Build a Disney World Magicband reader
Рет қаралды 29,740
Күн бұрынBe sure to checkout the latest version of the reader here: • Build a Disney World M...
(IT looks a lot better!)
In this video, we build our own Magicband reader just like the ones at Disney World. Using just a few electronic parts such a Raspberry Pi , a RFID/NFC reader and a 3D printer, you can put all those Magicbands you have laying around the house to some fun use. With a few changes to the python code, it can play different sounds or display different colors based on the unique id of each magic band. What do you think of this build? Let us know in the comments below if you plan to build it. We will see you on the next build.
See latest update video:
• MagicBand Reader Update!
LATEST UPDATES:
• Build a Disney World M...
Github Link for the code:
github.com/foolishmortalbuild...
Thingiverse link for 3d parts:
www.thingiverse.com/thing:446... (NEW!)
www.thingiverse.com/thing:427...
Electronic Parts List:
SCM SCL3711 USB RFID reader: www.amazon.com/gp/product/B00...
If amazon link doesn't work: shop.identiv.com/smart-card-r...
HDMI adapter with audio jack: www.amazon.com/gp/product/B00...
Speaker: www.amazon.com/gp/product/B00...
USB Extension cable: www.amazon.com/gp/product/B00...
5V 3A power supply www.amazon.com/gp/product/B07...
5Volt LED Pixel Strip
www.amazon.com/gp/product/B01...
www.amazon.com/dp/B07MPV42JD/
www.amazon.com/dp/B077J27Y4X/
Wire : www.amazon.com/RGBZONE-Extens...
3-pin wire connector (optional): www.amazon.com/ACTOO-Connecto...
Transparent Filament: www.amazon.com/Filament-Trans...
Gold Filament: www.amazon.com/gp/product/B06...
Welcome Foolish Mortals, we are your hosts, the FoolishMortalBuilders. Kindly step in all the way please and make room for everyone. There's no turning back now, as we reconstruct all things Disney World from replicas to models and everything in between. If you like our builds, say hello and hit the subscribe button, because there are 999 happy items on our chilling challenge build list for upcoming videos.
Hurry back!
#FoolishMortalBuilders
@FinnPub 3 жыл бұрын
I just finished this project as a gift. I appreciate Foolish Mortal Builders for putting this all together. The recipient was PUMPED!
@harryhardacre1644 4 жыл бұрын
Thanks for the 3d print designs that helps a lot. When I was making one of these a while ago, I found that a standby mode where the leds just circle white really makes it seem more real in relation to the ones at Disney World. This was an amazing video you have a new subscriber!
@StraightOnTilMornin 3 жыл бұрын
I love this idea. Any assistance on adding it to the existing code would be greatly appreciated.
@DamonMurphy1 4 жыл бұрын
This is AMAZING!!!! Thank you so much for creating this. I'm looking forward to attempting this!
@PortersTakeOn 4 жыл бұрын
Incredible!!! I had zero intention of getting a 3D printer...dang man! You’re killing me Smalls!
@dpblackwell 3 жыл бұрын
ditto... Which did you end up getting?
@rockedoutstone 3 жыл бұрын
Right once Halloween is over I’m starting this project!
@clairefyfe4785 4 жыл бұрын
Just finished printing all the pieces and the RFID came in today! Going to try and assemble this weekend!
@clairefyfe4785 4 жыл бұрын
What was the best way for you to remove the supports?
@foolishmortalbuilders1462 4 жыл бұрын
@@clairefyfe4785 The 3d print supports always just pop off for me with little effort. Is that not the case?
@clairefyfe4785 4 жыл бұрын
Foolish Mortal Builders No they are being very tough, I’m going to have a look at my print settings tomorrow and see what I can do, I just started using my dads 3D printed and haven’t fully gotten a handle on it yet haha
@cwizardtx 4 жыл бұрын
@@clairefyfe4785 I had several failed attempts before I got gcode that would print nicely. It's definitely a part that needs polyfill, primer fill, sanding, and a good paint job =D
@Dayna092 Жыл бұрын
Thank you for doing this. Very helpful. I wonder what Disney does to make theirs? Mainly the shell.
@gohamm34652 3 жыл бұрын
Once I buy a house I will be doing this and linking it to a smart lock to unlock the door. And using a key chain puck holder
@jaimeramilo2215 2 жыл бұрын
This is just awesome. Have you figured out a way to power the build and the components off of one power source?
@BillsBricks 3 жыл бұрын
this is awesome building mine now
@archangelthj 2 жыл бұрын
I was looking forward to the list of things you had at the end of the video! Any news on those? I hope everything is ok? Thank you for this as well, amazing work, trying my hand at making one soon here
@dazb4440 4 жыл бұрын
Absolutely Brilliant! I’ve purchased almost all the parts we need and I am having a friend print the shell out for me. Would it be possible to get a more detailed setup tutorial for using terminal on a MAC please? Thank you.
@foolishmortalbuilders1462 4 жыл бұрын
There's lots of videos already about using the terminal that are better than what I could do. I would recommend also looking for VI tutorial videos. Let me know how you do.
@nyasiallano7015 3 жыл бұрын
THANKYOU FOR THIS
@MikeOwenNZ 4 жыл бұрын
very cool. I was just in the process of doing something similar myself... wanted to build mine as a doorbell, but using an arduino nano rather than a raspi (need it to be battery powered, using a ultra lower power timer circuit and need a quick boot time). You had way better success with your inserts than I did, for some reason when printed I'd always get a variance in size, so gave up and used hot glue. For testing purposes I also used strip, but going to neopixel rings (when they finally arrive from China). Had to comment when saw you did something similar.
@foolishmortalbuilders1462 4 жыл бұрын
Doorbell. I like that idea. Can't you just pick up the power from your existing doorbell (24v I think) and step it down to what you need? I tried the neopixel rings first, but I liked the way the strips lit up the ring. Let me know how your version turns out.
@MikeOwenNZ 4 жыл бұрын
@@foolishmortalbuilders1462 alas my current doorbell is wireless/battery powered so keen to keep it the same. Just took a quick vid of where I'm up to kzfaq.info/get/bejne/pqhzpc2h3ZbRg6c.html. Now largely on hold til a few more parts arrive (lockdown sucks).
@smithscott119 4 жыл бұрын
@@MikeOwenNZ What did you use for the physical RFID reader and arduino? The one used by Foolish Mortals is USB and they used Raspberry Pi... I do not think it would work on a nano.
@MikeOwenNZ 4 жыл бұрын
@@smithscott119Reader was an RC522 based board using Mfrc522 library w/arduino nano however I gave up getting the reader working(it would read other tags just not my magicband). I have a vid that shows the problem I was having and a teardown and link to repo. I did find another person using the same (search bringmagichome) rfid reader where it worked but only with a magicband where the battery hadn't gone flat (mine were a few years old).
@MikeOwenNZ 4 жыл бұрын
update to my own reply, found an rfid reader that works with Arduino that reads the magicband and was able to get the UID with the same MFRC522 library (dumpinfo example program is a handy to grab the ID), This one works: www.aliexpress.com/item/33020752786.html This one doesn't work (unfortunately the most common one you see around): www.aliexpress.com/item/32899642573.html
@dustindixon8572 2 жыл бұрын
im doing this build for a TT8l gatekeep droid , i want it to read any magic band go from RED led to Green and when it Greens i want it to open a door with 5v signal to a pneumatic foam door . any help or guidance would be awesome
@peacelovehappines9 2 жыл бұрын
Would you be willing to make one for someone with your most updated design and what might you charge for that
@teamguest5113 3 жыл бұрын
I'm new to the maker world and I want to attempt this as my first project with my kids , We want to have the LED lights over my cabinets flash and play the Disney song when the magic band is identified what is your thoughts any suggestions?
@chadontheboat 4 жыл бұрын
Well, this is literally the coolest thing ever.. i have all my parts ordered and am wanting to start thr prints tonight.. what did you use for supports when printing? Ive never really printed anything in a spherical shape. Just applying base supports through cura is making each quarter about a 23 hour print... that sound aboit right? Or are you somehoe positioning this with less supports? Also, what was the reason in doing it in quarters? I was debating combining them into 2 halves to recude the visible lines where they connect. Thoughts? Thanks again for the amazing work into this.
@foolishmortalbuilders1462 4 жыл бұрын
I did it in quarters so it would fit on my 3d printer. You might need to reposition the parts so the flat part of the sphere (where they connect) is on the print bed. If you got the print space, you can definitely combine them into two halves instead.
@knarf247 6 ай бұрын
the rfid reader you suggested isn't sold any more, do you have another recomendation?
@vittorioverta3309 4 жыл бұрын
I. Absolutely love this, im having a bit of a hard time trying to write to the SD through command line it keeps on saying no such file or directory
@foolishmortalbuilders1462 4 жыл бұрын
Use the email link in the about page to send me an email: kzfaq.info/love/n6uokneShVYb6rKnermr2Aabout Attach a screenshot of what you are trying to do.
@vittorioverta3309 4 жыл бұрын
@@foolishmortalbuilders1462 just sent you a Email
@DavidHoltkamp 3 жыл бұрын
Why did you not decide to run the PI and LED's off of the same power supply with both of them being 5V? This seems like it would simplify this a lot and save cost. Granted, you might need to run power over to the port, or solder it different. Any technical reasons that I'm not thinking of why this wouldn't work?
@FredDeckerNC Жыл бұрын
Can anyone help with the sound files? There are many other versions, including the Adafruit version, but I am going with an Arduino Nano instead of all the fuss with a Pi or an RP2040. Then again, a Pi Zero is cheap. Thanks and good job on this build.
@gregoryodom7398 3 жыл бұрын
Would I be able to use a pi Zero?
@chickenfreak 2 жыл бұрын
I am able to get everything printed and put together but i am still having issues with programming the pi. Do you have any recommendations for someone using PC opposed to Mac?
@GrandSport340 3 жыл бұрын
How hard would it be to have the pi power a 12volt relay based on the band id?
@bmanosu 4 жыл бұрын
Thank you, I'm going to try this! (I've about run out of Start Wars helmets to build during quarantine). We've already missed at least one trip to the parks in this and who knows how many more, so this may bring a little magic home to hold us over. Plus it gives me an excuse to have my middle school kids try something with programming a Raspberry Pi that they may be interested in! One Question (So far): Any particular Raspberry Pi board/version you recommend? I'm not guessing this needs a processing powerhouse. Thanks again!
@foolishmortalbuilders1462 4 жыл бұрын
I used a Raspberry Pi 3 B. I have not tried with a Pi 4 yet.
@foolishmortalbuilders1462 4 жыл бұрын
Update - I have tried with a Pi 4 and it worked.
@TheOrlandoWizard 4 жыл бұрын
Your link for transparent Filament leads to Blue, the link for Gold works fine
@foolishmortalbuilders1462 4 жыл бұрын
Fixed,
@joewmorrissey 2 жыл бұрын
For anyone finally getting around to trying this.... make sure you are using the: Raspberry Pi OS Lite (Legacy) Release date: December 2nd 2021 Kernel version: 5.10 Follow the video to install and gain SSH access. Once you are able to SSH in, immediately run raspi-config, get into the advanced section - audio and change to HDMI. Then continue following the video. If raspi-config doesn't show you a HDMI option you installed the wrong version, raspberry has made a change in the latest OS, that took me and Foolish a bit to figure out before Xmas. Also for sounds, make sure you put them in the /home/pi/ directory, not sure if I missed it in the video. PS - want to thank Foolish for taking the time to go through my setup and help sort out what was going on with the new OS not working.
@troymeredith521 11 ай бұрын
Would be able to help with the sound files? I’ve tried contacting the creator via email as noted but I haven’t heard anything. Any help would be appreciated.
@benlam4208 3 жыл бұрын
Would this work with a rasberry pi 2 by any chance?
@Gerkorisa 3 жыл бұрын
I left an issue in the github repo with an error I keep having, pls can you check it when you can? Thanks!
@brittanyviolet4232 4 жыл бұрын
You should definitely sell these! I would buy one!
@cwizardtx 4 жыл бұрын
$150 or so in materials before 3D printing anything though lol!
@CloeandDan 4 жыл бұрын
Amazing! What kind of 3d printer do you have? Or do you have a recommendation for one that's good for a beginner?
@foolishmortalbuilders1462 4 жыл бұрын
I have a Flashforge Dreamer 3d printer. There's tons of videos that recommend printers, you might wan to look around for those.
@CloeandDan 4 жыл бұрын
Foolish Mortal Builders thank you!
@DeltaDawnB767 4 жыл бұрын
I would buy these
@mazzellasolutions5650 4 жыл бұрын
Thanks for posting! Love the idea. Working on printing the parts now. What is the black outer ring used for? (Inside_ringv2.stl) Didn't see it used in the assembly. Thanks!
@foolishmortalbuilders1462 4 жыл бұрын
The ring is for joining the front half of the sphere to the back half. I glued 1/2 of the ring to the front sphere and I used screws to attach the back half of the sphere to the ring. This allowed me to take it off and on easily. It's optional though. You could just glue the two halves together if you are confident that everything is working okay.
@enhidri160 3 жыл бұрын
What printer did you use? I'm curious!
@benwaddell1562 4 жыл бұрын
Hello! Can you make the outer shell a different color? Or does it need to me the gold color. I was wanting silver to match the parks!
@foolishmortalbuilders1462 4 жыл бұрын
You can use any color filament you wish. You still want to use transparent filament for the ring and the mouse face.
@earidescentgenie1166 2 жыл бұрын
First of all THANK YOU #FoolishMortalBuilders for creating this awesome project and sharing 3D files, code, and detailed instructions! I am looking forward to building one myself. I noticed that the instructions stated the sound files are no longer included. Is there a way I can obtain clean sound files?
@joshfineout 4 жыл бұрын
This is amazing. Did you print the files with supports just the way they load into the slicer program?
@foolishmortalbuilders1462 4 жыл бұрын
I'm sure I adjusted them a bit before printing. I use Simply3d but anything will work. (Cura)
@joshfineout 4 жыл бұрын
Thank you!
@georgespaeth812 3 жыл бұрын
If I have all the electronic guts priced out right, it looks like around $140 without shipping!? Not counting the cost of the print itself. This is one expensive thing to make. I've got to give it a go though!
@janiceispog 2 жыл бұрын
Thats so fun! But when you dont have a magic band:
@JonHosford 4 жыл бұрын
The NFC reader you link to is gone. I know I saw you point someone to the compatibility page for the library. Could you post that so i can find a compatible reader?
@foolishmortalbuilders1462 4 жыл бұрын
shop.identiv.com/smart-card-readers/mobile/scl3711.htm
@benwaddell1562 4 жыл бұрын
I was also hoping to get the code so that it would react to my limited edition magicbands based on how it would the parks
@foolishmortalbuilders1462 4 жыл бұрын
Ill be posting an update soon with the code to identify individual bands and some other improvements.
@joshfineout 4 жыл бұрын
Foolish Mortal Builders I was going to start printing this tonight. Should I wait for the updates or the actual printed parts will be the same? Thank you for the time and help.
@foolishmortalbuilders1462 4 жыл бұрын
@@joshfineout 3d print will be the same. Updates are just to the code.
@galathrox2682 4 жыл бұрын
Thanks for posting the designs for this and the code. I've knocked up all the 3D printed parts today, ready for sanding / priming and painting tomorrow. I've never been so excited to prep a print before :) One question if I may. Being based in the UK, I'm having difficulty sourcing an RFID reader like the one used in the video. Are there any specific requirements for the reader or do they all work to the same standard? I've ordered a cheap reader that's the size of a credit card that i plan on hacking apart and adapting to fit into this design, so hopefully I can pull that off :)
@foolishmortalbuilders1462 4 жыл бұрын
nfcpy.readthedocs.io/en/latest/overview.html#supported-devices See list of supported devices.
@foolishmortalbuilders1462 4 жыл бұрын
I added a link in the description to another online store you can buy them.
@galathrox2682 4 жыл бұрын
Nice work :) I found a retailer in the UK selling them, but they are basically twice the cost here than the links you have. The cheap readers I picked up don't look like they will do the job sadly. Pleased to say that the sanding and priming is now done, and most of the electronics arrived this afternoon, so tomorrow will be a fun day of building :)
@jeremybaker4856 4 жыл бұрын
If it is this one www.amazon.com/gp/product/B078TKPRRJ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1, it will not work, The coil is part of the circuit board and dissent fit close enough to scan bands from outside the 3d print.
@galathrox2682 4 жыл бұрын
Correct, I've tried 2 similar designs and gave up in the end and ordered the SCL3711. I've also had a little play with the python script with a friend (mostly him to if i'm honest), so now it searches a directory on the pi containing the wav files, and picks one at random to play. It also checks the length of the sound file and continues to keep the led's illuminated until the end of the file. Pretty neat :)
@Maddhatter3 4 жыл бұрын
Got it all printed up but I'm having issues with the inner ring. Where does that go? It's too big to fit inside the unit, and not quite big enough to have the shell components sit on top of it. Please advise.
@foolishmortalbuilders1462 4 жыл бұрын
It sits half in the front and half in the back shell. with the open end pointing down towards the hole in the bottom of the shells. I glued mine to the front shell, then I connect with screws to the back shell. Send me a picture of what you are trying to do (get email address from the about page on my channel) If you are having troubles getting it to fit, I have a slimmer version of that file you can try.
@Maddhatter3 4 жыл бұрын
@@foolishmortalbuilders1462 ah, yup that makes sense now. I'll reach out should I run into any additional issues. Thanks for the response.
@Gerkorisa 3 жыл бұрын
Hey man, good job with all this, I'm trying to build my own and I already have a Raspberry 3 A+, it's still the same right? Thanks!
@foolishmortalbuilders1462 3 жыл бұрын
Yes that should work. You'll only have 1 USB port I believe, so if you want to switch out the speaker for a USB powered one (see other comments), you'll have to deal with that.
@Gerkorisa 3 жыл бұрын
@@foolishmortalbuilders1462 Thanks! I start building in a couple of weeks (waiting for the printed parts and components to arrive) I have another question, I found myself another rfid reader, but it only supports ISO14443 type A, do I need it to support A and B for this to work? Thanks!
@Gerkorisa 3 жыл бұрын
These are the supported tags for the reader (Mifare 1 K (s50), Mifare 4 K (s70), f08, NTAG203, Ultralight, NTAG213, NTAG215, NTAG216)
@mitsuperboy 3 жыл бұрын
Hi I have scanned my magicbands and I only got the UID of it not any fastpass or DVC is there a way to use any other code like yours fastpass or DVC
@foolishmortalbuilders1462 3 жыл бұрын
All you get is the id of the band. If you want different sequences other than the dvc and fastpass, you have to program the sequence yourself using the settings conf file and uploading new sound files. Nothing is read from the band other than the id.
@stormtrooperguy 3 жыл бұрын
I just got my system working, and I'm trying to track down good sound effects. Any tips? :)
@foolishmortalbuilders1462 3 жыл бұрын
Send me an email (from the about channel page) and I'll email some to you.
@vexinggnat1333 4 жыл бұрын
Is it possible to make this work with phones and Alexa as a smart device as im thinking of making some as christmas presents for my family as we are going next year.
@foolishmortalbuilders1462 4 жыл бұрын
What do you mean by work with phones? Do you mean play sequences from a phone app? (That's something we are considering for a future project.) The current version of the this code does have webhooks support that should work with Alexa - see the latest videos on our channel.
@vexinggnat1333 4 жыл бұрын
@@foolishmortalbuilders1462 By working with phones i mean could the nfc function in a phone be used as a magic band as i dont have a magic band or am able to get one.
@mitsuperboy 3 жыл бұрын
Hi is there any other codes can be readed form the magicbands instead of fastpass DVCWelcomeHome because i would like to do a whole bunch of things Tim
@foolishmortalbuilders1462 3 жыл бұрын
Nothing is read from the band other than the band id number. All sequences are pre-programmed (fastpass, dvc) and are selected randomly or by telling the program which sequence to play based off the band id. If you want other colors and sounds, you just need to define those new sequences in the configuration file. See my other videos for examples.
@mitsuperboy 3 жыл бұрын
Hi again can i use different magicbands to different family members to do different thing, and how does webhooks works I have a smart home so will it work with Alexa, Google Home, Hive, and Energenie?
@cwizardtx 4 жыл бұрын
Well we've been adding features, go check your repo =D
@foolishmortalbuilders1462 4 жыл бұрын
Thanks for the updates! The code has been merged and there's a new video for it.
@cwizardtx 4 жыл бұрын
@@foolishmortalbuilders1462 yeah I saw that..... you redid the ball face and now I have to make another one!
@KevinGrahamArt 4 жыл бұрын
Is there somewhere I could message you directly? I had a few questions, thanks
@foolishmortalbuilders1462 4 жыл бұрын
Use the email ink on the about channel page: kzfaq.info/love/n6uokneShVYb6rKnermr2Aabout
@geraldcullymore1386 3 жыл бұрын
It was a lot easier to take the circumference of the ring measurements and then measure out the same length in LED strip.
@brianlawson567 4 жыл бұрын
Maybe I'm crazy but where does the black semi-circle piece go?
@foolishmortalbuilders1462 4 жыл бұрын
I didn't show it in the video, but it's a support. I glued it to the front side 1/2 way in, then used screws to connect the back shell to the other side. Ill be providing an update soon to show how I used it. It's certainly optional as you can just glue the two shell pieces together instead.
@galathrox2682 4 жыл бұрын
@@foolishmortalbuilders1462 I was considering adapting the support piece to use magnets for easy dis-assemble. Although screwing it does sound a heck of a lot easier :)
@DeadBryan 4 ай бұрын
15:16 magic band reader
@shanedeitzler5718 4 жыл бұрын
Which raspberry pi is needed? 3, 3B+, or 4?
@clairefyfe4785 4 жыл бұрын
I’m curious about this too! I’m trying to figure out which one to use
@foolishmortalbuilders1462 4 жыл бұрын
I used a 3B+ but I recently tested it on a 4 and it worked.
@kmc2227 4 жыл бұрын
the RFID reader comes up as unavailable. Do you have another option?
@foolishmortalbuilders1462 4 жыл бұрын
You'll have to provide me with more information than that. Which one did you use? What is the error message. Did the install.sh run properly? You can re-run it and se if it generates any error messages.
@kmc2227 4 жыл бұрын
@@foolishmortalbuilders1462 I was referring to your link to Amazon for the reader itself. It's not available to buy.
@foolishmortalbuilders1462 4 жыл бұрын
@@kmc2227 shop.identiv.com/smart-card-readers/mobile/scl3711.htm
@AngusTheDoge 2 жыл бұрын
I miss the old disney
@cwizardtx 4 жыл бұрын
Can we define the same band more than once for multiple sounds?
@cwizardtx 4 жыл бұрын
Can confirm this does not work, but it would be an awesome feature!
@foolishmortalbuilders1462 4 жыл бұрын
@@cwizardtx It could be done by changing the sounds: "" variable to an array definition 'sounds' : ['magicband_fastpass.mp3', 'x2.mp3'. 'x3.mp3'] and then change the sound variable to be a randomized selection from that array..... If I get a change this week, I'll update the code to support that.
@cwizardtx 4 жыл бұрын
@@foolishmortalbuilders1462 amazing. Also I'm going to try and do this myself but lets move the configs into a configs file =D
@cwizardtx 4 жыл бұрын
@@foolishmortalbuilders1462 "We're sure foolishmortalbuilders would love a Tip, but unfortunately they have not setup their accounts to receive them yet. We can let them know you were interested. Simply click the button below and we'll pass along a note to them."
@milesl217 3 жыл бұрын
Hey can it work on a pi 4 ? I really wanna make it
@foolishmortalbuilders1462 3 жыл бұрын
Yes
@milesl217 3 жыл бұрын
@@foolishmortalbuilders1462 thanks
@colette8196 4 жыл бұрын
Are you selling these already constructed???
@foolishmortalbuilders1462 4 жыл бұрын
No, it would cost a lot for me to build these and sell them.
@jeremybaker4856 4 жыл бұрын
Im trying to replicate this....I am ssh to the pi and am trying the tar xf magicband_dist.tar tar: magicband_dist.tar: Cannot open: No such file or directory tar: Error is not recoverable: exiting now I get the above error, not sure what Im doing wrong. Maybe I did not place the files from GitHub correctly?
@foolishmortalbuilders1462 4 жыл бұрын
When you click the green clone button from github and then click "Download ZIP", you will actually get a file called magicbandreader-master.zip. This is the file you should transfer, in the video I used the tar as that's what I had at the time of filming. SCP this file over to the pi and run "unzip magicbandreader-master.zip" instead of "tar xf" command. OR you can unzip on your computer and SCP each of the files individually over to the pi. Hope that helps.
@jeremybaker4856 4 жыл бұрын
@@foolishmortalbuilders1462 Thanks for responding, unfortetly still stuck. Im not familiar with SCP so I simply put the sd card into my mac and copied the .zip over, when it still fails to extract, I then just extracted it on my mac and copied files to sd card but then still install does not work. pi@raspberrypi:~ $ unzip magicbandreader-master.zip unzip: cannot find or open magicbandreader-master.zip, magicbandreader-master.zip.zip or magicbandreader-master.zip.ZIP. pi@raspberrypi:~ $ sudo sh install.sh sh: 0: Can't open install.sh pi@raspberrypi:~ $
@foolishmortalbuilders1462 4 жыл бұрын
@@jeremybaker4856 Use the email link in my channel about page , to send me an email and I can help. kzfaq.info/love/n6uokneShVYb6rKnermr2Aabout
@Oddbodswithme197 Жыл бұрын
14:51 man says multople
@cwizardtx 4 жыл бұрын
How do we identify new magic bands?
@cwizardtx 4 жыл бұрын
Nevermind figured it out with my phone =D
@foolishmortalbuilders1462 4 жыл бұрын
Check the update video : kzfaq.info/get/bejne/d7WbZNVjsZm5cp8.html
@cwizardtx 4 жыл бұрын
@@foolishmortalbuilders1462 yep now to add in phillips hue integration, IFTTT and/or webhooks!
@cwizardtx 4 жыл бұрын
@@foolishmortalbuilders1462 have you considered fixing up the face plate to look a little closer to the park version, I think I might print ALL the face pieces in clear instead of the covers that are there now
@minimeisters3905 3 жыл бұрын
Eric- I have everything working but cannot get the magic band ids even though the settings is set to true. Do I need to type a command before they show up in putty?
@nathanc.4862 4 жыл бұрын
You should sell these.
@BillsBricks 3 жыл бұрын
having issues with that speaker its not loud at all
@foolishmortalbuilders1462 3 жыл бұрын
Try this speaker instead (or a similar powered one) www.amazon.com/Portable-Mini-Capsule-Speaker-System/dp/B007OYAVLI
@BillsBricks 3 жыл бұрын
@@foolishmortalbuilders1462 thanks !
@taramarie8071 4 жыл бұрын
Do you sell?
@foolishmortalbuilders1462 4 жыл бұрын
No, it would cost a lot for me to build these and sell them.
@anaphelps7687 3 жыл бұрын
Has anyone tried this build with a raspberry pie zero?
@foolishmortalbuilders1462 3 жыл бұрын
Yes. A Pi Zero will work.
@dpblackwell 3 жыл бұрын
@@foolishmortalbuilders1462 is there any loss of functionality by using the Pi Zero? Or, is there any compelling reason(s) to use the 3 or 4?
@cwizardtx 4 жыл бұрын
Worked great for an hour and now the LEDS won't come on any more, troubleshooting......
@foolishmortalbuilders1462 4 жыл бұрын
Do they flash three times when the pi is powered on?
@cwizardtx 4 жыл бұрын
I broke the contact on the data bending it back and forth too much
@cwizardtx 4 жыл бұрын
So now I get to see whether or not I can solder on those three little tiny spots
@bryce6713 4 жыл бұрын
Lol @ 15:05
@cwizardtx 4 жыл бұрын
I found this, it looks like the lights can be controlled by SPI intead of PWM eliminating the need for the HDMI dongle: github.com/jgarff/rpi_ws281x
@foolishmortalbuilders1462 4 жыл бұрын
Thanks. I'll give it a shot.
@cwizardtx 4 жыл бұрын
@@foolishmortalbuilders1462 I didn't fool with it at all but pulling that HDMI adapter out of the mix would be cool lol.
@mitchellrclay 3 жыл бұрын
Don't need SPI when you can just use another GPIO port, neopixels work with PIO10, GPIO12, GPIO18 or GPIO21 but 18 is the standard. No need to over complicate it.
@johnharris2950 3 жыл бұрын
Want to sell that? 😁
@mgdotnet Жыл бұрын
Too bad the raspberry pis cost an arm, 2 legs, and your first born.
Sergio Outdoors
Рет қаралды 83 МЛН
Arslan khan_007
Рет қаралды 16 МЛН
Стильное с WB⚡️
Рет қаралды 6 МЛН
andrejko_epta
Рет қаралды 27 МЛН