Рет қаралды 38,414
Follow along with Smithsonian research technician, captain and MATE-ROV mentor Woody Lee as he demonstrates a step-by-step buildout of an underwater Remotely Operated Vehicle (ROV)! This video is an in-depth, start-to-finish instructional video that shows you how to fully build and wire up your own underwater ROV at home.
WARNING: This ROV is designed and intended for use in FRESH WATER ONLY! Marine and brackish water will corrode the parts and interfere with the electrical systems of this design.
ALWAYS ask a parent or guardian for assistance when using power tools and batteries.
For a full parts and tool list, be sure to check out our distance learning page here: naturalhistory.si.edu/researc...
-----
00:00 - Introduction
00:54 - PVC pipes and fittings
04:31- PVC frame build
11:52 - Tool post/hook
13:35 - Thruster installation
17:49 - Finished frame
19:03 - Wiring thrusters
24:13 - Wiring thrusters to tether
39:25 - Control box hole pattern
41:46 - Wiring the control box
48:56 - Wiring switches
58:26 - Mounting switches in control box
1:01:28 - Wiring switches to tether
1:09:29 - Hot glueing power and tether cables
1:10:54 -Battery clamps and fuse holder
1:14:18 - Trouble shooting switches
1:21:24 - Cable strain relief
1:23:16 - ROV in the water!