Build the 1:8 Scale Batmobile Tumbler from Hachette Partworks

Build the 1:8 Scale Batmobile Tumbler from Hachette Partworks - Part 53-58

Рет қаралды 8,203

Күн бұрын

This is now a full product run from Hachette Partworks available in the UK at
batmobile.hachettepartworks.com/
This 1:8 scale vehicle from the Christopher Nolan Dark Knight Trilogy is now available to build from the folks over at Hachette Partworks.
00:00 - Introduction
01:24 - Stage 53 - The Inner Bulkhead
04:06 - Stage 54 - Upright Crossbars and Connectors
06:11 - Stage 55 - The Floor of the Front Sections
09:45 - Stage 56 - Mounting, Pistons and Shock Absorbers
13:08 - Stage 57 - The Engine Panel
14:17 - Stage 58 - The Roof
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my channel at
PATREON : / worldofwayne
KZfaq MEMBERSHIP : bit.ly/WowMembership
----------------------------------------------------------------------------------------
My Social Media, Merchandise and Amazon store can be found at :
www.linktr.ee/worldofwayne
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#batman #tumbler #batmobile #thedarkknight

Пікірлер: 50

@WorldofWayneUK 4 ай бұрын

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. Did you know, you can now support World of Wayne by joining the channel membership program at bit.ly/WowMembership and get exclusive features for KZfaq. Alternatively, you could join my Patreon for $1 and still get access to member live streams and behind the scene news. My patreon channel can be found at www.patreon.com/worldofwayne . Thank you all for your continued support. I really appreciate it

@davidspencer8373 4 ай бұрын

Like video

@ZenStudiosCO 4 ай бұрын

I really like the charring on the exhaust pipes and on the turbine cone. They're little details that make a difference when you look at it close up :)

@brianmcdonald3831 4 ай бұрын

Ah it’s the little things in life that make us laugh right Wayne! 🤣

@The12thDimension. 4 ай бұрын

Seeing the size of the afterburner in your hand gives a good idea of just how gigantic the finished vehicle will be. I'm expecting big things from this...

@robertoscoma6165 4 ай бұрын

Hi Wayne! Greetings from Italy🇮🇹👋👋. We in Sicily have sun every day 😂😂. Congratulations on the construction, you are a few numbers ahead of me. 👏👏👏 If you try to join the rear bulkhead to the frame you will realize the exact length of the model. Think about it!! beyond the front wheels there is nothing left as well as beyond the exhaust cone. Greetings👋👋

@victorbaugh1355 4 ай бұрын

Love this build so much wish they would bring this back and for the U.S as well

@josephconstante1222 4 ай бұрын

Yes I would love this in the US, I'm subscribed to the 66 batmobile and this would be great.

@victorbaugh1355 4 ай бұрын

@@josephconstante1222 I would do the batmobile but currently I'm doing r2d2, Nissan, E.T, and Eleanor

@julianmhall 4 ай бұрын

*LOL* In the intro I thought you were pointing at your head Wayne, and I thought 'Has he polished it? Ohhh the yellow round thing in the sky.. yeah what's that about? And why is the sky that funny blue colour?' (Yes, I live in Wales *lol*)

@theukpennywise208 4 ай бұрын

Looks really good wayne hope you and the family are good x

@WorldofWayneUK 4 ай бұрын

Getting .much better now. Always seem to get ill between Jan and March lol

@eddywells5689 4 ай бұрын

Great vid and build

@rogerdowning861 4 ай бұрын

It's starting to look good Wayne....it's about time mate. P.s great video.

@theworldofdaitrapp1515 4 ай бұрын

Yeah, you can still get this from the website, you can subscribe, or order any issue up to 55.

@thechids350 4 ай бұрын

It’s going to be good when complete but like you said some stages very little to do I think they were just trying to spread it out over a given amount of stages which sometimes leaves you wanting more

@timevergreen3619 4 ай бұрын

Batmobile tumbler

@simongunstone3356 4 ай бұрын

I see when you had the frame in the cockpit from issue 54 it says to add 2 screws to secure it but I found them impossible to fit, looking at your video you didn't bother fitting them either

@WorldofWayneUK 4 ай бұрын

Yer. Didn't bother at all

@Thalon77 4 ай бұрын

I like the idea of using paper and cardboard for the packages, it's more environmental friendly.

@timevergreen3619 4 ай бұрын

Yeah cutting down trees is very environmentally friendly 👍

@johnmortimer7782 4 ай бұрын

What's with those cable ties on the suspension Wayne?

@WorldofWayneUK 4 ай бұрын

I had anpart break off. I have glued it back in

@petelewis9026 4 ай бұрын

Great build Wayne 👍🏻

@FigureNerd108 2 ай бұрын

👋 nice work. So how much in total would estimate the complete cost of this project? Hope you do t mind me asking.

@WorldofWayneUK 2 ай бұрын

Most of these models come on around £1200

@sandipgohil-rx7vf Ай бұрын

How did you secure the bracket inside without the screws (which I can't figure out anyway)? As any time i try putting the bracket into the front it falls apart Then when i tried to secure the front onto the frame with the screws in the bottom it falls off the bulkhead. As the back frame is wobbly, even though i tightened it as much as i could.

@allanramsay8695 4 ай бұрын

If you read the instructions the bracket inside the front needs to be secured with screws

@WorldofWayneUK 4 ай бұрын

Yep. That's pretty impossible I gave up on that lol. I would need a really tiny screwdriver or a right angled one

@timothypoll08 4 ай бұрын

@@WorldofWayneUK I was scratching my head at that stage, came back to re watch your video to see if i had missed how you did it...ordered myself a right angled ph0 from Amazon, should be here today.

@joshtaylor6911 4 ай бұрын

Hi Wayne! So im building this one too and I cannot for the life of me see how the front suspension will work? Im not up to that issue here yet, I can see that there are two copper coloured springs above the frint suspension arms. I cant see how they spring the whole setup as the small arms that come up to meet those springs are loose on the lower suspension arms? Ive followed everything correctly so far (at least I think I have?) and I still cant see how it works? A bit vague without photos I know, I trust it works out somehow?😊 Cheers mate.

@WorldofWayneUK 4 ай бұрын

Yer the suspension is more of a "for show" I don't think it practically does anything

@joshtaylor6911 4 ай бұрын

@@WorldofWayneUK thanks!😃

@mickpurcell272 4 ай бұрын

Hi Wayne could you tell me what glue u use on this build please and we're to purchase it from

@WorldofWayneUK 4 ай бұрын

It's a brush on glue from the Range stores in the UK

@mickpurcell272 4 ай бұрын

Whats it called Wayne as this is totally new to me,this is my first ever build @@WorldofWayneUK

@WorldofWayneUK 4 ай бұрын

Its just called Glue It. You have to go in store as its not online. Alternatively Gorilla brush on glue is available from Amazon @@mickpurcell272

@2005portensie 4 ай бұрын

Where did you get that shirt?

@WorldofWayneUK 4 ай бұрын

It was from a company called hubcloset that sadly no.longer exist

@wbrownshadow 4 ай бұрын

Technically Ghostbusters 5 but 4 if you feel the 2016 movie was a really bad joke

@katieblake4931 2 ай бұрын

You can still get it but it is not on offer

@ianlongley110 4 ай бұрын

Take it you didn't do the BM screws in the cowl to hold the plastic frame,no way in hell you can get them in there anyway

@WorldofWayneUK 4 ай бұрын

Nah

@matthewcoleman8267 4 ай бұрын

If this was the only model you were building, would you be pee'd off at these 'stages' with so little to do?

@WorldofWayneUK 4 ай бұрын

Yep.

@riccardoangioli1633 4 ай бұрын

Ritengo che aumentate il prezzo di 1 euro a metà dell'opera sia scandaloso visto che poi per molti numeri ci danno solo 1 pezzo x giustificare 120 uscite