Build The TAMIYA VW Beetle Disney Herbie version

Рет қаралды 27,141

Жыл бұрын

Build The TAMIYA VW Beetle Disney Herbie version
#modelcar #beetle #scalemodel
Index
0:31 Engine
3:22 Chassis
5:47 Body Painting
11:25 Car trunk
12:26 Inside the Car
17:20 Roof ruck
26:23 Finish work
28:29 Complete Photo
　
TAMIYA 1/24 VW Beetle Disney Herbie
*About the kit
I made it before, so this is the second one.
I tried to make it better than last time.
The famous Beetle movie is Disney's Herbie, and I think Beetle fans enjoyed watching it.
The Beetle with the number 53 and red, white, and blue lines is the most famous Beetle in the world, and many Beetle fans enjoy custom-painting Herbie.
The Beetle in the movie is a 63-year model, but Tamiya is a 66-year model. Although the model year is different, I made it by referring to Herbie's painting and attaching a roof rack for leisure use.
*roof rack
I made a roof rack with 0.8mm, 0.5mm nickel silver wire and 0.3mm brass wire.
The legs of the roof rack are covered with vinyl, and the fixing bracket is in the middle.
The luggage is two trunks, a vintage cooler box, and a guitar case, all made of 0.5mm and 0.3mm plastic board.
I put a tissue on the trunk to give it a texture.
Each detail is finely crafted.
With elaborate accessories, you can cover up the appearance even if the car is not very complete.
*assembly
As the person who made this kit knows, the combination of the hood is bad.
I put a plastic plate on and adjusted the gap.
However, after assembling, I realized that this gap is important for opening and closing the hood.
Next time I would like to make a Vintage motorcycle with a garage.
Let's meet again!
thank you very much.
* TAMIYA 1/24 VW Beetle

Пікірлер: 80

@tcandle695 Жыл бұрын

Wow 😯 another master model. Very nice VW Beetle 🐞. Love the Love🐞.

@scalemodeler Жыл бұрын

Thank you so much❣️I love beetle and Disney movie the love bug❣️

@color63ch Жыл бұрын

毎回思うのですが …塗装はもちろん凄く好きですが細かいところの組み立ても凄いですね🤩👍

@scalemodeler Жыл бұрын

こんばんは！ありがとうございます！車の模型に慣れてきた頃に手抜きを覚えてしまうので、コメント頂いて、ちょっと身を引き締めてもっとコダワリたいと思います。ありがとうございます❣️

@85hako49 Жыл бұрын

いいですねえ。ノスタルジックで心があたたまりますね。

@scalemodeler Жыл бұрын

そうですねえ。ガレージとお小遣いと貯金に余裕があれば、ポツンと置いて、週末は運転席から星空見たい車ですね。

@ovidiuschley3346 Жыл бұрын

Wow , that's hat's a great 1/24 scale , Volkswagen Beetle (Herbie) , from Tamiya and the project is absolutly fantastic and very well detailed and realistic . Thank you so much for sharing , my friend !🙏🏻🎩👌🏻👏🏻👏🏻👏🏻🏆🏅🤝🏻

@scalemodeler Жыл бұрын

Thank you very much 😊 There are many Old Beetles running in Japan. Japanese people love the Beetle!

@user-bm6fc6fi7e Жыл бұрын

お疲れ様です😀 やっぱり素晴らしい👏👏👏👏 内装もボディーも洗車したいくらいですよ👍 トランクとギター🎸を乗せて何処へ旅しましょうか🤗 腹減ったらお菓子とケロックコーンフレークがありますからねって感じて風景が見えます😌

@scalemodeler Жыл бұрын

ありがとうございます。矢作さんの好きなバドを入れると飲酒運転助長と言われそうなので、控えました！次回の車はシートの下にでも隠しておきます！

@supercededman 11 ай бұрын

Heavens, this build is sublime. You have incredible skill, my friend. Simply watching the video is both relaxing and inspiring.

@scalemodeler 11 ай бұрын

thank you! I am very happy. I will continue to strive to improve my technology.

@user-od5gi4pk6r Жыл бұрын

このウェザリング、この色の出し方、いや～、感動ものですテクニックも相変わらずで（良い意味で）ため息です解りやすく解説して頂いているので勉強になりますこのテクニックでカルマンギアも観てみたくなりますw

@scalemodeler Жыл бұрын

こんばんは！フォルクスワーゲンのカルマンはタミヤのキットを持っていますので、イメージが膨らんだ段階で作ります。ワーゲンって、どこかくすぐられるんでよね😊😊

@user-od5gi4pk6r Жыл бұрын

カルマン、楽しみしておりますネ！

@scaleartsg Жыл бұрын

sugoi! kirei desune! Well done! Keep it up! very relaxing jazz music!

@scalemodeler Жыл бұрын

Thank you❣️My friend 😊In Japanese “Arigatou gozaimasu. Watashi no tomodachi “

@user-ks5nu9pb3d Жыл бұрын

まさにハービーがそのまま模型になったような感じで感動モノです…！自分もいつかこんな模型が作れるようになりたい。

@scalemodeler Жыл бұрын

ありがとうございます。ハービーが好きな人は沢山いますので、しっかりと作ろうと思っていましたので、とても嬉しいです。共に模型ライフを楽しめればと思います😊

@warrenbennett1355 Жыл бұрын

Atleast herbie is one thing Disney hasn't made gay. Great build looks absolutely perfet

@scalemodeler Жыл бұрын

Thank you for the valuable information that Japanese people don't know 😊

@vinsblack2 5 ай бұрын

your works are absoultely stunning particularly gave shaped the magazine,pringles snack,and so on into subminiature,how did to make it🤩

@scalemodeler 5 ай бұрын

I take photos of the actual item, scale it down, print it, and assemble it. The case etc. are made of plastic board. Thank you for your comment!

@laurentbouveyron5362 Жыл бұрын

superbe j'adore ce que vous faites

@scalemodeler Жыл бұрын

Merci beaucoup. Je suis très heureux de lire les commentaires des Français. J'aime les rues de France, la campagne et les voitures.

@laurentbouveyron5362 Жыл бұрын

@@scalemodeler avec grand plaisir merci a vous

@mr.wandererjp Жыл бұрын

アイデアやテクニックに加えてセンスも良いから真似したくてもなかなか出来ないです。観察力というか知識もないとここまで出来ないですよ、すごい！

@scalemodeler Жыл бұрын

ワーゲンは街角で見かけると、ドライバーさんに声掛けて写真撮らせてもらうくらい好きです。ボディーに共振してるようなエンジンの音もまた格別なくらいです。コメント、ありがとうございます😊

@mr.wandererjp Жыл бұрын

@@scalemodeler あの独特のスタイルやエンジン音のファンは多いですね、私もその一人です。これからも頑張ってください！

@HelloProjectAudience Жыл бұрын

今回もまた、素晴らしい出来栄えです！小物の配慮なども特級ですまたこれを「イージー」と豪語してしまうあたりも畏怖です

@scalemodeler Жыл бұрын

やっぱり、ビートルにはルーフラックに鞄類ですよね。この先、ビートルのような車は燃費、安全、環境の諸事情から現れないでしょうね。模型だけの楽しみです。ありがとうございます！

@frankiehobby Жыл бұрын

It’s very lovely 🎉

@scalemodeler Жыл бұрын

Thank you❣️🇯🇵Arigatou gozaimasu 😊

@lucaabys90 Жыл бұрын

😮😮😮😮 Amazing

@scalemodeler Жыл бұрын

Thank you ❣️😊😊😊

@ozstrider Жыл бұрын

Looks amazing. I am very inspired by your finished models, they are very peaceful. Where do you get the small metal wires and tubes? Do you have recommended sizes for detailing?

@scalemodeler Жыл бұрын

I purchased most of them from Amazon. Wires are 0.4mm, 0.5mm, 0.6mm. The metal wire is 0.3mm, 0.4mm, 0.5mm, 0.8mm brass wire and nickel silver wire. Thank you for your comment. I am very happy!

@w89mando Жыл бұрын

😮 amazing

@scalemodeler Жыл бұрын

Thank you❣️😊

@robertesplin8875 Жыл бұрын

Just lovely!

@scalemodeler Жыл бұрын

Thank you😊😊

@marcosbautista3078 Жыл бұрын

hermoso trabajo

@scalemodeler Жыл бұрын

Gracias. Me gustaría viajar a su país algún día.

@charliered420 Жыл бұрын

Really great work! Seems as if you had a problem with the front 53 being unable to mask the central edging, you could solve it by using the technique that the Disney prop department used: cut the sticker in half and put each one on each side of the edging. Then cover it up with a central strip to make it look as if it's all one piece! Hope this helps.

@scalemodeler Жыл бұрын

Thank you for your advice! The concealing power of commercially available decals was low, and the bottom color was exposed, so I had no choice but to paste it on the edge. From now on, I will use the technique of cutting the decal in half and pasting it on the uneven part that you taught me. Your advice is very helpful for my model making. Thank you so much !

@charliered420 Жыл бұрын

To make the stripes and numbers go cleanly together without the stripe underneath showing through, you can cut a circle outline on the stripes where you'd put on your numbers

@scalemodeler Жыл бұрын

@@charliered420 It's an advanced technique, but if I don't try it, my technique won't improve, so I'll take on the challenge. Thank you very much. Your advice is very helpful!

@charliered420 Жыл бұрын

@@scalemodeler No problem!

@carfran53 Жыл бұрын

Dear friend, with your skill, you have put modeling to another level.Enjoyed the whole video. And I will never get tire of repeating it, your attention to detail is exquisite.

@scalemodeler Жыл бұрын

I'm Japanese, so I don't know real American or European history or customs. However, I am making models so that Americans and Europeans will not feel uncomfortable as much as possible. Please correct me if I'm wrong. Thank you very much.

@tomsvenkesen6473 Жыл бұрын

A state of art.👍👍👍👍👍👍

@scalemodeler Жыл бұрын

Thank you❣️❣️❣️❣️😊

@hernanyepes4726 Жыл бұрын

your work is incredible, I am seeing you from Colombia and I would like to know if you have an online course to learn more about your work

@scalemodeler Жыл бұрын

Thank you very much. I don't speak English, so it's hard to show you how to make a model online. I'm so so sorry.

@salvatoretrambarulo8753 8 күн бұрын

Great work! What liquid do you use for soldering? Thanks!

@scalemodeler 8 күн бұрын

It's flux. Accelerates metal soldering. thank you.

@espeso51ch Жыл бұрын

はじめまして動画拝見しております。素材、工作、塗装と参考になります。苦労や挫折や失敗もあるけど、あれこれ工夫し完成した時の達成感。ジャンルも多々あるけど、模型ってやっぱり楽しいなと改めて感じました。今後の動画も楽しみにしております。

@scalemodeler Жыл бұрын

はじめまして、コメントありがとうございます。旧車をブサイクに作るのが好きで、こんな感じですけど、見ていただいてホントに嬉しいです。これからもお時間ある時是非お越しください！時間を潰して良かったと思える動画を作りたいと思いますので、叱咤含めてよろしくお願いします。

@DanielRibeiro-sp5wz Жыл бұрын

Ganhou mais um inscrito.... parabens. Seu cuidado nos inspira a procurarmos sermos assim

@scalemodeler Жыл бұрын

Obrigado pelo seu comentário! Continuarei a fazer modelos que possam satisfazê-lo!

@carzenriq Жыл бұрын

Incrível!

@scalemodeler Жыл бұрын

Obrigada.😊

@goforitpainting Жыл бұрын

Really cool Herbie model. My version is a bit rusty. :)

@scalemodeler Жыл бұрын

Thank you so much❣️

@pauloreissjunior4772 Жыл бұрын

Congratulations from Brazil, your work is excellent, what adhesive do you use to temporarily fix the rack before soldering?

@scalemodeler Жыл бұрын

I didn't use the initial glue before soldering. However, since it is a nickel silver wire, a primary for metal is applied. Thank you.

@jasmine7576 Жыл бұрын

ルーフラックをハンダ付けするときPCディスプレーに「フーッ！」する私！

@scalemodeler Жыл бұрын

あっ、それ❣️😂

@edhoffman7691 10 ай бұрын

I love your vision and aesthetic. I have a question about technique. After you layer the stain brown and ground brown, you are removing with the Q-tips. At that time, are the washes wet, part dry or fully dry? Are you using thinner/solvent on the Q-tip? Thank you. I look forward to trying your technique on a Bronco to replicate the 1:1 scale 1975 Bronco that I drove in the 1990's!

@scalemodeler 10 ай бұрын

In the case of rust expression, the surface is dry. If the color appears dull, it is wet. I use a special thinner, but nothing else. However, there are no set rules when it comes to wet and dry conditions, and we use effective methods. I hope your Bronco is great! Thank you❣️

@edhoffman7691 10 ай бұрын

@@scalemodeler Arigato Gozaimasu!

@ChoosePhilippinesPeaceLove Жыл бұрын

🎉❤🚗💨

@scalemodeler Жыл бұрын

Thank you❣️😊😊

@NICCATSA 5 ай бұрын

Una Honda Shadow Aero 750, 2008 (color negro) 🙏🏼🏍 tambien una Honda Rebel 250, 2005 color naranja (es la de mi pareja) 🥸😅❤

@scalemodeler 5 ай бұрын

Unfortunately, there is no Honda Shadow model kit and Rebel model kit. sorry!

@CalebTheBusyEngine59 11 ай бұрын

I Would Like To Ask, Does It Roll Around?

@scalemodeler 11 ай бұрын

The tires will rotate. Thank you.

@CalebTheBusyEngine59 11 ай бұрын

@@scalemodeler That Is Wonderful!

@fredericdobbelaere7725 Жыл бұрын

Qu'elle patience pour confectionner les bagages, l'étui de guitare, la galerie de toit et pour les nombreux détails que vous avez apportés à la maquette !!🙂👍 je suis impressionné et bluffé !! Vous êtes un artiste du modélisme 🤩🇨🇵🇯🇵👍

@scalemodeler Жыл бұрын

Merci beaucoup pour votre très gentil commentaire. Les voitures européennes ont une relation profonde avec les humains, c'est donc amusant de faire des voitures avec une conscience de la vie quotidienne !