл бұрын

thanks for making this great video!

@juscozcustoms 3 жыл бұрын

Thats ok

@davidch880 2 жыл бұрын

What a great idea! Thanks, mate.

@juscozcustoms 2 жыл бұрын

That's ok

@williamlott7612 2 жыл бұрын

Love the idea. Thanks for your efforts. Darlington, South Carolina USA

@juscozcustoms 2 жыл бұрын

Thanks. Hope it's a good day in South Carolina

@DoingItCheap 3 жыл бұрын

You just earned a new subscriber. And I love your dog !!

@juscozcustoms 3 жыл бұрын

Thanks for that. I also love him :)

@gjensen500 2 жыл бұрын

Thank You for posting this video. It's a great ideal. I suppose one could use different size radius weights to make different size bends. Also, one could stack same size weights and use a blow torch to heat materials to bend larger pipes. Have you ever tried those ideas? Please let me know. Just curious.

@juscozcustoms 2 жыл бұрын

The different size weights will definitely give different size bends which is why I used it. It won't work overly well on pipe and larger box sections will work better with heat.

@quocducnguyen 10 ай бұрын

Best diy bender I found so far on KZfaq. Thank you!

@juscozcustoms 10 ай бұрын

Thanks. It will need to be scaled up for larger diameter materials but the process is still the same

@LNRRidez 3 жыл бұрын

You Sir are a genius! I will be using this method to bed some square tubing for a mini bike build Im doing!

@juscozcustoms 3 жыл бұрын

I am going to be building a better version of this soon that will be much more capable but if you can't wait to see that it will have a solid shaft in the middle instead of the bearing and it will be solid mounted then the arm will be a lot stronger (probably 25mmx50mm).

@renhoek 2 жыл бұрын

Thanks so much for posting this. I was stuck trying to figure out how to be my aluminium square tube for a motorcycle project and your video inspired me to have a go at making one. I put it together this afternoon and already have bent a couple of tubes 20mm square with 1.2mm walls 👍. Only need small bends at the moment, probably 15 degrees or so. I ansee a very small amount of sidewall buckle at these low bends so I suspect anything more than 30 degrees could be a problem for me. Thanks so much again.

@juscozcustoms 2 жыл бұрын

that's awesome to hear, Generally it is impossible to bend square section without some amount of deformation on the inside. I would like to see some pictures of your build if you could share them to the Juscoz customs Facebook page.

@trevinskiking2165 2 жыл бұрын

Ren ...if you've got an oxy gas set & if you pack your square tube with wet sand I think your problem will be reduced, and maybe experiment with 1.6 mil square but as the writer said I don't think you'll eliminate all in mid steel but you may in Alloy.Goodluck Trev New Zealand

@drivestowork 2 жыл бұрын

Fantastic! Round conduit benders start at $30 and just go up and up... Just a quick glance online, the cheapest square tube bender I saw started at $230!?!

@juscozcustoms 2 жыл бұрын

This method also allows you to chose the radius of your bend just by using a different weight plate.

@vociferonheraldofthewinter2284 9 ай бұрын

This is what I've been looking for. Thanks

@juscozcustoms 9 ай бұрын

Glad it is helpful 🙂

@stevenbaity4260 3 жыл бұрын

That's was very fascinating to watch really enjoy your video can't wait to see what else you come up with

@juscozcustoms 3 жыл бұрын

I'm glad you liked it. I have a few playlists that you may be interested in. there is a minature car that I built using this bender that I call The Cubman it is a half scale lotus 7. There is also an offroad drift trike and a mini offroad buggy that I built for my 2 year old that is electric.

@matthwy1 Жыл бұрын

Great build! Thank you for showing how to make something practical and truly DIY, unlike the other channels that pretend that a lathe, plasma cutter, CNC, etc. are common DIY equipment!

@juscozcustoms Жыл бұрын

I definitely wish these machines were common in my shed. I do have a lathe now but only because it was on marketplace cheap. As for the builds I try to share knowledge in my videos to help anyone who wants to have a go at fabrication

@gregwitkamp5583 3 жыл бұрын

your dogs eye expression are priceless

@juscozcustoms 3 жыл бұрын

He has quite the personality.

@brucemartin8435 3 жыл бұрын

Your right about the the dog. He is beautiful and hilarious!

@juscozcustoms 3 жыл бұрын

@@brucemartin8435 the best comedians don't n need to say anything.

@chrishale8714 3 жыл бұрын

Take care of your dogs eyes. Beautiful dog

@juscozcustoms 3 жыл бұрын

@@chrishale8714 I am always cautious about eyes. Its hard to tell from the angle but corgi is a safe distance from the drill press. I always send him out of the shed if I am welding or grinding because I also have to protect them gorgeous ears

@AtticBuilds 2 жыл бұрын

That is amazing, and so simple.

@juscozcustoms 2 жыл бұрын

thanks, it is a handy little machine

@coryboes7118 9 ай бұрын

Nicely done!

@juscozcustoms 9 ай бұрын

Thanks.

@Richo00o 3 жыл бұрын

Damn that was was to easy to get good bends out of 😂 great video mate I’m gonna have to make one of these for sure

@juscozcustoms 3 жыл бұрын

That's good to hear but I hope you can hold off for another week or two because I am going to make a new version that is even better and way more capable.

@o2boutdoors 3 жыл бұрын

Shed Corgi is skeptical, but it looks like a great setup for rectangular tubing. Have you tried it on round tube? My concern is that the narrow bearing shell would dent it. Time to fab up a larger bushing!

@juscozcustoms 3 жыл бұрын

I actually have a ebay/amazon tube bender that cost $200 and does a great job on the round stuff (I did a video on it). I'm going to make another bender that uses both the weight plates for square and the other benders dies for the round it should be a good little project.

@o2boutdoors 3 жыл бұрын

@@juscozcustoms Funny, I just watched that video a few minutes ago. Hadn't seen it when I watched and commented on the other one.

@juscozcustoms 3 жыл бұрын

Hopefully the next bender will be the best of both.

@thestone3849 3 жыл бұрын

Really Intelligent one. No complications, nothing , looks and IS very simple KIS

@juscozcustoms 3 жыл бұрын

it is a handy thing to have but needs to be bigger and bolted down to do larger sizes

@bismasunassee9737 3 жыл бұрын

Thanks, never seen such a simple and cheap one.

@juscozcustoms 3 жыл бұрын

The new one that im building at the moment is not quite as simple but it will be much more capable and not to difficult to replicate

@researchcapt 2 жыл бұрын

The best part of this video are the looks on your dogs face.

@juscozcustoms 2 жыл бұрын

he is a funny little fella

@davidf8663 3 жыл бұрын

This video legit just saved me $500. Thanks for posting this!

@juscozcustoms 3 жыл бұрын

I would recommend that you bolt it down and make a longer stronger handle I would use 25x50. I am going to be making a new better version of this soon that should be much more capable.

@peteraq5501 2 жыл бұрын

Brilliant, just brilliant. Thanks

@juscozcustoms 2 жыл бұрын

No worries. It is definitely a handy little tool.

@trevorbyron9448 2 жыл бұрын

Ingenious idea...just what I need

@juscozcustoms 2 жыл бұрын

Awesome. Hope it helps you to make something cool

@aaronmccann3246 3 жыл бұрын

Shop pupper says this is my chair!

@juscozcustoms 3 жыл бұрын

#shedcorgi claims all the things. Even though he has an amazingly comfortable shedbed

@lesliecruzado2793 3 жыл бұрын

Now I wonder what else have you made that I've missed...

@juscozcustoms 3 жыл бұрын

Well i have 150 videos so far and as soon as things settle down at home with the new addition I'll be making more. But if you are interested I did a video in February 2021 about reaching 1000 subs and I went through the list of almost everything that I have built previously with links to all the videos in the description

@martinduddridge329 2 жыл бұрын

@danielsvamp 2 жыл бұрын

@wesleygoldstone4770 3 жыл бұрын

Simple and effective, Nice.

@juscozcustoms 3 жыл бұрын

Simple and effective, that's the best way to do it. start complicating things and you just add cost

@mattleggett5609 2 жыл бұрын

Quick and simple!! Id maybe go on and mount it, although we all have slightly different limitations in our work shops but I may have to make one of these soon, thank you!!

@juscozcustoms 2 жыл бұрын

I recommend mounting it. If you want to use different sizes of die's you could mount a large bolt to the bench then it would be easy to change die's and definitely add a bigger handle.

@marioncobretti7870 7 ай бұрын

80 dollar bender after todays inflation

@juscozcustoms 7 ай бұрын

Not far off

@walter2990 2 жыл бұрын

If you didn't understand him, your dog was waiting for his safety glasses. 😉

@juscozcustoms 2 жыл бұрын

Thanks. I didn't have any that fit him so I sent him out of the shed before I started with the die grinder that would definitely throw the chips far enough to get him

@collowood 2 жыл бұрын

Wow great advice mate.

@juscozcustoms 2 жыл бұрын

Glad it is useful advice

@peterxyz3541 2 жыл бұрын

Nice!!! When you got more brains than money, you create your own solution! 👍🏼👍🏼👍🏼

@juscozcustoms 2 жыл бұрын

I seem to be a lifetime member of that club. 🙄 But it does help with creativity 😁

@rosswoolley2854 3 жыл бұрын

Now you can make a "metal dog frame bed" That will be the best.

@juscozcustoms 3 жыл бұрын

shedcorgi already has a metal framed "shed bed" but I did use this tool to build a small car chassis. go check out the cubman playlist if your interested

@johnnyotero1957 3 жыл бұрын

Nice video but you need to give measurements you need to let us know the measurements and how are you bending it what are the measurements of drilling the holes and what band we get out of it but other than that it was an excellent video I liked it

@juscozcustoms 3 жыл бұрын

Thanks. I decided not to give dimensions because it all depends on the weight plate that you use. I am planning to make a cheap bender in the next week or two that will utilize both the forming dies from the $200 ebay/amazon bender that Idid a video on last year and weight plates like this one. I will include all the dimensions for how to build that one because it will be made to suit any former you can find up to 25mm/ 1 inch both round or square if all goes to plan

@tgreening 3 жыл бұрын

Maybe he should come over to your place and bend it for you too.

@stuffbywoody5497 10 ай бұрын

I've actually got a few scrap rounds of steel and a few bearings sitting around not doing anything, and I can see how this can be easily made adjustable too. I think I just found my next project that's gonna help me with a few other projects. Thanks mate.

@juscozcustoms 10 ай бұрын

Sounds good. Just make sure the bearing is big enough and not to close to the edge of the round because that can put extra load on the bearing and they can explode.

@stuffbywoody5497 10 ай бұрын

@@juscozcustoms , I've got a few sets of bearings that are spares for the medium/heavy duty courier type trolleys. They should do the job well enough I reckon. I'll just take it a little easy at first and work my way up.

@juscozcustoms 10 ай бұрын

@@stuffbywoody5497 as long as the bearing has a gap at least twice the thickness of the material you want to bend you shouldn't have to many issues. It means the bearing is just guiding the material onto the die not being part of the forming process

@stuffbywoody5497 10 ай бұрын

@@juscozcustoms , cool. Thanks knackers.

@oddjobbob8742 3 жыл бұрын

Nice build. Very clever!

@juscozcustoms 3 жыл бұрын

thanks oddjobbob very helpful also

@ocotillodavid2296 2 жыл бұрын

Dogo still should have had eye protection.

@juscozcustoms 2 жыл бұрын

Thankyou for your concern I decided that he was at a safe distance for the speed that I was drilling. but when I had to get the die grinder out I took him right out of the shed because there is not a safe distance inside the shed with the speed the die grinder throws chips

@felixcat9318 3 жыл бұрын

Excellent presentation, it's really good to find this channel. Subscribed.

@juscozcustoms 3 жыл бұрын

Thanks felix cat

@guillermonieri4203 2 жыл бұрын

I had to look at this again, just in case I need to build one. Thank you again.

@juscozcustoms 2 жыл бұрын

Hope it helps and you manage to fabricate something cool

@nicolasnareshkumar 3 жыл бұрын

My good and holy God...the best bender I have seen !!! I was skeptical before the bend and when he got to done..I was laughin !!! ...brother.. you are a genius

@juscozcustoms 3 жыл бұрын

Thanks. I'm glad that I was able to convince you with my actions. If I was going to build this again I would bolt it down and make the handle longer and out of something stronger. But I am going to make the next one different and a lot better so hopefully I can do it this month

@welshhomestead 2 жыл бұрын

Very clever - thanks for sharing!

@juscozcustoms 2 жыл бұрын

Thanks for letting me know that it was appreciated 🙂

@alazanjoe 6 ай бұрын

AWESOME IDEA, THANKS FOR THE VIDEO

@juscozcustoms 6 ай бұрын

Thats ok

@pixelbeaststudio 2 жыл бұрын

Incredible, thank you so much!

@juscozcustoms 2 жыл бұрын

It's simple but effective

@grahamirwin4233 11 ай бұрын

And change weights for differing radius bends. Brilliant, many thanks 👍

@juscozcustoms 11 ай бұрын

Exactly 😁

@wrstlngstud82 2 жыл бұрын

Pretty smart. Well done.

@juscozcustoms 2 жыл бұрын

Thanks

@ianfrancisledesma4431 10 ай бұрын

Pure and simple genius!

@juscozcustoms 10 ай бұрын

Thanks.

@terryjackson4538 2 жыл бұрын

My Hijet is deadset getting a Canopy and now I know how! Top Job!

@juscozcustoms 2 жыл бұрын

You will be using a larger size steel for your frame probably 25mm so make sure the bender is bolted down and has a better handle probably 25x50 at least a meter long I am going to make a better version soon

@davidcox4980 2 жыл бұрын

Love it bro!

@juscozcustoms 2 жыл бұрын

Thanks man.

@Titanium369 2 жыл бұрын

Great build. thx for posting

@juscozcustoms 2 жыл бұрын

Thanks for watching

@Titanium369 2 жыл бұрын

@@juscozcustoms pleasure was all mine. glad I got some ideas. thank you.

@juscozcustoms 2 жыл бұрын

😁

@bradameerbeg6422 5 жыл бұрын

Good music choice, man. Great video. Neat tool.

@juscozcustoms 4 жыл бұрын

Thanks, awesome, and that's what she said...

@delbertsmith5229 3 жыл бұрын

Simply perfect...thanks

@juscozcustoms 3 жыл бұрын

simple and perfect... glad you like it

@cra4war 3 жыл бұрын

Great idea and your dog is awesome

@juscozcustoms 3 жыл бұрын

I totally agree with this statement.

@GaryT1952 2 жыл бұрын

So well behaved! ❤️ Corgis...Nice bender also

@juscozcustoms 2 жыл бұрын

Thanks

@MajorDrama1 3 жыл бұрын

Awesome real simple way to do a good job

@juscozcustoms 3 жыл бұрын

And its really easy to get different a radius just by getting different weight plates

@diydarkmatter 2 жыл бұрын

i see alot of home made cobble job tools on KZfaq . i liked this one wasn't a cobble job and worked really well . good job

@juscozcustoms 2 жыл бұрын

Thanks. If you like we'll built things then check out "the cubman" half scale car build that is the reason I made this bender.

@1waukesha 2 жыл бұрын

Well hot diggity damn if that ain’t a hell of a good idea son. Thanks for sharing!

@juscozcustoms 2 жыл бұрын

Heck yeah happy to share. Glad you enjoyed it and I hope it helps you to fabricate something awesome

@davidshettlesworth1442 2 жыл бұрын

awesome, thinking outside the box!

@juscozcustoms 2 жыл бұрын

I dont think I have the box any more I think I mush have customised the box

@MaryAnnNytowl 2 жыл бұрын

The dog's close-up and "comment" literally made me burst out laughing! I subbed at THAT moment! Freaking great stuff!

@juscozcustoms 2 жыл бұрын

#shedcorgi is quite the character. He has been in almost every video if you want to play spotto.

@user-hb8be5wb4q 3 жыл бұрын

And that puppy is a great deal better than a shoulderlookingboss!!! Good puppy!!! And the puppy trusted you to do it right! Great vlog, great subject, thanks for posting and sharing with us. I subbed and gave a high five, would have been a high ten, but, pup said it wasn’t necessary!

@juscozcustoms 3 жыл бұрын

Thanks for the sub and I hope you enjoy the builds that I have already done but also some of the things that are planned for the future. All hail shedcorgi... he is great company in the shedquarters,

@ronheflin7848 2 жыл бұрын

What a great idea. I am going to go out and get all the parts and make it today

@juscozcustoms 2 жыл бұрын

Awesome. I recommend a stronger handle than what I used probably 25x50mm or 1x2inches

@wolfiemcwolf6617 9 ай бұрын

Great solution! Essentially made a $700 follow former out of cheap bits an pieces. I get more pleasure out of making tools like this than I do buying the super expensive off the shelf varieties.

@juscozcustoms 9 ай бұрын

I also like to make tools but I love using them to make other things. After I made this tool I used it to build a microcar called the cubman. Fun fact The piece I bent in this video is actually part of the cubman chassis if you watch the first video

@paulanderson388 9 ай бұрын

The bender is cool, but the dog stole the show!

@juscozcustoms 9 ай бұрын

He does that. 😁

@timkunk3498 2 жыл бұрын

Bloody brilliant!

@juscozcustoms 2 жыл бұрын

Thanks Tim

@timkunk3498 2 жыл бұрын

@@juscozcustoms 🌟

@eomax8835 3 жыл бұрын

Really helpful , thanks for sharing .

@juscozcustoms 3 жыл бұрын

Glad it was helpful.

@ShafaqIftikhar-pw9ld Ай бұрын

Great video!!!!!

@seniorLu48 Жыл бұрын

Gracias, what a great idea. now I'm planning on bending some round electrical conduit using this idea.

@juscozcustoms Жыл бұрын

I have another bender that came from ebay/Amazon that works really well on light wall round for $200 if your interested. I made 2 videos abut it

@guillermonieri4203 3 жыл бұрын

Excellent. Thank you.

@juscozcustoms 3 жыл бұрын

Thanks for taking the time to let me know.

@aussieauntynette6892 2 жыл бұрын

Great mate! 👍👍 Thanks heaps, I'll definitely be making that in the next couple of days! New subbie 👍, again thanks, simple and to the point. Smart dog. Have a great day 🦘🇦🇺🦘

@juscozcustoms 2 жыл бұрын

Thanks Aussie Aunty Nette. You might want to try doing this with a smaller diameter piece of steel to make scroll work for gates if you like that.

@jackrichards1863 2 жыл бұрын

Gidday Aussie. So you're from the big island thats part of New Zealand ay? At least there's intelligent life on your island . Ya call them Aborigines I believe?

@juscozcustoms 2 жыл бұрын

@@jackrichards1863 sometimes I wish we where the west island with the Muppet we have running the show here. But seriously I really want to come visit NZ and get some advice on building a mini jet boat as soon as we are allowed.